Plastics Moulds - Current News Articles - page 4
Articles on Plastics Moulds. Daily updated information and news from the plastics industry.
-
The cleaning unit cooling circuits forms from Alfa Chrom s.r.o.
- 21.10.2015
- Plastics Moulds
- Maintenance of injection molds
The device is a compact unit serving as a reservoir for the chemical own assets, holding tank, pipes, stainless steel ball valves, stainless steel Heating element and the sensor, and a digital thermostat stainless steel pump, larger aggregates of a frequency converter for speed control of the...
-
Tempering injection molds - an important prerequisite for the production of thermoplastic moldings, Part 4
- 18.09.2015
- Plastics Moulds
The aim of constructor injection mold should be such proposal tempering plants that, while recognizing all possible restrictive criteria, will work with maximum efficiency in terms of the heat transfer while minimizing the surface area basis walls tempering...
-
Tempering injection molds - an important prerequisite for the production of thermoplastic moldings, Part 3
- 11.09.2015
- Plastics Moulds
(Continued) The mold temperature and its...
-
Tempering injection molds - an important prerequisite for the production of injection molded thermoplastics, part 2
- 04.09.2015
- Plastics Moulds
(Continuation )Mold temperature. Injection mold is viewed from thermal processes taking place in it is a very complex mechanism. For each production cycle in the appropriate dosage forms melt into the supply of certain heat...
-
Tempering injection molds - an important prerequisite for the production of injection molded thermoplastics, part 1
- 27.08.2015
- Plastics Moulds
The temperature of the walls of cavities of the injection mold for the processing of thermoplastics and composites with a thermoplastic matrix is a key process parameters in the production of...
-
Synventive introduces new 09E threaded nozzle for use with company’s Plug‘n Play® unitized hot runner systems
- 08.07.2015
- Plastics Moulds
Threaded Nozzle Design Provides Leakproof...
-
Conference Moulds Brno 2015
- 03.06.2015
- Plastics Moulds
In a pleasant environment of the Brno dam in the hotel Maximus Resort, held from 27 to 28 May 2015 the company JAN SVOBODA s.r.o. again after its already traditional seminar focused on injection mold technology, and plastics processing. It can be said that this seminar is the largest professional...
-
KOH-I-NOOR wants to create one of the largest toolroom in Europe
- 06.04.2015
- Plastics Moulds
- Toolmaker
Robert Záboj leads engineering division holding Koh-i-noor, which is the youngest and fastest growing. Now Machinery division employs about 800 people, this year's turnover is expected to be around 900 million...
-
Synventive Hot Runner Solves Challenging Multi-Component Application for Bosch Power Tools
- 19.02.2015
- Plastics Moulds
- Hot runners
A Bosch cordless hammer drill that has won awards for quality, ease of use and ergonomic design is being molded using a unique multi-component hot runner system from...
-
The new generation of centering the mold - JAN SVOBODA s.r.o.
- 22.01.2015
- Plastics Moulds
- Design of molds
- Standardized parts
Centering elements of Progressive Components that looks at the first glance different thanks to the traditional combination of black and gold color on the surface, the plastics processing applied for almost 25 years. During this time, many manufacturers of parts for molds tried to mimic the look...
-
ORYCON - the only hot runner systems manufactured in the Czech Republic
- 15.01.2015
- Plastics Moulds
- Hot runners
Company Orycon EU was founded ten years ago. Its program is based on the technology, principles and experience Orycon US American company, which operates in the United States since the eighties. Orycon EU provides a comprehensive menu of hot runner, ie. development, design, installation, service,...
-
FREEDOM is a MachineLOG IT - knowledge and service support machines and tools, Part 3
- 31.12.2014
- Plastics Moulds
This system can provide better and easier support for technicians can also provide information for managers arranged through the administration interface in real time. The fully replaces paper and enables centralized dispatch enter and track data from the maintenance or repair of...
-
SVOBODA presents a MachineLOG IT - knowledge and service support machines and tools, Part 2
- 24.12.2014
- Plastics Moulds
This system can provide better and easier support for technicians can also provide information for managers arranged through the administration interface in real time. The fully replaces paper and enables centralized dispatch enter and track data from the maintenance or repair of...
-
SVOBODA presents MachineLOG IT - Knowledge and Support of machines and tools, part 1
- 17.12.2014
- Plastics Moulds
Today is a big shortage of technically trained personnel and the problem continues to grow. Top technology is becoming less and the cost grows in proportion to how are diminishing. Technicians also very often spend time inefficiently solution to recurring...
-
Repair tools and molds by TTW from Indsatsen
- 02.09.2014
- Plastics Moulds
Not yet known and commonly used methods of renovation molds and tools surfacing, such as plasma welding, TIG - welding tungsten electrode in argon, MIG / MAG, pulse microsurfacing (slicing), are indeed a great asset for repairs, yet they face a certain...
-
End of diesel effect in the forms
- 12.08.2014
- Plastics Moulds
Japanese firm SAITO mold, developed and successfully launched the breather system ECOVENT. Problems vent cavity injection part is due to increasingly complex shapes one of the most important factors in the quality of the final part. Whether it is a connecting line, burned parts (diesel effect),...
-
Optimizing profitability plastics molding
- 15.07.2014
- Plastics Moulds
Expert system CalcMaster 7.2 operating on the principle reflected wave brings new possibilities in the process of supply and demand for molds for plastics and light metals. The system integrates the issues of price and quality depending on the form and injection conditions before starting the...
-
Nozzle Heating Elements hotslot® from Hotset ČR s.r.o.
- 08.07.2014
- Plastics Moulds
Even for nozzle heating, hotset offers specific heating elements for each...
-
The unit for maintenance and testing of molds
- 30.06.2014
- Plastics Moulds
The company SVOBODA provides a comprehensive supply of semi-finished molding tools and light metals, but also for forming tools since 1995. It offers complete support for cooling systems from the Italian...
-
FORMS Conference in Brno 2014
- 20.06.2014
- Plastics Moulds
Company Jan Svoboda and Uniplast Brno organized at Fountain hotel in Brno every year´s edition of the conference Forms, which is currently one of the largest such domestic gathering, an organization dedicated to plastics processing technology. Invitation to conference accepted about a hundred...
-
Synventive Introduces SynFlow® Two-Speed Sequential Valve Gating Hot Runner Technology
- 29.05.2014
- Plastics Moulds
Synventive Molding Solutions announced today the availability of its SynFlow® two-speed sequential valve gating hot runner technology. The unique, cutting edge technology provides molders with optimized plastic flow control, and solves common surface defect problems on large parts such as...
-
HASCO Ejector sleeve with DLC coating
- 26.02.2014
- Plastics Moulds
- Design of molds
- Standardized parts
Ejectors are some of the parts that are subject to the most stress in the mould. With its extensive range of ejector elements and numerous combination options for ejector pins and sleeves, either with or without a coating, HASCO offers individually-tailored solutions for functional component...
-
Quality molds from China: hot topic and prejudice?
- 18.02.2014
- Plastics Moulds
The total number of forms made through our company in China is about 30 instruments a year. Of these corollary fear of poor design tool, or use low quality steel. I certify that this concern is perfectly legitimate, and more easier to cooperate with China treats. In order to evaluate this concern,...
-
Partner for technical applications - INCOE ®
- 17.02.2014
- Plastics Moulds
Injection molding technology has penetrated into the development and production of parts and equipment in almost all areas of everyday life. An important prerequisite for this development is constantly increasing the effectiveness and efficiency of production processes with new materials, new...
-
Conformal cooling simulation and analysis Cadmould ® 3D-F
- 09.10.2013
- Plastics Moulds
Conformal cooling shortens injection cycle up to 50%. Simulation software Cadmould ® 3D-F offers Plasty Gabriel...
-
Šlechta s.r.o. in new hall!
- 18.09.2013
- Plastics Moulds
Šlechta Company, which is engaged in the preparation of molds for plastic products, opened a production facility in the old premises of the former laundry in J....
-
Effect of Temperature of injection molds for the quality and price of thermoplastic moldings (part 1)
- 06.09.2013
- Plastics Moulds
The term tempering molds we include cooling or heating of the forming mold parts with a tempering medium to the desired temperature before the start of production and maintaining the operating temperature during cyclic injection in the desired tolerance range. When tempering leads to...
-
Possible savings in injection molding (part 2)
- 19.08.2013
- Plastics Moulds
Industrial processing of polymeric materials in the Czech Republic is a major industry with a relatively long history. It's very rugged sector, which is producing large quantities of parts for various applications. Automotive industry is one of the most important, if not the first of the key...
-
The influence of residual stress on the quality of injection molded parts
Residual stresses are present in all injection molded throughout their life and have a major impact on the quality of splash and its behavior. Explain how the residual stress formed and introduced their calculation on several...
-
Possible savings in injection molding (Part 1)
- 12.08.2013
- Plastics Moulds
Industrial processing of polymeric materials in the Czech Republic is a major industry with a relatively long history. It's very rugged sector, which is producing large quantities of parts for various applications. Automotive industry is one of the most important, if not the first of the key...
Latest Classifieds
For Sale: Original granulates LDPE, HDPE, PE, PP, PET
26.07.2022 | ID: 20229168
Top AdvertFor Sale: LDPE regranulat (EPE foam)
28.03.2024 | ID: 202418847
For Sale: Protective sheets for welding boxes
27.03.2024 | ID: 202418846
For Sale: Regrind black PPPE injection
26.03.2024 | ID: 202418845
-
25.03.2024 | ID: 202418844
Cooperation: Recycling of plastic waste
25.03.2024 | ID: 202418843
For Sale: PA 66 GF 30 regrind natur+white
25.03.2024 | ID: 202418842
-
21.03.2024 | ID: 202418823
To purchase: LDPE film, 500 t/month
21.03.2024 | ID: 202418813
-
20.03.2024 | ID: 202418812
To purchase: PE 50 t films in rolls - new
20.03.2024 | ID: 202418810
To purchase: GPPS transparent regrind
06.03.2024 | ID: 202418731
To purchase: Bayblend T 80 XG BBS910
22.02.2024 | ID: 202418671
-
20.02.2024 | ID: 202418666
For Sale: Original granulates LDPE, HDPE, PE, PP, PET
26.07.2022 | ID: 20229168
Top AdvertFor Sale: LDPE regranulat (EPE foam)
28.03.2024 | ID: 202418847
For Sale: Protective sheets for welding boxes
27.03.2024 | ID: 202418846
For Sale: Regrind black PPPE injection
26.03.2024 | ID: 202418845
-
25.03.2024 | ID: 202418844
For Sale: PA 66 GF 30 regrind natur+white
25.03.2024 | ID: 202418842
-
25.03.2024 | ID: 202418841
Upcoming Events
01.04.2024 - 30.04.2024 | Paríž
03.04.2024 - 05.04.2024 | Tashkent
09.04.2024 - 12.04.2024 | Mníchov
09.04.2024 - 11.04.2024 | Gorinchem
11.04.2024 - 14.04.2024 | Bratislava
15.04.2024 - 19.04.2024 | Düsseldorf
16.04.2024 - 18.04.2024 | Abu Dhabi
16.04.2024 - 18.04.2024 | Bydgoszcz
17.04.2024 - 20.04.2024 | Istanbul
25.03.2024
26.03.2024
01.04.2024
03.04.2024
09.04.2024
Project management - effective project management
25.03.2024
10.04.2024
Training - Injection moulding technology I.
15.04.2024
Festival of personnel and talent development
16.04.2024
17.04.2024
Job offers
Store manager - Ecocycle s.r.o
25.03.2024
Brusič na kulato - KOVOROB, s.r.o.
22.03.2024
Head of tool shop - KOVOROB, s.r.o.
22.03.2024
Designer of plastic injection molds - KOVOROB, s.r.o.
22.03.2024
Warehouseman/warehouse (valid VZV license as a condition) - EXPLAST Slovensko, s.r.o.
14.03.2024
Adjuster - AIS Automotive Interior Systems Slovakia s.r.o.
13.03.2024
Toolmaker - AIS Automotive Interior Systems Slovakia s.r.o.
13.03.2024
Plastic processing worker - Hard Plastic Recycling s.r.o.
13.03.2024
Sales Representative - ULTRAPOLYMERS, s.r.o.
12.03.2024