Plastics Processing - Current News Articles - page 3
Articles on Plastics Processing. Daily updated information and news from the plastics industry.
-
Stratasys is a revolutionary 3D Printer J750, which handles full-color and multi-material printing
- 06.05.2016
- Plastics Processing
- 3D technology
This 3D printer is the only one in the world that produces full-color, multi-material prototypes and components in a single print job, eliminating the time-consuming processes, accelerating conceptual product development, design and decision-making and...
-
Radiation crosslinking of products
- 16.03.2016
- Plastics Processing
- Radiation technologies
eBeam-treatment is a versatile and efficient method to improve the performance of polymers used in various technical applications. The cable industry utilizes this technology since many years to improve the performance of cable insulations. Ing. Michal Danek, Ph.D. of the company BGS...
-
Welding plastics - large-volume reservoirs in agricultural and industrial technology from the company KOVACAR
- 11.02.2016
- Plastics Processing
- Welding of plastics
Plastic welding belongs to a group of specific technologies, which basically consists of three basic factors: 1) theoretical knowledge, 2) technical and technological equipment, 3) extensive experience. A combination of all three factors can predict that nearly every activity will bring the desired...
-
Hand in hand with the success INCOE
- 08.12.2015
- Plastics Processing
- Hot runners
As for product development is the focus on customer needs and what it has to do with small spacing between cavities in the form? A crucial role is played by the heating nozzle, developed by the manufacturer hot runner,...
-
Dimension and shape tolerances, surface finish with thermoplastic injection, Part 3
- 06.08.2015
- Plastics Processing
Continued article dated...
-
Dimension and shape tolerances, surface finish with thermoplastic injection, Part 2
- 30.07.2015
- Plastics Processing
(Continued) Some companies are working according to the standards DIN, therefore I will bring a solution tolerance according to DIN standards. In October 2009, the original standard DIN 16 901- 1982 canceled after lengthy discussions and review procedure issued a DIN German Institute Deutschen...
-
Dimension and shape tolerances, surface finish with thermoplastic injection, Part 1
- 23.07.2015
- Plastics Processing
Injection molding is one of the cyclic processes which are characterized in that the process material is in the cycle at any time does not receive, from the thermodynamic point of view, the whole equilibration state due to the conditions in which it is...
-
BGS creates new capacities for gamma irradiation
- 12.06.2015
- Plastics Processing
- Radiation technologies
BGS Beta-Gamma-Service GmbH & Co. KG, Germany’s leading provider of irradiation services with headquarters in Wiehl near Cologne, invests approx. 14 mill. € in the construction of a new gamma irradiation plant. The new plant will be built at the BGS-site in Bruchsal near Karlsruhe and will have a...
-
Synventive Introduces activeGate™
- 13.05.2015
- Plastics Processing
Synventive Introduces activeGate™, New Tool-Based Molding Technology for Unprecedented Control of the Hot Runner Molding...
-
Expanding capacity at BGS Beta-Gamma-Service successfully completed
- 11.05.2015
- Plastics Processing
- Radiation technologies
The upgrade at the Bavarian Saal to the increases in capacity requirements to sterilization by...
-
Drying material with Luger s.r.o. - thanks to stable conditions ATTN and Eta+
- 13.04.2015
- Plastics Processing
In the manufacturing of plastics material moisture has decisive influence on process safety and product quality. Quality issues of finished parts need not necessarily be visible. Hidden defects, for example. reduced mechanical strength can often reveal a costly analytical...
-
Cleaning technologies of extruders using purging compound Ultra Plast
- 08.04.2015
- Plastics Processing
- Cleaning granulate
Manufacturing plant Festo Production Ceska Lipa is engaged in production of hoses for industrial automation with a tradition since 1998. The approximate monthly output hoses of different versions is 4,500,000 meters. Hoses are extruded to a total of 16 production lines, of which 11 were treated...
-
Radiation Crosslinking – way to improve the properties of polymers, Part 3
- 02.03.2015
- Plastics Processing
- Radiation technologies
The last part of the article about the method for improving the properties of polymers - radiation crosslinking, the first part was published on February 16, 2015 and the second part was published on February 23,...
-
Radiation Crosslinking – way to improve the properties of polymers, Part 2
- 23.02.2015
- Plastics Processing
- Radiation technologies
Continuation of the article on methods of improving the properties of polymers - radiation crosslinking from...
-
Radiation Crosslinking – way to improve the properties of polymers, Part 1
- 16.02.2015
- Plastics Processing
- Radiation technologies
eBeam-treatment is a versatile and efficient method to improve the performance of polymers used in various technical applications. The cable industry utilizes this technology since many years to improve the performance of cable insulations. Chemical processes induced by ionizing radiation can be...
-
Composites with thermoplastic matrix and automotive, Part 5
- 12.01.2015
- Plastics Processing
- Automotive
- Composites
Dry granulation - in hygroscopic matrices and reinforcing fillers is necessary before the injection process technology operations include drying the granules. Of course, the granules supplied from the manufacturer in a dry state, this operation is omitted. But always be dried granules uneaten after...
-
Composites with thermoplastic matrix and automotive, Part 4
- 05.01.2015
- Plastics Processing
- Automotive
- Composites
Abrasiveness, increased injection pressure - of course also affect the design of injection molds for processing composites LFT, especially the selection of appropriate materials, shapes and forms part of the dimension in terms of...
-
Composites with thermoplastic matrix and automotive, Part 3
- 29.12.2014
- Plastics Processing
In relation to the environmental efforts of car manufacturers to reduce their weight, carbon footprint, emissions, including the production of electrically driven, respectively hybrid cars coming to the fore as the use of composites filled with carbon...
-
Composites with thermoplastic matrix and the automotive industry, Part 2
- 22.12.2014
- Plastics Processing
Generally, the term composites, composite comprising heterogeneous systems consisting of at least two phases. More phase materials, which rank among the composites have certain...
-
Composites with thermoplastic matrix and automotive, Part 1
- 15.12.2014
- Plastics Processing
An Economic Assessment Study of Low Carbon Vehicles in March 2013 set out by experts from consulting firms Cambridge Econometric and Ricardo - AEA, and commissioned by the Nissan Group, European Association of Automotive Suppliers, General Electric, European Trade Union Federation of Industry All...
-
Types of conductive thermoplastics - replacement of metallic materials in engineering structures, part 4
- 03.11.2014
- Plastics Processing
In the last section, we will discuss the magnetic properties of thermoplastics and draw...
-
Types of conductive thermoplastics - replacement of metallic materials in engineering structures, part 3.
- 27.10.2014
- Plastics Processing
Heat conductive thermoplastics are used in the construction of various devices, most car lighting systems, LED lighting, cooling systems, and the like. are replaced by aluminum and its...
-
Types of conductive thermoplastics - replacement of metallic materials in engineering structures, Part 2
- 20.10.2014
- Plastics Processing
The main way to increase the thermal conductivity of polymeric materials is the way of composite materials with the appropriate polymer matrix and a suitable conductive...
-
Types of conductive thermoplastics - replacement of metallic materials in engineering structures, Part 1
- 13.10.2014
- Plastics Processing
The structures of various machinery and equipment, including means of transport most commonly found with metal...
-
Thermoplastic Foam Injection Molding
- 08.09.2014
- Plastics Processing
Savings in weight and material, dimensional stability plus higher productivity are aspects that fire the imagination of developers. All the more surprising is the fact that injection molding specialists have dealt with the physical foaming of thermoplastics rather hesitantly in the past. Especially...
-
IRISA celebrates 60 years of existence
- 06.08.2014
- Plastics Processing
Plastic molding in Irisa has been working for 60 years. What was worth the plastics industry in the birth of Irisa How to molding the team developed what preceded and what was his path to...
-
New trends in injection molding after the K 2013, Part 3
- 30.07.2014
- Plastics Processing
The main directions of innovation are, logically, focused on reducing costs while ensuring the increased quality parameters of injection. This applies even for moderate injection molds, which can access the system, especially in serial production, generate significant savings, even in combination...
-
New trends in injection molding after the K 2013, Part 2
- 23.07.2014
- Plastics Processing
At K 2013, on newsstands European manufacturers of injection molding machines, the term "European" is not a guarantee that the machines or their parts have been produced in Europe are discovering all the three ways to drive injection molding machines. For these manufacturers, machine drive...
-
New trends in injection molding after the K 2013, Part 1
- 16.07.2014
- Plastics Processing
The world's largest trade fair focused on the production and use of plastics and rubber K 2013 (The word Kunststoff-plastic), held a three-year periodicity in Düsseldorf, Germany, in October last year celebrated 60 years of its existence. The first edition was held in 1963 under the slogan "Wunder...
-
CzechTech China Center opened in Suzhou
- 09.07.2014
- Plastics Processing
Czech business delegation led by Minister of Industry and Trade Jan Mladek went to ten million ancient city of Suzhou, which was once the capital cities of China. The morning meeting was performed with Shanghai mayor for the economy and local...
Latest Classifieds
Cooperation: Free production capacity on injection molding and extrusion line
04.04.2024 | ID: 202418891
Top AdvertFor Sale: Original granulates LDPE, HDPE, PE, PP, PET
26.07.2022 | ID: 20229168
Top Advert-
10.05.2024 | ID: 202419128
-
10.05.2024 | ID: 202419127
-
09.05.2024 | ID: 202419125
-
09.05.2024 | ID: 202419124
-
09.05.2024 | ID: 202419123
To purchase: PA 6/66 GF 30 regrind
07.05.2024 | ID: 202419102
To purchase: LDPE Regranulate light
07.05.2024 | ID: 202419101
To purchase: Package quality LDPE film. 500 t/month
06.05.2024 | ID: 202419090
To purchase: Dirty granulates from ground
06.05.2024 | ID: 202419088
-
26.04.2024 | ID: 202419032
To purchase: PPSU regrind banner
17.04.2024 | ID: 202418988
To purchase: POM C regrind colour, white, natur
17.04.2024 | ID: 202418986
For Sale: Original granulates LDPE, HDPE, PE, PP, PET
26.07.2022 | ID: 20229168
Top Advert-
10.05.2024 | ID: 202419128
-
10.05.2024 | ID: 202419127
-
09.05.2024 | ID: 202419125
-
09.05.2024 | ID: 202419124
-
09.05.2024 | ID: 202419123
-
09.05.2024 | ID: 202419122
Upcoming Events
13.05.2024 - 17.05.2024 | München
14.05.2024 - 17.05.2024 | Jönköping
14.05.2024 - 16.05.2024 | Rheda-Wiedenbrück
Romexpo Metalshow TIB- Bucharest 2024
14.05.2024 - 17.05.2024 | Bukurešť
15.05.2024 - 18.05.2024 | Bangkok
MSV Nitra 2024, International Engineering Fair Nitra
21.05.2024 - 24.05.2024 | Nitra
21.05.2024 - 24.05.2024 | Kielce
International Technics Fair 2024
21.05.2024 - 24.05.2024 | Belehrad
28.05.2024 - 07.06.2024 | Düsseldorf
13.05.2024
14.05.2024
14.05.2024
Romexpo Metalshow TIB- Bucharest 2024
14.05.2024
15.05.2024
15.05.2024
16.05.2024
16.05.2024
Plastic Injection Molding Seminar for Technologists and Adjusters I
20.05.2024
20.05.2024
Job offers
Sales representative - sales specialist - Plastcom, spol. s r.o.
09.05.2024
Senior CNC milling machine in piece production - Branson Ultrasonics, a.s.
09.05.2024
Injection molding adjuster - BOURBON AP Nitra, s.r.o.
09.05.2024
Tooling Leader - Xinquan Slovakia Automotive Trim s.r.o.
29.04.2024
Moulding Machines Setter - Tristone Flowtech Slovakia s.r.o.
11.04.2024
Plastic worker, gluing staff - FORM s.r.o.
10.04.2024
Logistics, warehouse and shipping supervisor - KNP s.r.o.
09.04.2024
Warehouseman - AIS Automotive Interior Systems Slovakia s.r.o.
09.04.2024
Maintenance and operation of the production line - Plastcom, spol. s r.o.
04.04.2024