Injection molding - Current News Articles
Articles on Injection molding. Daily updated information and news from the plastics industry.
Invitation to the webinar of SMARTPLAST s.r.o. - Influence of residual stress on deformations and part quality
- 18.11.2021
- Latest News
- Injection molding
- Webinar
Residual stresses are mechanical residual stresses that arise in the injection molded part during production. They remain built into the spray even after being ejected from the mold cavity and throughout the life...
-
Home – compostable coffee capsules in brilliant colours: here the eye and also the awareness of nature and the environment drink along
Opinions are divided on coffee capsules. Some love the portioned enjoyment with its variety of aromas and flavours, others consider the small containers of palate pleasers to be cumbersome and overpriced. But studies show that the market for coffee on demand is growing almost...
-
ENGEL: What are the challenges facing the plastics industry in 2021?
- 26.10.2021
- Machinery & Equipment
- Business economics
- FAKUMA
- Injection molding machines
- Injection molding
After a long break, ENGEL presented itself at FAKUMA 2021. "The markets are recovering faster than expected," says Dr. Chris-toph Steger, CSO of the ENGEL Group. "The demand is huge, and the plastics industry is tak-ing a very dynamic approach to tackling the challenges of digitalisation, cli-mate...
MANUTHIERS would like to invite you to the MSV Brno 2021
MANUTHIERS specializes in the injection molding of plastic parts and the production of injection molds. We manufacture parts for all industries, including industry, electronics, paramedical, or...
Attend a free webinar: Conflict between part design and mold, how to further optimize cooling
The cost of plastic and cooling time can be more than 70% of the cost of manufacturing a part. In the last webinar No. 8, we described how the cooling time affects the wall thickness of the part, the type of plastic and fillers, the mold material and the identification of places with difficult heat...
Invitation to the webinar on injection cooling - SMARTPLAST s.r.o.
- 30.09.2021
- Latest News
- Injection molding
- Webinar
The cost of plastic and cooling time can be more than 70% of the cost of manufacturing a part. The cooling time is the longest part of the injection cycle. It depends mainly on the design of the part, the set injection parameters and the cooling...
-
How the company Som-Plast Kft. and Som-Szer have become leading suppliers of automotive parts
Despite the setbacks caused by the pandemic, Hungarian firms Som-Szer and Som-Plast Kft. continue to invest in new projects, utilizing their 25 years of experience in plastic and metal manufacturing and...
Quality and complexity in plastic injection - InnovaPlast s.r.o.
- 17.08.2021
- Latest News
- Injection molding
Plastic injection is the most widespread technology for the production of plastic parts for the automotive, engineering, medical, food, electrical and consumer industries. InnovaPlast s.r.o. at present it can produce moldings from all types of thermoplastic materials from 0.5 g up to 1407...
-
New representation of Sumitomo (SHI) Demag on the Czech and Slovak market
In April 2021, Sumitomo (SHI) Demag began operating a subsidiary in the Czech and Slovak markets, focusing on the sale and service of plastic injection...
-
Cooperation of disinfection manufacturer Hagleitner with Mold-Masters during the Covid-19 pandemic
Founded in 1971, Hagleitner Hygiene International GmbH has specialized in innovative hygiene solutions. Their product assortment ranges from soap and disinfectant dispensers to dosing system for washing and rinsing systems through to highly effective cleaning...
-
Company ARBURG extend the life of plastics
A circular economy only works if all players in the process chain work together – from the material and injection moulding machine manufacturers to the recycler. ARBURG first showed how this could be done at K...
-
ENGEL performance.boost: Unlock the full potential
- 17.05.2021
- Services
- Industry 4.0
- Injection molding
Whether it's cycle time, energy consumption or process stability: the adjusting screws take many forms for higher efficiency and injection quality. Two paths lead to the full realization of the potential: deep knowledge of the injection molding machine and rich technological...
-
Simulation technology not only for the plastics industry
- 03.05.2021
- Services
- CAD/CAM
- Injection simulation
- Software for industry
- Cost savings
- Injection molding
- Research
Simulations and computer technology in general using computer resources have been helping to save money in the development of new products for a long time, practically more than half a century. Recently, however, from the originally only verification phase of product design, simulations have been...
Attend the Plastic Injection webinar from IMCD Czech Republic s.r.o.
- 30.04.2021
- Latest News
- Injection molding
- Webinar
IMCD Czech Republic s.r.o. invites you to a webinar, which continues the long tradition of seminars organized by this company. It will take place on 27.5.2021 from 1...
-
Linaset a.s: New production capacity for plastic injection
Linaset Company offers top production capacity in one of the most modern plastic injection services in Czech Republic. The new production hall was put into operation in 2018 and expanded the existing production capacities of the Bruntál...
-
FORMAT, s.r.o. increases production capacity and focuses on the production of plastic products for the electrical and construction industries
Traditional manufacturer of injection molds for the processing of thermoplastics and thermosets, the company Format, s.r.o. from Bystřice pod Hostýnem, survives a turning point. All of this is due to the restructuring of the entire company, which began two years ago and has affected all areas of...
-
From design to product. Complete service in the field of plastic injection from MANUTHIERS
MANUTHIERS specializes in the injection molding of plastic parts and the production of injection molds. The company has extensive experience in the field of plastic injection in all possible industries, including industry, electronics, paramedical, or...
-
Production technologies of DGS plast s.r.o.
- 15.02.2021
- Services
- Injection molding
- Blow molding
DGS plast s.r.o. has several production technologies such as injection, co-extrusion, extrusion blow molding, preform blow molding. The company's production focus consists of the production of plastic packaging, tool shop and mold...
Precise plastic injection will be guaranteed by the company IMS-Drašnar s.r.o.
Plastics press of the company IMS-Drašnar s.r.o. operates in a continuous production process 24 hours a day. All construction plastics except PVC are...
-
Plastic moldings by plastic injection technology from the company Plastoma výrobní družstvo
The company Plastoma výrobní družstvo is a custom manufacturer of plastic parts, production is carried out on twelve injection molding machines. To complement customer service, it also performs assembly work and ultrasonic welding of plastic...
Introplast a.s. Senica offers free production capacities on the KraussMaffei KM 2700-12000MX press
- 07.01.2021
- Latest News
- Injection molding
Introplast a.s. Senica, was established in 2004 and its main activity is the production of plastic products for the automotive industry and for other...
Plastoma výrobní družstvo produces plastic parts to order
- 28.12.2020
- Latest News
- Injection molding
The company is a custom manufacturer of plastic parts, production is carried out on twelve injection molding...
-
Dormer Pramet will virtually present a complete tool portfolio for the production of molds and dies
- 11.11.2020
- Plastics Moulds
- Injection molds
- Injection molding
At the virtual exhibition Production of Molds 2020, which will take place from 24 November to 26 November 2020, the key exhibitors will undoubtedly include Dormer Pramet - a renowned manufacturer of machine tools. In its stand, it will present its entire current range of milling cutters with...
-
ENGEL presents next generation all-electric e-mac injection moulding machines
In October 2020, ENGEL is presenting the next generation of its all-electric e-mac injection moulding machine series in a challenging application for the manufacture of pipette tips. Offering maximum flexibility for individual customer requirements, the e-mac is now even more...
-
Plastic products for medicine and lighting technology from T&F Plast s. r. o.
- 24.08.2020
- Plastics and Rubber products
- Extrusion
- Plastic products
- Service of machines
- Forming of plastics
- Injection molding
- Blow molding
T&F Plast s.r.o. offers customers the production of plastic products in the field of electrical plastics, lighting technology and medical production. The company has 22 years of experience in the field of plastic production - plastic injection, plastic extrusion (pressure extrusion), molding and...
-
Development, production and construction of plastic parts, tools and molds from Plastimax Tech s.r.o.
Plastimax Tech s.r.o. Develops, manufactures and assembles plastic components. Our experienced specialists design high-quality individual products for you with the help of state-of-the-art CAD programs. We provide a complete service in the field of tool management from development and construction...
An invitation to education called The Injection Process
- 22.05.2020
- Latest News
- Events
- Injection molding
- Webinar
The Banska Bystrica Regional Chamber of the Slovak Chamber of Commerce and Industry offers training for workers in the field of construction and production of molds for plastic injection focused on the injection...
-
Respiratory masks from the Czech Republic can put factories back into operation and save the film industry
- 11.05.2020
- Services
- Injection molding
- Research
Jan Svoboda senior founded his company in the mid-1990s. He has been trading for a quarter of a century with semi-finished products for tools used for pressing plastics and light metals. During that time, he probably never got into the situation in which he is now together with his son Jan Svoboda...
-
Arburg helps in the manufacture of medical equipment
These days, nothing is the same as it was a few weeks ago. And yet the Corona crisis has made one thing very clear: companies in Germany and Europe are showing solidarity to help...
-
Reasonable solutions FRIMO for lightweight parts
- 22.04.2020
- Plastics and Rubber products
- Automation
- Automotive
- Electromobility
- Cost savings
- Injection molding
Fiber composites are an indispensable basis for the modern production of lightweight parts, as they allow versatile processing and use for a variety of applications. They no longer find use only in the cosmic industry or exterior works of racing cars. The possibilities of their use are much wider...
Branch Dictionary
