Services - Current News Articles
Articles on Services. Daily updated information and news from the plastics industry.
-
Certification of plastics for contact with foodstuffs
- 05.12.2022
- Services
- Plastic packaging
- Plastic products
In the field of plastics for food contact, the new Commission Regulation (EU) 2020/1245 was approved. This primarily concerns manufacturers of packaging material: plastic films, cups, tubs, buckets, PET bottles, crates or...
-
The digitization of businesses and public administration will be accelerated by European digital innovation centers
- 25.11.2022
- Services
- Smart factory
- Industry 4.0
Industrial cluster - Association of intelligent industry - Industry4UM organized an online discussion forum where five Slovak representatives of the European Network of Digital Innovation Hubs (EDIH) were...
-
The European Commission presented the draft emission standard Euro 7/VII
- 18.11.2022
- Services
- Automotive
On November 10, 2022, the European Commission presented the draft Euro 7/VII emission standard. It replaces the current Euro 6/VI, or Euro VI-E, which since 2014 has undergone continuous additions, up to the currently valid version Euro 6d. The proposed standard tightens the emission limits for...
-
Easier orientation, much higher demands. Microsoft is changing the partner criteria
- 11.11.2022
- Services
- Software for industry
Microsoft has set stricter conditions for the entry of companies into the partner program. It is easier for the customers to choose a suitable supplier of IT solutions, but also significantly increased the pressure on the quality of (not only) Slovak partners. SOFTIP has already been included among...
-
TIP FOR A CHRISTMAS GIFT: Unique books for plastic industry with discount prices!
PlasticPortal.eu, as a branch portal for the plastics industry, also offers professional technical book publications. You will find many interesting titles in our portfolio. We are bringing a special pre-Christmas action to our loyal readers. You can buy all the titles we have in stock at the...
-
The CEE Automotive Supply Chain 2022 conference sought answers to current challenges and the future of logistics chains in the automotive industry
On October 11-12, 2022, the fifth annual conference and networking event Central European Automotive Supply Chain 2022 took place in Žilina. CEE Automotive Supply Chain, which is a joint activity of the Slovak Automotive Industry Association, the Czech Automotive Industry Association and four...
-
K 2022: Raw materials, Circular Economy Forum, press conferences, large photo gallery, halls 5-8
At this year's K 2022 trade fair in Düsseldorf, raw material producers presented hot trends in the field of bioplastics, the production of materials for electromobility, and how to reduce carbon emissions from products. This year, the Circular Economy Forum took place again at K, in which the...
-
K 2022: Machines and peripheral devices, large photo gallery, halls 1-4, 9-17
At the K 2022 trade fair in Düsseldorf, manufacturers of machines for the plastics industry focused mainly on current topics such as waste management, saving energy and resources, as well as environmental and climate protection. After 3 years, the manufacturers again presented the latest...
-
K 2022 – Trade fair results fulfil highest expectations
- 28.10.2022
- Services
- K Show
- Exhibitions
The joy of the plastics and rubber industry at finally being able to exchange ideas in person on a global level again after three years characterised K 2022 Düsseldorf and ensured an excellent mood among the 3,037 exhibitors. The companies reported extraordinarily good leads and a marked...
-
Vehicle manufacturers are making up for losses from the first half of the year, but expensive energy threatens the entire sector
- 24.10.2022
- Services
- Automotive
Car production in the Czech Republic has finally reached the black numbers after the summer months. A total of 801,774 new passenger vehicles (+3.4%) were produced since the beginning of the year. Behind the growth lies the improvement of the situation in the supply-customer chains, but also the...
-
63rd International Engineering Fair in Brno - photo gallery part 1
- 14.10.2022
- Services
- Photo reportage
- MSV Brno
- Exhibitions
In four days, over 52,000 visitors viewed the offer of the International Engineering Fair, which is an increase of 50 percent compared to last year. In the second part of our photo report, we bring you a photo gallery from pavilions V, A, B and...
-
63rd International Engineering Fair in Brno - photo gallery part 1
- 13.10.2022
- Services
- Photo reportage
- MSV Brno
- Exhibitions
The largest Central European fair of industrial technologies brought 1,256 exhibiting companies from 41 countries to one place. Compared to last year, the number of participants increased by 20 percent and the scope by three exhibition halls, when the exhibitors' stands filled a total of eight...
-
How to choose a suitable tool for organizing the work of reception and dispatch? The answer is Time Slot Control
- 12.10.2022
- Services
- Automation
- Storage
The main challenges to be solved include financial savings, ease of use or continuous development of solutions. Equally important is the degree of personalization ensuring perfect alignment with set internal processes. It is necessary to take into account the unique approach of each customer to...
-
JAN SVOBODA s.r.o. publishes the book Návrh a řešení vtokových soustav
The book by the American author John Beaumont with the original title "Runner and gating design handbook" with the subtitle "Tools for successful injection molding" is available on the Czech and Slovak markets in a Czech, corrected translation under the title „Návrh a řešení vtokových soustav“...
-
The MSV 2022 accompanying program will focus on digitization and energy
- 19.09.2022
- Services
- MSV Brno
- Exhibitions
Every year, the International Engineering Fair in Brno also includes an accompanying program intended primarily for the professional public. The main topics include digitization, energy, but also industry topics such as 3D printing or the plastic...
-
Thousands of university graduates are heading to the labor market. However, many of them are
- 14.09.2022
- Services
Letné mesiace bývajú na trhu práce rušné. Prichádzajú naň totiž tisíce absolventov vysokých škôl, ktorí hľadajú profesné uplatnenie. Požiadavky na zamestnávateľa však v posledných rokoch zmenili. Čerstvo vyštudovaní si napríklad často nárokujú vyššie finančné ohodnotenie či flexibilný pracovný čas....
-
3D measurement of the injection molds with a 3D scanner supplied by ADATEX, s.r.o.
- 05.09.2022
- Services
- 3D technology
- Injection molds
With the rapid development and tremendous technical progress across industries in the past decade, the structural design of products has become more complex and there are an unprecedented number of different mold shapes. With the increasing proportion of free-form surfaces and the increasing...
-
DENIOS: How to properly store dangerous substances?
Do you use substances dangerous for the environment, the health of employees or pose a fire risk in your activity? In that case, you must ensure by law that the storage and handling of these substances do not endanger the environment and the health of people and prevent the occurrence of...
-
Leave the preparation of the Product Conformity Assessment and Declaration of Conformity to the experts from PRVÁ CERTIFIKAČNÁ s.r.o.
- 12.08.2022
- Services
- Rubber
- Plastic products
The company PRVÁ CERTIFIKAČNÁ s.r.o. offers you a professional conformity assessment of products and preparation of a Declaration of Conformity. We will prepare a risk analysis and propose measures to eliminate risks. We will prepare the right production label for your...
-
MSV 2022: Digital Factory 2.0 will focus on the intelligent digitization of industry
- 03.08.2022
- Services
- MSV Brno
- Exhibitions
For the third time, Digital Factory 2.0 will also be part of the October International Engineering Fair in Brno, which this year will focus on intelligent digitization in various forms. The project will bring closer the technologies enabling the transformation not only of the industrial...
-
Car production in the Czech Republic is catching up with year-on-year losses
- 29.07.2022
- Services
- Automotive
Thanks to increased production in May and June, Czech automobile producers erased the double-digit year-on-year decline. Between January and June of this year, 606,909 passenger cars were produced, that is 8.5 percent less than in 2021. In June alone, 125,374 cars were produced in the Czech...
-
Warehousing outsourcing can significantly reduce business costs
It is not easy to decide whether your employees will also provide additional and support services to the main activity, or whether to hire an external company that specializes in these activities. Why companies of different sizes are increasingly opting for outsourcing of warehousing and related...
-
IPA Slovakia, s.r.o. presents the Quality Forum conference: Only quality people can produce quality?!
The inspiring Quality Forum, which will open its doors for the fourth time this year, will traditionally turn into a fountain of ideas, motivation and the search for meaning in what we do. In quality. Although it is used most often at the conference in all cases, "supporters of quality" know what...
-
SPK members recapitulated but also planned at their general meeting
On June 16, 2022, after a year, representatives of member companies of the Slovak Plastics Cluster (SPK) met again at the Mikádo Hotel in Nitra to evaluate what the year 2021 was...
-
Solid results of the Czech automotive industry despite the decline in production
- 29.06.2022
- Services
- Automotive
A pandemic also affected the performance of the automotive industry in 2021. Its consequences manifested themselves in the sector mainly in the second half of the year. The critical shortage of semiconductor chips, problems in supply and demand chains and logistics, the lack of raw materials,...
-
The NEWMATEC 2022 conference sought answers to current challenges and the future of the automotive industry
- 27.06.2022
- Services
- Events
- Automotive
- Photo reportage
The sixth annual Newmatec conference, which is considered to be the most important Slovak conference focused on the automotive industry, took place in the Hotel Partizan (Slovakia) on June 7-8, 2022. The program, which was dedicated to the current situation, but also to the most fundamental...
-
Production of Czech cars increased by 12.8% in May, approaching pre-crisis numbers
- 17.06.2022
- Services
- Automotive
For the first time this year, the May production of passenger cars in the Czech Republic exceeded the monthly production volumes of last year. The increase in production by 12.8% to 120,186 vehicles means an approach to pre-crisis monthly production volumes. This moderates the current year-on-year...
-
International Engineering Fair 2022 in Nitra - awards and photo report
- 01.06.2022
- Services
- Photo reportage
- MSV Nitra
- Exhibitions
After a two-year break, the 27th International Engineering Fair in Nitra took place on May 24-27, 2022. Visitors were able to visit the exhibitors again, who presented their latest technologies and...
-
MOLDS and PLASTICS 2022 - successful restart of the conference
- 27.05.2022
- Services
- Events
- Photo reportage
More than 120 participants visited the largest Czech plastics conference MOLDS and PLASTICS 2022 in the pleasant surroundings of the Maximus Hotel in Brno, Czech Republic. The conference is traditionally organized by JAN SVOBODA s.r.o. with partners and according to the final reactions of the...
-
MOL Group wants to fill more than 50 jobs with young people - recent university graduates
- 19.05.2022
- Services
- Business economics
MOL Group is opening a call to join for his annual Growww talent program. The development program is an ideal opportunity for recent graduates and graduates of master's or engineering studies who are looking for opportunities to start their careers in one of the largest companies in the...
Branch Dictionary
