Plastics Moulds - Current News Articles
Articles on Plastics Moulds. Daily updated information and news from the plastics industry.
-
EWIKON - introduced MH HPS III jets with direct lateral injection
- 16.12.2011
- Plastics Moulds
Due to continuous development and improvement of technologies in areas such as multiple jets and wide exposure of specialists in the field of plastic injection molding, it is possible to inject the most complex applications with elegant and reliable...
-
GLASTHERM - thermal insulation for the purpose of insulation forms
- 21.11.2011
- Plastics Moulds
Use insulation boards is one of the basic requirements of sound and efficient functioning of the forms. Contribute significantly to reducing energy losses. Properly insulated forms conserve energy and also leads to better regulate the temperature inside the...
-
Cylinders for dialing forms with integrated gear
- 07.11.2011
- Plastics Moulds
To reduce molds size, acceleration of production and simplify the handling company VEGA in collaboration with Jan Svoboda Ltd. has developed cylinder with integral gear for insertion into the...
-
Software for the analysis of injection molding
- 26.10.2011
- Plastics Moulds
Cadmould ® 3D-F is a simulation software to analyze injection molding, whose calculations are based on a proprietary 3D model that was developed by German company Simcon GmbH. The genesis of the software involved (and to continue to cooperate in its development), Technical University of Aachen...
-
Injection moulding costs optimazing
- 23.09.2011
- Plastics Moulds
How to preserve the company experts´ know-how? The Expert System CalcMaster 7.2 software working on the reflected wave principle brings new possibilities in the offer and demand process of moulds for plastics and light metals. The system integrates the issues of price and quality in relation to...
-
Producer and innovator hot runner firm Mold-Masters presents news at autumn fairs MSV 2011 and FAKUMA 2011
- 19.09.2011
- Plastics Moulds
Leading manufacturer and innovator hot runner firm Mold-Masters owning over 50% patents field will present the on next two fairs in Brno Engineering Fair and in Fridrichshafen on Fakuma their novelties you certainly surprise and impress its designs and outputs enabling maximize and optimize...
-
Latest hot runner system
- 02.09.2011
- Plastics Moulds
Thermoplay Company has more than thirty years experience in the development of modern technologies in the industry, pressing and molding plastics. The face of ever-increasing customer requirements by continuously investing considerable resources in Thermoplay analysis and development of advanced...
-
TOOLOX33, no compromises on form stability
- 17.08.2011
- Plastics Moulds
- Design of molds
Why does HASCO recommend TOOLOX33 to its clients as a better alternative to the conventional materials 1.2311 and...
-
Technological innovations in the latest applications in the automotive industry
- 10.08.2011
- Plastics Moulds
Processing of plastic materials is very well developed automobile industry. Vehicle manufacturers are focused on reducing vehicle weight, lower power consumption and energy optimization of production processes, including reducing...
-
Heating with a new high-performance heating layer: Jets are now slim, have more power and are more economical
- 22.07.2011
- Plastics Moulds
Heisskanaltechnik Günther GmbH has introduced a new, powerful and energy efficient technology BlueFlow © nozzles first to K2010 in Düsseldorf. These nozzles are all new heating system other than a thick, rigid and large energy...
-
06E “Plug ‘N Play”® threaded nozzle and bolt-on valve gate actuator
- 24.06.2011
- Plastics Moulds
SYNVENTIVE introduces new 06E “PLUG ‘N PLAY”® hot runner system feturing threaded (screwed- in) Nozzle and bolt-on valve gate...
-
Construction tips of company Strack Normalien
- 22.06.2011
- Plastics Moulds
As every year, even now the company Strack Normalien enlarges its catalog offers with new or improved components, such as following two new...
-
Technological innovations in injection molding for parts with large dimensions
- 20.06.2011
- Plastics Moulds
Company Thermoplay SpA has developed a new hot runner system for molding parts with large dimensions, such as bumpers, spoilers, racks for car body and trucks, but also large parts in home electronics industries and variety of packaging...
-
Universal frame molds for prototypes and small series
- 16.05.2011
- Plastics Moulds
- Design of molds
- Standardized parts
K3500 Universal frame forms developed by HASCO, meets all requirements for the production of samples, prototypes and production in small quantities at low cost. It consists of a frame form in dimensions 156x196 mm, 246x296 mm, 296x396 mm and shaped inserts K3520 / K3501 and ... / ... with built-in...
-
PVC: Technological innovations in injection molding
- 08.04.2011
- Plastics Moulds
Conversion of PVC material and its compounds, which is one of the most widely used plastic materials in the construction industry, food and pharmaceutical industries, medicine, electrical equipment for industrial and packaging technology, is constantly...
-
ORYCON launches a new generation of low-profile multiple nozzles „Pan-cake“
- 06.04.2011
- Plastics Moulds
- Control technology
ORYCON EU interoduces a novelty in its range of multiple jet designed for injection molding with close location to each other in mould for up to 4...
-
Faster pressing optimal cooling - a comprehensive program of Parker Rectus couplings that exist on all systems
- 10.03.2011
- Plastics Moulds
Tools for injection molding enables the production of large quantities of plastic components. Therefore, the duration of one cycle - ie the time between two lisováními - depends not only on the size of the molded part, but partly also on cooling. Faster cooling of injection molds means increasing...
-
New single jet with a simple heating
- 10.01.2011
- Plastics Moulds
The new generation of simple jets with a new concept was designed and developed by Thermoplay to optimize different temperature control zones, reduce costs and simplify the electrical...
Latest Classifieds
-
16.05.2024 | ID: 202419161
Top Advert -
03.05.2024 | ID: 202419068
Top Advert Cooperation: Plastic injection - free production capacity
20.02.2023 | ID: 202316585
Top AdvertTo purchase: We are looking for regrinds and plastics producion waste
12.06.2024 | ID: 202419347
For Sale: TECHNIL A218 V25 black
12.06.2024 | ID: 202419346
-
11.06.2024 | ID: 202419344
-
10.06.2024 | ID: 202419342
-
16.05.2024 | ID: 202419161
Top Advert To purchase: We are looking for regrinds and plastics producion waste
12.06.2024 | ID: 202419347
To purchase: Package quality LDPE film. 500 t/month
10.06.2024 | ID: 202419334
To purchase: Dirty granulates from ground
10.06.2024 | ID: 202419331
To purchase: PA 6/66 GF 30 regrind
10.06.2024 | ID: 202419313
To purchase: PA 6/66 GF 30 regrind
03.06.2024 | ID: 202419277
To purchase: Production of rubber or plastic gears
27.05.2024 | ID: 202419255
-
03.05.2024 | ID: 202419068
Top Advert For Sale: TECHNIL A218 V25 black
12.06.2024 | ID: 202419346
-
11.06.2024 | ID: 202419344
-
10.06.2024 | ID: 202419342
-
10.06.2024 | ID: 202419341
For Sale: PA 6.6 Ultramid A3U42G6 grind
10.06.2024 | ID: 202419340
For Sale: Color Masterbatches on LLDPE carrier
10.06.2024 | ID: 202419339
Upcoming Events
14.06.2024 - 17.06.2024 | Chennai
18.06.2024 - 20.06.2024 | Stuttgart
Electric and Hybrid Vehicle Technology Expo 2024
18.06.2024 - 20.06.2024 | Stuttgart
19.06.2024 - 22.06.2024 | Bangkok
Plastics Recycling Show Europe 2024
19.06.2024 - 20.06.2024 | Amsterdam
26.06.2024 - 28.06.2024 | Sao Paulo
26.06.2024 - 28.06.2024 | Almaty
01.07.2024 - 04.07.2024 | Nürnberg
11.07.2024 - 13.07.2024 | Kuala Lumpur
11.06.2024
11.06.2024
12.06.2024
14.06.2024
18.06.2024
Online webinar: Doing business in Poland - forms and specifics of doing business
10.06.2024
12.06.2024
12.06.2024
Information systems and software solutions in logistics
13.06.2024
24.06.2024
Job offers
-
12.06.2024
Project engineer with English or German language - Branson Ultrasonics, a.s.
11.06.2024
Sales representative for the Czech Republic - GRAFE Polymer Solutions GmbH
10.06.2024
Warehouse worker - ENVI-RECYCLING PLAST, s. r. o.
10.06.2024
Commercial/technical representative of professional tools (all Slovakia) - ant s.r.o.
05.06.2024
Commercial/technical representative of professional tools (all Slovakia) - ant s.r.o.
05.06.2024
-
03.06.2024
Production operator - inspection of plastic products - ESOX-PLAST s.r.o.
03.06.2024
Warehouse worker - ENVI-RECYCLING PLAST, s. r. o.
03.06.2024