Plastics and Rubber products - Current News Articles
Articles on Plastics and Rubber products. Daily updated information and news from the plastics industry.
-
Six reasons, why to invest in new plastic windows
- 09.01.2023
- Plastics and Rubber products
- Plastic products
The current energy crisis forces many to think more about the possibilities of savings in the home. The demand for energy-saving sources, such as heat pumps or photovoltaics, is still growing. However, interest is also growing in heat-insulating windows, because up to 50% of the heat can escape...
-
What are the advantages of plastics?
- 09.12.2022
- Plastics and Rubber products
- Plastic products
We have prepared several examples of the use of plastics for you. They show that modern materials, including plastics, can help us save energy and ensure sustainable...
-
Plastic windows and doors are high quality and elegant
- 02.12.2022
- Plastics and Rubber products
- Plastic products
The time when customers chose plastic windows just because they were the cheapest is over. They choose today's plastic windows mainly because of their excellent properties, led by long service life, excellent thermal insulation parameters and elegant...
-
Up to half of the heat escapes through the old windows!
- 15.11.2022
- Plastics and Rubber products
- Plastic products
The heating season can easily last 9 months in the coldest regions of Slovakia, and energy prices are still rising, so more and more people are looking for ways to save on heating expenses. If you live in an apartment or house that is equipped with older windows, you can start right...
-
Large-format windows can safely carry a high-quality class A window profile
- 02.11.2022
- Plastics and Rubber products
- Plastic products
The share of glazed areas in family houses is growing from year to year. This is not surprising, as large areas look stylish, provide daylighting of the house and their benefit is a great...
-
VEKA FSP WinDoPlan – the perfect tool for designing windows and doors
- 26.08.2022
- Plastics and Rubber products
- Plastic products
Spoločnosť VEKA, výrobca plastových okenných a dverových profilov najvyššej triedy A, vytvorila pre svojich partnerov profesionálny online nástroj pre podrobný návrh okien a dverí, vrátane všetkých certifikátov a tvorby dokumentácie pre obchodné ponuky a výberové...
-
TITAN - Tatraplast: Hollow polycarbonate sheet Akyver reduces thermal radiation by up to 65%
- 10.08.2022
- Plastics and Rubber products
- Plastic products
The new treatment of the HEATSTOP Silver top layer will limit the penetration of solar energy into the shaded area. This will result in a significant reduction in the heating of closed spaces and the temperature of shielded materials in the open...
-
The heat also "attacks" through the windows. Do you know how to protect your home from the sun?
- 20.07.2022
- Plastics and Rubber products
- Plastic products
A home bathed in sunlight is the wish of each of us, but this joy also has its dark side. The direct summer sun very often causes excessive heating of the room and it also creates unpleasant glare when working from home. How to effectively defend yourself against high summer temperatures and...
-
Polycarbonate EZ Glaze from TITAN-Tatraplast s.r.o. suitable for sheds or pergolas
- 13.07.2022
- Plastics and Rubber products
- Plastic products
Full Polycarbonate EZ-Glaze 60 is a polycarbonate sheet with UV stabilization, specially developed for simple and quick roofing of sheds, pergolas, car...
-
Should we invest for window profiles in class A?
- 28.06.2022
- Plastics and Rubber products
- Plastic products
Spring also brings with it a lively construction industry in the form of the start of new constructions and also reconstructions. Replacing and installing windows is one of the most common construction tasks. However, it does not matter which window you choose. With plastic windows, you will come...
-
Curtains and tarpaulins (not only) for welding boxes from Portaflex s.r.o.
- 22.06.2022
- Plastics and Rubber products
- Plastic products
The products represent a barrier against harmful radiation, are a quick solution for the separation of welding and grinding workplaces and are suitable for delimiting work surfaces. These screens protect not only the worker but also other people around the workplace. At the same time, they help the...
-
A wide range of quality plastic tanks from REMONTplast
- 30.05.2022
- Plastics and Rubber products
- Plastic products
REMONTplast has been on the market for 18 years. REMONTplast manufactures, sells and installs high-quality self-supporting plastic tanks, such as cesspools, water collection tanks and water meter...
-
Uniplast MH invests in ecological energy sources
Uniplast MH s.r.o. works with plasticinjection molding, construction and production of new molds. They supply products for white goods, transport technology, the automotive industry, the electrical engineering industry and construction. Our editorial staff terminated the executive director of...
-
Modular system of raised flower beds made of recycled plastic from ESOX, spol. s.r.o.
ESOX, spol. s.r.o., a manufacturer of high-quality plastic products and injection molds, presents its new product Laanik. Thanks to the Laanik modular system, you can assemble a decorative raised flower bed, vegetable garden or sandpit for...
-
Letting the engine breathe properly - LANXESS
Polybutylene-terephthalate (PBT)-based compounds that offer not only high hydrolysis stability in hot and humid conditions but also good laser transparency for laser transmission welding are a...
-
NonOilen: Fully decomposable 3D printer filament from Fillamentum Manufacturing Czech s.r.o.
The Czech manufacturer of filaments for 3D printers produces its first 100% biodegradable material, NonOilen. Once an item is printed with NonOilen at the end of its life cycle, it does not have to be thrown in the trash. All you have to do is send it back to Fillamentum for recycling, or break it...
-
A unique, growing and folding Sharvan bicycle from the workshop of 1. prešovská nástrojáreň, s.r.o. and LPH a.s.
Mercedes-Benz, BMW, Audi, Rolls-Royce, Bentley. All these leading world car manufacturers are united by trust in the products of our Slovak company LPH. We have been producing top plastic and metal components for them in the east of Slovakia for more than thirty years (not only). In 2017, however,...
-
When it is not raining or dripping - water tanks from the company Sady s.r.o.
- 14.02.2022
- Plastics and Rubber products
- Plastic products
Príroda sa s nami každodenne delí o svoje bohatstvá. V pôde pestujeme plodiny, ktoré sú potravou nielen pre ľudstvo, ale aj pre ostatné živočíchy. Človek bez vody neprežije viac, ako tri dni. Globálne otepľovanie každoročne spôsobuje deficit a úbytok vodných plôch po celom svete. Dážď je preto...
-
Is the noise from the street obstructing you? Maybe it's time to replace the windows!
- 11.02.2022
- Plastics and Rubber products
- Plastic products
One of the most important features of windows, which is often forgotten, is their ability to insulate noise. If you have a house surrounded by a garden, far from any road or railway, you do not have to deal with noise problems. However, if you live in dense urban development, pay...
-
Convert your single-use wooden pallets to durable high-performance plastic!
- 24.01.2022
- Plastics and Rubber products
- Plastic products
It’s never been more important for the commercial supply chain to up its game in terms of sustainability, transparency and performance – which makes it an ideal time to explore the advantages of durable plastic transit...
-
Plastic windows can be replaced even in winter, but plan well!
- 31.12.2021
- Plastics and Rubber products
- Plastic products
The coldest part of the year is ahead of us and if you have old windows at home, pay attention! After all, up to 50% of the heat can escape through old windows, which can, especially now, with skyrocketing energy prices, cost you dearly. If you find that your windows no longer seal properly, be...
-
Renowned manufacturer of plastic parts PLASTIKA a.s. joined forces with technology supplier Kovofiniš a.s.
The company PLASTIKA a.s. has been one of the reliable partners of customers for years who need to increase the added value of plastic parts by special surface treatment. These are the technologies of painting, printing, hot stamping and, most recently, galvanic plating, which imitates the metallic...
-
Unique plastic sports bottles made of durable TRITAN copolyester
Tritan materials belong to the group of copolyesters. This copolyester offers an innovative design and the possibility of use in applications where the emphasis is on high transparency, toughness, temperature and chemical...
-
Unsecured plastic windows can withstand thieves in just a few seconds! So how to choose safe windows?
- 24.11.2021
- Plastics and Rubber products
- Plastic products
Windows belong to the most critical parts of a house or apartment not only from a construction point of view, but also from a safety point of view. If they are easily accessible on the ground floor or otherwise, they are usually the first place through which thieves try to get inside. Windows with...
-
Home – compostable coffee capsules in brilliant colours: here the eye and also the awareness of nature and the environment drink along
Opinions are divided on coffee capsules. Some love the portioned enjoyment with its variety of aromas and flavours, others consider the small containers of palate pleasers to be cumbersome and overpriced. But studies show that the market for coffee on demand is growing almost...
-
A revolution among decorative finishing materials - Rocko Tiles Wall System
Waterproof, large-format wall panels (4x1230x2800mm) Rocko Tiles are a real revolution between finishing and decorative materials. Large-format wall cladding in exclusive decors (up to 23 decors), which perfectly imitate wood, concrete or marble, can be used from the living room, kitchen or...
-
The chip crisis is also affecting the Czech automotive industry
The deepening chip crisis is significantly affecting the performance of the automotive industry in the Czech Republic. So far during the year, 831,653 passenger cars were produced, ie. Only 2.9% more than last year's "covid" year. However, since August, production has been significantly affected by...
-
Ensinger: Polymer expertise in the fight against COVID-19
More than 180 million people have been infected with the coronavirus SARS-CoV-2, which has mutated several times. Effective vaccines have been developed in record time, but billions of doses of vaccines are needed to overcome the pandemic. Among other things, sensor components are urgently needed...
-
Continental enables use of recycled PET Bottles in tire production as of 2022
Continental enables the use of reprocessed polyester obtained from recycled plastic bottles in its tire production as of 2022. The new sustainable polyester yarn will be obtained from polyethylene terephthalate (PET) bottles by a mechanical process and will be used in the construction of the tire...
-
Three types of plastic screen beams from Portaflex s.r.o.
- 23.08.2021
- Plastics and Rubber products
- Plastic products
Transparent lamella blinds (referred to as industrial blinds, thermal blinds or simply "Portaflex" by some customers) are in most cases used as draft devices in gates, doors, passages or as a barrier for entire halls. In places of high frequency of movement of people or technology, they prevent...
Latest Classifieds
-
31.10.2022 | ID: 202216215
Top Advert To purchase: Company - plastic injection
21.03.2023 | ID: 202316727
For Sale: Injection molding (Engel, Krauss Maffei) - 1000-2300 tons
21.03.2023 | ID: 202316726
For Sale: PA 66 - Lubricomp RX85514 NC
21.03.2023 | ID: 202316725
To purchase: PMMA, POM, PC plastic waste
21.03.2023 | ID: 202316724
-
20.03.2023 | ID: 202316720
For Sale: PP-COPO white regranulate
20.03.2023 | ID: 202316719
To purchase: Company - plastic injection
21.03.2023 | ID: 202316727
To purchase: PMMA, POM, PC plastic waste
21.03.2023 | ID: 202316724
-
20.03.2023 | ID: 202316720
To purchase: Regrind - ABS, PC/ABS, PC, PA - Filled und Unfilled
20.03.2023 | ID: 202316718
To purchase: PE films - /municipal
20.03.2023 | ID: 202316711
To purchase: ASA , ABS , PC/ABS
15.03.2023 | ID: 202316694
To purchase: PC GF , PC FR , PC Al
15.03.2023 | ID: 202316693
-
31.10.2022 | ID: 202216215
Top Advert For Sale: Injection molding (Engel, Krauss Maffei) - 1000-2300 tons
21.03.2023 | ID: 202316726
For Sale: PA 66 - Lubricomp RX85514 NC
21.03.2023 | ID: 202316725
For Sale: PP-COPO white regranulate
20.03.2023 | ID: 202316719
For Sale: PET flakes color mix
20.03.2023 | ID: 202316716
For Sale: Color Masterbatches, 100t
20.03.2023 | ID: 202316715
For Sale: Moisture absorber (Desiccant) 100 t every month
20.03.2023 | ID: 202316714
Upcoming Events
22.03.2023 - 23.03.2023 | Paríž
22.03.2023 - 25.03.2023 | Bratislava
27.03.2023 - 31.03.2023 | Sao Paulo
28.03.2023 - 30.03.2023 | Nuremberg
28.03.2023 - 30.03.2023 | Lagos
29.03.2023 - 31.03.2023 | Guadalajara
29.03.2023 - 31.03.2023 | Bologna
29.03.2023 - 30.03.2023 | Dortmund
29.03.2023 - 30.03.2023 | Dortmund
21.03.2023
21.03.2023
21.03.2023
22.03.2023
22.03.2023
20.03.2023
Forum of practical maintenance
21.03.2023
23.03.2023
Electrical injection molding with FANUC ROBOSHOT
23.03.2023
Injection molding technology I.
28.03.2023
Job offers
Chemical production operator - SLOVNAFT, a.s.
20.03.2023
Turner+CNC/toolmaker 1-shift operation COURBIS Smart Polymers s.r.o
17.03.2023
Automation dealer (Morava region) - ENGEL CZ s.r.o.
14.03.2023
Dealer of injection molding machines - ENGEL CZ s.r.o.
14.03.2023
Service technician - ENGEL CZ s.r.o.
14.03.2023
Quality manager - ESOX-PLAST s.r.o.
09.03.2023
Plastic injection technologist - AIS Automotive Interior Systems Slovakia s.r.o.
09.03.2023
Operator, manipulator - J.P. PLAST Slovakia spol. s r.o.
07.03.2023
Storekeeper - EXPLAST Slovensko, s.r.o.
02.03.2023
Branch Dictionary
