Plastics Moulds - Current News Articles - page 2
Articles on Plastics Moulds. Daily updated information and news from the plastics industry.
-
HRSflow at K 2019: State-of-the-art hot runner solutions to be presented live at partner sites
- 08.10.2019
- Plastics Moulds
- Hot runners
At K 2019, which takes place from 16 to 23 October in Düsseldorf, challenging state-of-the-art applications of HRSflow’s FLEXflow hot runner technology will be presented at several booths of partnering machine producers. Some of these will use the company’s FLEXflow One electrically driven valve...
-
Product Relationship Management - an active Industry 4.0 application in real life
- 09.09.2019
- Plastics Moulds
- Industry 4.0
- Software for industry
MLIT is PRM (Product Relationship Management) - an active Industry 4.0 application in real life. Unlike standard CRM, where support is client-bound, the MLIT support and tracking always links to the product. Tracking and communicating on a project from the entire production chain cannot be defined...
-
LASCAM systems s.r.o.: cutting and cleaning in the plastics industry in top quality
- 03.09.2019
- Plastics Moulds
- Lasers
Technological progress also brings higher quality requirements. Manufacturers are looking for ways to streamline production. It is also associated with the purity of the forms, which ensures that there are no visible marks on the final products. Laser technologies provide solutions for these...
-
New Advanced feature for the FLEXflow Controller: from the simulation analysis to the molded part.
HRSflow is proud to present newly implemented software for the FLEXflow Control Unit. The controller, provided with updated features, allows users to convert data of any filling simulation performed by HRSflow into data that can be preset automatically in the control unit and also in the injection...
-
FREMACH TRNAVA, s.r.o. - Impact of viscosity for filling of the injection mold cavity
- 20.06.2019
- Plastics Moulds
- CAD/CAM
- Maintenance of injection molds
- Injection molds
- Injection molding machines
- Injection molding
The aim of this work is to bring closer the rheological properties of plastics and their impact on technology in the plastics processing industry. The paper focuses on the influence of the viscosity of the material for filling the mold cavity. 4 materials are tested with the settings of process...
-
Design of molds with the help of CAD / CAM Cimatron in Konštrukcia Pittner
- 02.05.2019
- Plastics Moulds
- CAD/CAM
- Software for industry
Juraj Pittner has been in the world of injection molds for 20 years and since 2011 he has his own design office. He worked as a technologist and constructor in the German company Meinecke Formenbau GmbH. For his work he uses the Cimatron CAD / CAM solution, which is primarily intended for...
-
Synventive Introduces eGate® 2.0 – Advanced Electric Actuation for Large Part Applications
- 26.04.2019
- Plastics Moulds
- Standardized parts
- Peripherals
Synventive, a business within Barnes Molding Solutions strategic business unit, is pleased to announce the release of eGate® 2.0, the latest addition to its activeGate control technologies. eGate delivers complete pin movement control for large part sequential valve gated...
-
HRScool enables hot runner systems with uncooled cylinder
- 23.04.2019
- Plastics Moulds
- Hot runners
- Injection molds
HRScool is an innovative solution for hot runner injection molding, in which the otherwise necessary water cooling of the corresponding actuator can be dispensed...
-
Use of thermocouple temperature measurement - thermograms - for thermoplastic injection molding and thermoplastic composite materials, part 1
Injection is a discontinuous production process - it is a cyclical production and therefore a prerequisite for quality production is process stability, while maintaining other optimized parameters. Therefore, it is necessary to ensure that each subsequent injection cycle has the same course as the...
-
Multidose from Stäubli have received excellente customer references
- 27.03.2019
- Plastics Moulds
- Injection molds
The Siemens Mohelnice plant is the largest European plant for the production of low-voltage asynchronous electric motors, which was founded in 1904. Siemens also manufactures electric motors in the Drásov and Frenštát pod Radhoštěm...
-
Wireless system for checking the number of cycles via Bluetooth interface from E - Normalie servis s.r.o.
The MoldMaker system is a complete technologically-informative solution designed for small, but also large companies dealing with plastic processing. It uses a cycling engine mounted onto the injection mould to determine the current injection moulding...
-
Czech and Slovak users appreciate CAD / CAM Cimatron from technology-support s.r.o., part 2.
- 16.01.2019
- Plastics Moulds
- CAD/CAM
- Software for industry
Continuation of article technology-support s.r.o. dated...
-
Autodesk Simulation Moldflow Digital Prototype from SMARTPLAST s.r.o.
The Autodesk Simulation Moldflow digital prototype enables optimization of the plastic injection process - from optimizing the design of the product itself through the settings of the injection molding machine and choosing the most suitable plastic to optimizing the production tool, injection...
-
New version of Moldex3D R16 simulation software from SimulPlast accelerates innovations of injected plastic parts
Thanks to enhanced functionality and enhancement, the latest version of the Moldex3D plastic injection molding software enables the new product development cycle and deliver them on the market in shorter time. So the Moldex3DR16 allows to achieve higher levels of efficiency and reliability of...
-
PEARTEC s.r.o. opened a new tool shop in Pilsen
PEARTEC has a seven-year tradition of producing injection molding tools in China. Since July 2018 he has been building operation at Krašovská 2265/7. In the team, they have cutting-edge tools, and metalworkers. The company's interest is to provide the customer with complete service in the injection...
-
Automatic optimization of plastic parts in air and water from Plasty Gabriel s.r.o.
Virtual and real VARIMOS® system can objectively design a construct and technological solution to produce the best possible, predefined, qualitative results. VARIMOS® consists of two basic parts - virtual and...
-
Tankplatten STRACK - flexible alternative from VMM s.r.o.
- 05.09.2018
- Plastics Moulds
- Standardized parts
Gas springs are increasingly indispensable in the production of tools because they provide great strength and long distance. However, this advantage is also one of the biggest disadvantages of these...
-
Servo-electric HRSflow hot runner systems support the large-series production of ultra-light center armrests
- 23.07.2018
- Plastics Moulds
The production of a lightweight center armrest for the automotive interior is one of the latest examples of the use of the innovative FLEXflow technology from Italian hot runner specialist, HRSflow.The multi-step process combines the thermoforming of a composite sheet with the injection molding of...
-
Austria's z-Werkzeugbau shows demoulding in four directions
- 11.05.2018
- Plastics Moulds
- Design of molds
- Injection molds
At the Drinktec show in Munich, the Dornbirn, Austria-based company had moulds in operation in cap moulding demonstrations at three injection press suppliers: Arburg, SHI-Demag and...
-
Reduce deformation and defects of molded parts using Moldflow Part 2.
Continuation of Article p. Halaška dated...
-
Reduce deformation and defects of molded parts using Moldflow Part 1.
- 24.04.2018
- Plastics Moulds
- Software for industry
In the standard design of the design, the designer and designer's experience is mainly used. To what extent was the design of the spray and mold successful after the injection molding process and after the molding of the moldings. The same applies to the parameters of the injection process itself,...
-
New: Pre-hardened HASCO steel 1.2714HH
- 17.04.2018
- Plastics Moulds
- Design of molds
As a strong, leading international supplier of modular standard components and accessories, HASCO is constantly working on new solutions for mould-makers. An important area of innovation concerns the steel used to make the tools and...
-
CECHO - BOHUMIL CEMPÍREK s.r.o. market since 1995
CECHO was established in 1995 as a small family business with 5 employees. Since then, many have changed. From a company that trades only ourselves, we have built a company that produces its own molds and operates its own plastic injection molding workshop. It was not...
-
Advanced simulations of CNC virtual machining to increase productivity
- 15.02.2018
- Plastics Moulds
- Software for industry
CNC machining of form-complex parts, as they typically represent molds, represents complex tasks that meet the requirements for productive production while simultaneously meeting high requirements for surface quality and accuracy. Good preparation of NC data, machine check and machining are the...
-
Lubomír Zeman: Operation, maintenance and repair of injection molds, Part 4.
- 08.02.2018
- Plastics Moulds
- Maintenance of injection molds
Continuation of Article p. Lubomir Zeman dated...
-
Lubomír Zeman: Operation, maintenance and repair of injection molds, Part 3.
- 01.02.2018
- Plastics Moulds
- Maintenance of injection molds
Continuation of Article p. Lubomir Zeman dated...
-
Lubomír Zeman: Operation, maintenance and repair of injection molds, Part 2.
- 25.01.2018
- Plastics Moulds
- Maintenance of injection molds
Continuation of Article p. Lubomir Zeman dated...
-
Lubomír Zeman: Operation, maintenance and repair of injection molds Part 1.
- 18.01.2018
- Plastics Moulds
- Maintenance of injection molds
For the correct operation of the injection molds, including the economic aspect, it is necessary to ensure optimal operating conditions and conditions for its use in production.Certain robustness of injection molds due to their stiffness requirements may cause less sensitive access to them....
-
Plasty Gabriel: Development of the injection mold from a simulation analysis CADmould a VARIMOS
- 15.01.2018
- Plastics Moulds
- Injection simulation
During the design and manufacture of the P 10 C injection mold have been used several times simulations CADmould and VARIMOS. In this article you will be familiar with the benefits of the calculations and the problems they...
Latest Classifieds
-
03.05.2024 | ID: 202419068
Top Advert Cooperation: Free production capacity on injection molding and extrusion line
04.04.2024 | ID: 202418891
Top AdvertFor Sale: PA6.6.-GF, origin materials
14.05.2024 | ID: 202419158
-
13.05.2024 | ID: 202419156
For Sale: PA 6.6 Ultramid A3U42G6 grind
13.05.2024 | ID: 202419155
For Sale: Color Masterbatches on LLDPE carrier
13.05.2024 | ID: 202419154
For Sale: Moisture absorber (Desiccant) 200 t every month
13.05.2024 | ID: 202419153
To purchase: Package quality LDPE film. 500 t/month
13.05.2024 | ID: 202419149
To purchase: Dirty granulates from ground
13.05.2024 | ID: 202419147
To purchase: PA 6/66 GF 30 regrind
13.05.2024 | ID: 202419142
To purchase: PA 6/66 GF 30 regrind
07.05.2024 | ID: 202419102
To purchase: LDPE Regranulate light
07.05.2024 | ID: 202419101
-
26.04.2024 | ID: 202419032
To purchase: PPSU regrind banner
17.04.2024 | ID: 202418988
-
03.05.2024 | ID: 202419068
Top Advert For Sale: PA6.6.-GF, origin materials
14.05.2024 | ID: 202419158
-
13.05.2024 | ID: 202419156
For Sale: PA 6.6 Ultramid A3U42G6 grind
13.05.2024 | ID: 202419155
For Sale: Color Masterbatches on LLDPE carrier
13.05.2024 | ID: 202419154
For Sale: Moisture absorber (Desiccant) 200 t every month
13.05.2024 | ID: 202419153
For Sale: Plnivo PE - PP CaCO3 Filler Masterbatch
13.05.2024 | ID: 202419152
Upcoming Events
MSV Nitra 2024, International Engineering Fair Nitra
21.05.2024 - 24.05.2024 | Nitra
21.05.2024 - 24.05.2024 | Kielce
International Technics Fair 2024
21.05.2024 - 24.05.2024 | Belehrad
28.05.2024 - 07.06.2024 | Düsseldorf
28.05.2024 - 30.05.2024 | Kyiv
04.06.2024 - 07.06.2024 | Wels
04.06.2024 - 07.06.2024 | Lyon
04.06.2024 - 06.06.2024 | Štuttgart
04.06.2024 - 07.06.2024 | Buenos Aires
13.05.2024
14.05.2024
14.05.2024
Romexpo Metalshow TIB- Bucharest 2024
14.05.2024
15.05.2024
15.05.2024
16.05.2024
16.05.2024
Plastic Injection Molding Seminar for Technologists and Adjusters I
20.05.2024
20.05.2024
Job offers
Supplier development specialist - HYDAC Electronic, s.r.o.
13.05.2024
Sales representative - sales specialist - Plastcom, spol. s r.o.
09.05.2024
Senior CNC milling machine in piece production - Branson Ultrasonics, a.s.
09.05.2024
Injection molding adjuster - BOURBON AP Nitra, s.r.o.
09.05.2024
Tooling Leader - Xinquan Slovakia Automotive Trim s.r.o.
29.04.2024
Moulding Machines Setter - Tristone Flowtech Slovakia s.r.o.
11.04.2024
Plastic worker, gluing staff - FORM s.r.o.
10.04.2024
Logistics, warehouse and shipping supervisor - KNP s.r.o.
09.04.2024
Warehouseman - AIS Automotive Interior Systems Slovakia s.r.o.
09.04.2024