Latest Classifieds

Cooperation : Rental of production and storage space near Brno

• 11.07.2021
• ID: 202114291

For long-term lease, we offer a production and storage hall in the cadastral area of Mìnín, the hall is located in the premises of the Mìnín Industrial Park, Mìnín 440, 664 57 Mìnín.
Area of the production hall, approved for waste management (except for hazardous - 12,600 tons / year): 2,100 m2 + the possibility of a cloakroom approx. 20 m2 + offices approx. 40 m2 - possibility of renting outdoor storage space.
The hall in question is accessible to trucks from both sides.
The possibility of renting additional storage halls, both for the receipt of raw materials and for the storage of finished products.
Possibility to rent or possibly sale of other real estate.
Electricity - own transformer stations with an input of up to 2 MW.
Water - public water supply or own utility water.
Security service - concierge - 24 hours a day.
The whole area is more than 500 m from the built-up area.
Accessibility of the D2 motorway - 5 km

Contact: Petr Novotný - novotny@finbau.cz TEL: +420733 733 166 FINBAU a.s., Mìnín 440, 664 57 Mìnín

• Petr Novotný - E-Mail: Novotny@finbau.cz / 733733166

Cooperation : Crushing of plastic products

• 01.07.2021
• ID: 202114213

We crush plastic products (eg crates, inlets, etc.) into 8 and 6 mm grit.

• Petra Bukovjanová - E-Mail: plastybruntal@seznam.cz / +420774447878

Cooperation : Free production Capacity - Spark eroding

• 09.06.2021
• ID: 202114129

1. CUT 300 Sp /wire cutter/
- achieves high cutting speeds and performance
- is able to cut tapers under the angle of 45° regardless the piece height
- convenient for making hollows, holes, etc.
Technical Parameters:
travel in X, Y and Z axes: 550 x 350 x 400 mm
maximum piece dimensions: 1,200 x 700 x 400 mm
maximum piece mass: 1,500 kg
achievable surface roughness: Ra 0.1 µm

2. CUT 200 Sp /wire cutter/
Technical Parameters:
travel in X, Y and Z (*) axes: 350 x 220 x 220 mm
U, V (**) travel: 350 x 220 mm maximum
piece dimensions (*): 1,000 x 550 x 220 mm
maximum piece mass: 750 kg
quick travel (X, Y and U, V axes): 3 m/min
integrated collision protection (ICP): on 5 axes
maximum taper: ± 45/220 (standard being ± 30/220) °/mm
achievable surface roughness: Ra 0.1 µm
* width x depth x height / ** width x depth

3. Form 30 /die-sinking electrical discharge machine/
- is the most compact universal electrical discharge machinein the standard level segment.
Technical Parameters:
maximum piece dimensions: 1,000 x 700 x 400 mm
travel range (X-Y-Z): 600 x 400 x 400 mm
maximum piece mass: 1,000 kg
measuring accuracy: 0.1 µm

4. DRILL 20 /hole drilling machine/
- drills holes with electrodes ranging from 0.1 to 3 mm in diameter
- drill small holes into assembly frames
- drills holes into high-speed extrusion molds, etc.
Technical Parameters:
travel in X, Y and Z axes: 300 x 200 x 300 mm
piece size: 700 x 450 x 200 mm
maximum piece mass: 300 kg
maximum drilling depth: 200 mm

• Lukas Simor - E-Mail: simor@letech.sk / +421 949 774 114

Cooperation : Repair of plastic boxes

• 08.06.2021
• ID: 202114126

Our company deals with the repair of plastic components. We perform repais by welding, gluing with volcanic tape and reiforcement of soft parts.

• PP RENEWAL s.r.o. - E-Mail: pprenewal@seznam.cz / +420722601234

Cooperation : Plastics recycling service

• 20.05.2021
• ID: 202114018

We offer free capacity of the regranulation line for LDPE, HDPE, PP and EVAC materials. The materials can be in the form of bales, crumbs, moldings, cakes, overflows, coils, etc. Possibility of homogenization in silos of 5 ton batches. Possibility of inspection of production and storage facilities. More details: Lukáš Volný GSM: +420 725 906 717 Email: lukas.volny@fatra.cz

• Hana Krahulová - E-Mail: hana.krahulova@fatra.cz / +420577502487

Cooperation : Representation of the seller of injection molding machines in the EU

• 19.05.2021
• ID: 202114012

We represent , Gold Coin brand injection moulding machines and looking for representative in European market. www.polymechplast.com

• Pankaj Patel Patel - E-Mail: pmlmum_euro@polymechplast.com / 00491735844040

Cooperation : Crushing plastic

• 18.05.2021
• ID: 202114011

We offer processing of your: moldings, scraps, inlets, etc. to regranulate More information by phone. Ideally long-term cooperation

• Josef Petøek - E-Mail: petrek.josef1@gmail.com / 733747364

Cooperation : Free capacity on injection machines

• 18.05.2021
• ID: 202113960

Plastika, a.s. company based in Nitra offers free production capacities on injection molding machines in categories 1,300kN - 13,000kN closing force. ISO9001 + IATF16949.

• Michal Vokolek - E-Mail: vokolek@plastika.sk / +421918704967

Cooperation : Free testing capacity

• 17.05.2021
• ID: 202113958

We offer free testing capacity on the Xenotest Alfa + device (artificial accelerated aging testing) according to the following standards:
STN EN ISO 4892-2
PV 1303
PV 3929
PV 3930
VDA 75202: 2001
STN EN ISO 105-B06
STN EN 20105-A02
STN EN ISO 105-A05
Information: J.Koutný, e-mail: koutny@testpolymer.cz

Cooperation : Plastic coating of small metal parts

• 12.05.2021
• ID: 202113914

I offer free capacities for plastic coating of small parts up to 100 mm with modified PE plastic.

• Andrej Bogáò - E-Mail: andrej.bogan.abl@gmail.com / 0948178794

Cooperation : Vo¾ne kapacity na vstrekolis

• 25.04.2021
• ID: 202113795

Som nováèik v oblasti odlievania plastov mám jeden lis Tederick 210 i uzatváracia sila 80t mám vo¾ne kapacity. Cca dva týždne v mesiaci h¾adám nieèo jednoduché a rovnaké najlepšie èierny polypropylén

• Anton Handzuš - E-Mail: tono.handz@gmail.com / 0908973464

Cooperation : Free capacities for injection of 2K parts

• 19.04.2021
• ID: 202113775

We are looking for a manufacturer who has free capacity for 2K injection molding machines to produce 2K Automotive Parts.

• Jaroslav Pták - E-Mail: ptak@inotech.cz / 725434397

Cooperation : Prototype and series injection moulds

• 19.04.2021
• ID: 202113767

We offer the production of injection molds or prototype injection molds. We have long-term cooperation with a partner tool shop in China. We focus primarily on the production of prototype molds from aluminum and steel alloys. For each project we offer complete services: part manufacturability studies, Moldflow, 3D mold design, mold production, sampling, QA part validation and the actual production of parts with delivery to your address.

• Lukáš Hartman - E-Mail: hartman.lukas@polyvisioncz.cz / +420777842780

Cooperation : Free capacities on injection molding machines

• 15.04.2021
• ID: 202113754

We offer free production capacity on Engel molding machines 22t - 150t. Small test series, also long-term cooperation. We offer many years experience, reliability, quality and a clean area. For more info call: +420 777 317 730

• Lucie Kolomazníèková - E-Mail: info@polyfactory.cz / 777317730

Cooperation : Free capacity for injection molding

• 14.04.2021
• ID: 202113745

We offer free production capacity on Arburg 70, 80 and 200t moldiing machine. We are ISO 9001 certified. We provide molding, construction and production of molds, design modifications of the project and the necessary documentation for the customer. We own a universal frame for the implementation of smaller series. For an offer, write to king.honza@seznam.cz or pavel@berantuning.cz or call J.Král - 732 175 918

• Jan Král - E-Mail: king.honza@seznam.cz / 732175918

Cooperation : Are you looking for free production capacities?

• 06.04.2021
• ID: 202113679

Cooperation offer - are you looking for free production capacities?
Vacuum forming of thermoplastics:
- GEISS T8 frame dimensions 2000x1500 / 1000 x 1000 mm
- GEISS T9 frame dimensions 2500 X1500 / 1500 x 1000 mm
- CMS Br5 frame dimensions 1500 x1200 / 700 x 600 mm
Contact:
Ing. Janošík Martin E-Mail: martin.janosik@form-composite.com  Mobile: +420 605 272 467
Machù Michaela E-Mail: michaela.machu@form-composite.com Mobile: +420 731 104 601

Welding:
Welding parts of common steels, stainless and non-ferrous metals. All on the basis of valid certificates and qualifications:
DIN EN 15085 - 2,
CL2, ISO 3834 - 2,
ÈD V95 / 5 v.2
Welding in a protective atmosphere by MIG, MAG, TIG, CO2 methods, spot welding, stud welding.

Water jet cutting:
This technology allows the cutting of any shape from virtually any material (sandwich profiles, metal materials, plastics, stone, etc.). This is a cold cut where the surface is not thermally stressed. We can divide materials up to a thickness of 200 mm, the dimensions of the table are 3500 x 2000 mm. CNC trimming and surface machining (production of prototype molds and trimming jigs from easily machinable materials - cartit, MDF, foam ...).
The maximum dimensions of the machining space are 2000 x 3000 x 1200 mm.
Contact:
Ing. Výskalová Zuzana E-Mail: zuzana.vyskalova@form-composite.com Mobile: +420 731 613 384
Švach Jiøí E-Mail: jiri.svach@form-composite.com  Mobile: +420 737 286 907

We process composites:
- vacuum pressing of composites
- fiberglass by contact method including aramid reinforcement
- phenolic and epoxy Prepreg technologies according to EN 45545
- painting in own paint shop
- industrial gluing according to DIN 6701-2: 2015. Class of glued joints A2.
- production of a6 mold models
Contact:
Ing. Tvarùžek Zdenìk E-Mail:  zdenek.tvaruzek@form-composite.com  Mobile: +420 733 361 869
Garguláková Magdaléna E-Mail: magda.gargulakova@form-composite.com Mobile: +420 733 360 083

In case of your interest will be discussed in person. More information can be found here: https://www.plasticportal.cz/cs/podla-cinnosti/form-sro/f/417/ / or here: https://www.form-composite.com/

• Aleš Vaculèík - E-Mail: ales.vaculcik@form-composite.com / +420 734 259 686

Cooperation : Production of plastic covers for lighting fixtures

• 16.03.2021
• ID: 202113559

We are looking for the production of vacuum-formed covers for LED ceiling lights. We offer permanent cooperation. More information at info@vmelektro.cz +420737480293

• Pavel Minaøík - E-Mail: info@vmelektro.cz / 00420 604247127

Cooperation : Rental of production and storage space near Brno

• 16.03.2021
• ID: 202113558

For long-term lease, we offer a production and storage hall in the cadastral area of Mìnín, the hall is located in the area of Prùmyslový Park Mìnín, Mìnín 440, 664 57 Mìnín.
- area of the production hall approved for waste management (except for hazardous - 12600 tons / year): 2100 m2 + the possibility of a cloakroom approx. 20 m2 + offices approx. 40 m2 - possibility of renting outdoor storage space
- the hall in question is accessible for trucks on both sides
- the possibility of renting additional storage halls, both for the receipt of input raw materials and for warehouses of finished products
- possibility of renting or possibly sale of other real estate
- electricity - own transformer station with an input of up to 1.5 MW
- water - public water supply or own utility water
- security service - concierge - 24 hours a day
- the whole area is more than 500 m from the built-up area
- Access to the D2 motorway - 5 km

contact:
Petr Novotný, novotny@finbau.cz (please include finbau@finbau.cz in the copy)
TEL: 733 733 166
FINBAU a.s. , Mìnín 440, 664 57 Mìnín

• Petr Novotný - E-Mail: Novotny@finbau.cz / 733733166

Cooperation : Oils, lubricants, maintenance sprays

• 15.03.2021
• ID: 202113533

We offer cooperation in the field of supply and service of oils, plastic lubricants and sprays for maintenance (lubricating, cleaning, preserving ...).

• STAP TN - E-Mail: obchod@stap-tn.sk / 0917 199 093

Cooperation : Plastics recycling service

• 03.03.2021
• ID: 202113468

We offer free capacity of the regranulation line for LDPE, HDPE, PP and EVAC materials. The materials can be in the form of bales, crumbs, moldings, cakes, overflows, coils, etc. Possibility of homogenization in silos of 5 ton batches. Possibility of inspection of production and storage facilities. More details: Lukáš Volný GSM: +420 725 906 717 Email: lukas.volny@fatra.cz

• Hana Krahulová - E-Mail: hana.krahulova@fatra.cz / +420577502487

Cooperation : Plastics recycling service

• 10.02.2021
• ID: 202113326

We offer free capacity of the regranulation line for LDPE, HDPE, PP and EVAC materials. The materials can be in the form of bales, crumbs, moldings, cakes, overflows, coils, etc. Possibility of homogenization in silos of 5 ton batches. Possibility of inspection of production and storage facilities. More details: Lukáš Volný GSM: +420 725 906 717 Email: lukas.volny@fatra.cz

• Hana Krahulová - E-Mail: hana.krahulova@fatra.cz / +420577502487

Cooperation : Free moulding capacities and assembly in a dust-free environment

• 28.01.2021
• ID: 202113213

We offer free capacities on Arburg injection molding machines of the following sizes: 40T, 100T, 125T, 150T, 220T 320T. We also offer the possibility of using production space for cooperation in a dust-free environment with a size of 350 square meters. Original use - assembly of spray pumps for the cosmetic industry.

• Rostislav Skoták - E-Mail: skotak@innovaplast.cz / 774175689

Cooperation : Assembly, packaging, sorting

• 26.01.2021
• ID: 202113201

I would very much like to offer you opportunities to cooperate with our sheltered workshop.
Our free capacities:
- these are small assemblies
- packaging or repackaging of products
- sorting and treatment of material
- possibly also other manual work

• Lukáš Kratochvíl - E-Mail: aldilnacz@gmail.com / 605530178

Cooperation : Looking for distributors in Eastern Europe

• 25.01.2021
• ID: 202113190

R&P POLYPLASTIC is the largest producer of thermoplastic compounds in Russia. The company is interested in developing export sales and is searching for distributors in Eastern Europe.

• Vladimir Belousov - E-Mail: vladimir.belousov@polyplastic.ru / +74957456857

Cooperation : Plastics recycling service

• 04.01.2021
• ID: 202112969

We offer free capacity of the regranulation line for LDPE, HDPE, PP and EVAC materials. The materials can be in the form of bales, crumbs, moldings, cakes, overflows, coils, etc. Possibility of homogenization in silos of 5 ton batches. Possibility of inspection of production and storage facilities. More details: Lukáš Volný Tel .: +420 577 503 449 GSM: +420 725 906 717 Email: lukas.volny@fatra.cz

• Hana Krahulová - E-Mail: hana.krahulova@fatra.cz / +420577502487

Cooperation : Crushing plastic moldings

• 27.11.2020
• ID: 202012839

We offer cooperation for companies, according to the free production capacity, processing of material into crumbs with a grain size of 10 mm, suitable for further processing. We can handle any size and degree of processing. 

• Pavla Kvapilová - E-Mail: eco.ecocycle@gmail.com / +420 608 074 363

Cooperation : Looking for distributors in Czech Republic and Slovakia

• 19.11.2020
• ID: 202012792

R&P POLYPLASTIC is the largest producer of thermoplastic compounds in Russia and the CIS countries. Currently we are developing our export sales and looking for distributors in Czech Republic and Slovakia. Exclusive distribution is possible.

• Vladimir Belousov - E-Mail: vladimir.belousov@polyplastic.ru / +74957456857

Cooperation : Pet blowing machine

• 30.10.2020
• ID: 202012669

PET blow molding machines with a volume of 0.2 - 12 l
Average output from: 1000 - 9000
Types of plastics: PET, PLA, RPET.
We are looking for potential distributors or partners.

• Zoltán Marczell - E-Mail: pet.packaging.ltd@gmail.com / +421908368711

Cooperation : We are looking for a manufacturer of plastic parts from the Czech Republic

• 27.10.2020
• ID: 202012649

We are looking for a manufacturer of plastic parts from the Czech Republic with free capacity for 2021 and beyond. These are automotive parts. ISO 9001 certification. If you are interested, please send basic information about your company to e-mail: ptak@inotech.cz
Inotech ÈR spol. s r.o.

• Jaroslav Pták - E-Mail: ptak@inotech.cz / 725434397

Cooperation : Looking for a customer

• 26.10.2020
• ID: 202012638

We would like to establish cooperation with new end partners / processors:
PET - spacers, preforms, pet bottles (pressed)
HDPE - canisters, drugstores (pressed)
PP EPDM - bumpers (pressed)
foils - from sorting lines (pressed)

• Nikola Handlová - E-Mail: nikola.handlova@jmk-recycling.cz / +420720975589