Injection molds - Current News Articles
Articles on Injection molds. Daily updated information and news from the plastics industry.
Guide for toolmakers from technology-support s.r.o.
- 20.10.2020
- Latest News
- Injection molds
- Research
The Toolkit Solutions Wizard seeks to answer the question of how to improve the whole process from offering to delivering a tool to a...
-
Quick-action clamping systems for STRACK molds from VMM
- 20.10.2020
- Plastics Moulds
- Maintenance of injection molds
- Cost savings
- Injection molds
- Injection molding machines
Our innovative solution to reduce set-up costs and to increase flexibility due to fast and easy tool change on your injection moulding machine. The proven mechanical tool quick clamping system for injection moulding tools from STRACK NORMA is suited for two- and four bar versions of all...
-
Production of molds for processing thermoplastics and thermosets from Linaset a.s.
- 28.09.2020
- Plastics Moulds
- Injection molds
On the one hand, more than 50 years of production tradition, on the other, state-of-the-art machinery and construction software. This is the production of injection and direct molding molds for the processing of thermoplastics, thermosets, BMC and SMC at Linaset. The company is able to produce...
The company Plasty Gabriel s.r.o. invites you to the seminar Tempering of injection molds 2020
- 21.09.2020
- Latest News
- Events
- Injection molds
The seminar will take place on 25 November 2020 in the INTEMAC Research Center (TOS Kuřim...
-
Complex care of plastic injection molds from Formy Tachov s.r.o.
Mission Formy Tachov s.r.o. is to participate and assist customers in the smooth, efficient and highly economical production of plastic products. The company offers innovative development, design, production and service of plastic injection molds. The strategy of the company is to offer, develop...
-
Uneven filling of injection mold cavities and how to adjust the filling
- 09.07.2020
- Injection molds
Uneven filling of the cavity or cavities of the injection molds is a phenomenon that has been encountered by everyone involved in plastic injection technology. In this article from SMARTPLAST s.r.o. we will show what causes uneven performance and how it can be effectively...
-
Material 1.2738 TSHH immediately available from stock Meusburger
- 20.05.2020
- Plastics Moulds
- Injection molds
Especially for injection molds with a lower number of injections, it is increasingly important to shorten the passage time and optimize the costs. In addition, a flawless surface is often assumed for injection molded parts. Therefore, steel 1.2738 TSHH has long been established on the market. It is...
-
Conditions and concept of molding - Design and production of injection molds, Lubomír Zeman, part 2.
- 25.02.2020
- Plastics Moulds
- Design of molds
- Injection molds
In two parts we bring you a continuation of a professional article on the design and manufacture of injection molds by Mr. Lubomír Zeman from the company PLAST FORM SERVICE, s.r.o. dated...
-
Conditions and concept of molding - Design and production of injection molds, Lubomír Zeman, part 1.
- 18.02.2020
- Plastics Moulds
- Design of molds
- Injection molds
We present in two parts a professional article on the design and manufacture of injection molds by Mr. Lubomir Zeman from the company PLAST FORM SERVICE,...
-
FORMAT, s.r.o. - experience is important in the manufacture of injection molds
Finding a suitable injection mold manufacturer may seem a relatively simple matter. However, the alpha and omega of choice is by far not only the state-of-the-art technological background of the subject, but mainly the experience of its designers and production experts. The company Format s.r.o.,...
New 2K injection molding solution on existing injection molding, fully electric, clamp on solid injection molding plate
Mold-Masters, the world's leading manufacturer and innovator of hot runners, owning more than half of the hot runner patents, has developed a multi-component solution for the needs of multicomponent manufacturing companies that allows to use the existing single-component injection molding machine...
-
Compact design of single valve system - closed VeriShot single nozzle
- 14.08.2019
- Machinery & Equipment
- Injection molds
VeriShot is compact, precise, greatly reduces the height of the mold and also works as a positioning collar for a perfect fit between mold and injection molding. VeriShot offers advanced heating technology that provides optimum control and provides exceptional thermal performance and part...
UNLIMITED TECHNOLOGY sells products for mold maintenance and plastic molding
Business Strategy of Unlimited Technology s.r.o. is not to compete with large competing resellers in sales volumes but to focus on the high quality of the products and the flexibility to meet customer...
-
New Advanced feature for the FLEXflow Controller: from the simulation analysis to the molded part.
HRSflow is proud to present newly implemented software for the FLEXflow Control Unit. The controller, provided with updated features, allows users to convert data of any filling simulation performed by HRSflow into data that can be preset automatically in the control unit and also in the injection...
-
Arburg to build new assembly hall at central production site in Lossburg
On 16 May 2019, Arburg officially marked the start of construction on a new assembly hall with a ground-breaking ceremony. With the new building, production capacities for large Allrounder injection moulding machines and customer specific turnkey systems are being further expanded. The investment...
-
FREMACH TRNAVA, s.r.o. - Impact of viscosity for filling of the injection mold cavity
- 20.06.2019
- Plastics Moulds
- CAD/CAM
- Maintenance of injection molds
- Injection molds
- Injection molding machines
- Injection molding
The aim of this work is to bring closer the rheological properties of plastics and their impact on technology in the plastics processing industry. The paper focuses on the influence of the viscosity of the material for filling the mold cavity. 4 materials are tested with the settings of process...
SLER Plastic s.r.o. offers complex plastic parts solutions
- 14.06.2019
- Latest News
- Plastic products
- Injection molds
SLER s.r.o. is an engineering company focusing mainly on the production of tools, molds, jigs, shearing and bending machines and repair of injection mold tools. The main customers are manufacturers and suppliers of plastic components for the automotive industry and white goods...
-
New tool shop of EISC s.r.o. in Slovakia
EISC s.r.o. has a long tradition in the production of injection molds in the Czech Republic. Since September 2018, it has been building its new operations in Slovakia. They chose Spišská Nová Ves as their place of operation, where they try to provide customers with a complete service on an area of...
-
HRScool enables hot runner systems with uncooled cylinder
- 23.04.2019
- Plastics Moulds
- Hot runners
- Injection molds
HRScool is an innovative solution for hot runner injection molding, in which the otherwise necessary water cooling of the corresponding actuator can be dispensed...
Sales of injection molding machines in the Czech and Slovak Republics in 2018
Since 2011, PlasticPortal.eu® has been conducting an annual survey of injection molding sales in the Czech and Slovak Republics. Also this year, the survey results represent a fairly accurate picture of the market, as all major injection molding contractors provided their data. A total of 30...
-
With Meusburger in 5 minutes solve hot runner molds
With the all-new Meusburger configurator for hot runner molds, a complete mold design is created with just a few clicks. The configurator is interesting with maximum flexibility, immediate 3D data creation and immediate pricing. This world novelty is the result of excellent collaboration between...
-
Multidose from Stäubli have received excellente customer references
- 27.03.2019
- Plastics Moulds
- Injection molds
The Siemens Mohelnice plant is the largest European plant for the production of low-voltage asynchronous electric motors, which was founded in 1904. Siemens also manufactures electric motors in the Drásov and Frenštát pod Radhoštěm...
-
Car TATRA 815 by PF PLASTY CZ has won the test TEST DNES - Czech Product
More than sixty-year tradition in the production of injection molds and moldings made of plastics with use in various fields of industry enables PF PLASTY CZ to produce demanding molds and moldings. During its operation, the company started production of Tatra 815, which has now become the winner...
-
Innovations by Meusburger for the modular concept
Meusburger presents exclusive and groundbreaking innovations for the modular concept at the Stanztec trade fair. The E 5076 and E 5078 Module guides are now available in configurable lengths. This offers the customer maximum flexibility during the design of die...
-
Controlled gas springs from E - Normalie servis s.r.o.
The current automotive industry is under constant pressure as a result of ever-increasing demands for comfort, safety, emission reductions and, of course, the price of cars. For this reason, it is necessary to follow the trends in the automotive...
-
HEYCO’s strategic partnership with Synventive
- 25.05.2018
- Machinery & Equipment
- Hot runners
- Injection molds
The HEYCO company was founded in 1937. From 1980 onwards, the original production of hand tools expanded to include plastic parts and forgings, with HEYCO becoming a leading supplier for the automotive...
-
Austria's z-Werkzeugbau shows demoulding in four directions
- 11.05.2018
- Plastics Moulds
- Design of molds
- Injection molds
At the Drinktec show in Munich, the Dornbirn, Austria-based company had moulds in operation in cap moulding demonstrations at three injection press suppliers: Arburg, SHI-Demag and...
New STRACK locking plates for slide holding devices
- 12.07.2017
- Latest News
- Standardized parts
- Injection molds
Now we can combine: New STRACK locking plates for slide holding...
