Composites - Current News Articles
Articles on Composites. Daily updated information and news from the plastics industry.
-
ML Polyolefins with an award for regranulate with rubber filling
- 22.08.2022
- Suppliers of raw materials
- Composites
- Awards
During the International Fair for Plastics and Rubber Processing PLASTPOL, the winners of competition for the best products were presented. The award in the category ‘Plastics Processing Technologies’ went to ML Polyolefins together with partners: Bydgoszcz Industrial Cluster Tool Valley, Bydgoszcz...
-
Ensinger takes over the StyLight product - the production of thermoplastic composites from INEOS Styrolution
- 06.07.2022
- Suppliers of raw materials
- Composites
Ensinger and INEOS Styrolution have announced a joint agreement under which Ensinger acquired INLOS Styrolution from StyLight company, which manufactures thermoplastic...
-
Ensinger now also manufactures organosheets
Ensinger is expanding his portfolio in the field of thermoplastic composite materials. The technology (DBP) was recently put into operation at the production plant in Cham. This system makes it possible to efficiently produce a wide range of fiber-reinforced thermoplastic...
-
A revolution among decorative finishing materials - Rocko Tiles Wall System
Waterproof, large-format wall panels (4x1230x2800mm) Rocko Tiles are a real revolution between finishing and decorative materials. Large-format wall cladding in exclusive decors (up to 23 decors), which perfectly imitate wood, concrete or marble, can be used from the living room, kitchen or...
-
Thermoplastic composites: Ensinger commissions new prepreg facility
- 15.10.2020
- Machinery & Equipment
- Composites
Since 1966, Ensinger has been active in the field of engineering polymers. Today, the corporate group’s range of products and services covers the entire value added chain – from compounding and extrusion, injection moulding and stock shapes through to finished...
Extending the product range company ECTA Handelsgesellschaft GmbH
- 18.07.2019
- Latest News
- Composites
ECTA Handelsgesellschaft GmbH has expanded its product...
-
The FRIMO Group has successfully presented at JEC World 2018 in Paris
- 08.06.2018
- Machinery & Equipment
- Automotive
- Composites
This year, the JEC World Fair was again presented as the world's leading composite trade fair. More than 1300 exhibitors with about 42,500 visitors from 115 countries this year were very...
-
LANXESS at Fakuma: Focus on new forms of mobility
Specialty chemicals company LANXESS will primarily focus on the sustainable in-vehicle applications of its thermoplastics during its appearance at the Fakuma trade...
-
LANXESS subsidiary presents large-area structural part in thin-wall design
- 01.08.2017
- Suppliers of raw materials
- Composites
With the help of continuous-fiber-reinforced, semi-finished thermoplastic composites, structural parts with a large surface area can be designed to be very thin and therefore lightweight. They can also be equipped with numerous functions, as demonstrated by a new module rack, only one millimeter...
Ensinger acquires Swiss composite specialist
- 09.06.2017
- Latest News
- Composites
Finished parts from carbon reinforced thermoplastics open up a new business...
-
A new generation of composite materials improves the economics of enterprise
- 19.09.2016
- Suppliers of raw materials
- Composites
Development of composites mainly focuses on the materials which can be processed easily and quickly. Just such a resin material is a new generation of ASSET. Processing utility and value improves the standard properties of thermoset and cheaper...
-
Call for lightweight construction in 2025
Composites have long found only in low series of specific segments such as eg. The aerospace industry and the production of racing cars. Their use is currently significantly accelerated the trend of electric cars and the overall focus on lightweight construction. They set up new targets for the...
-
Composites with thermoplastic matrix and automotive, Part 5
- 12.01.2015
- Plastics Processing
- Automotive
- Composites
Dry granulation - in hygroscopic matrices and reinforcing fillers is necessary before the injection process technology operations include drying the granules. Of course, the granules supplied from the manufacturer in a dry state, this operation is omitted. But always be dried granules uneaten after...
-
Composites with thermoplastic matrix and automotive, Part 4
- 05.01.2015
- Plastics Processing
- Automotive
- Composites
Abrasiveness, increased injection pressure - of course also affect the design of injection molds for processing composites LFT, especially the selection of appropriate materials, shapes and forms part of the dimension in terms of...
Latest Classifieds
-
31.10.2022 | ID: 202216215
Top Advert For Sale: Original grade of LDPE, HDPE, PE, PP, PET
26.07.2021 | ID: 20219168
Top AdvertFor Sale: Regrind PC/ABS, ABS, PC, PC+GF30, PPS
30.01.2023 | ID: 202316470
For Sale: Twin-screw compounding/regranulation line
30.01.2023 | ID: 202316469
-
30.01.2023 | ID: 202316467
For Sale: PP-COPO white regranulate
30.01.2023 | ID: 202316466
For Sale: PET flakes color mix
30.01.2023 | ID: 202316465
To purchase: Regrind - ABS, PC/ABS, PC, PA - Filled und Unfilled
30.01.2023 | ID: 202316464
-
30.01.2023 | ID: 202316463
-
27.01.2023 | ID: 202316457
To purchase: HDPE canister/drums/IBC bales
25.01.2023 | ID: 202316452
To purchase: Regrind - ABS, PC/ABS, PC, PA - Filled und Unfilled
23.01.2023 | ID: 202316445
-
23.01.2023 | ID: 202316441
To purchase: PP regrind gray, white
20.01.2023 | ID: 202316435
-
31.10.2022 | ID: 202216215
Top Advert For Sale: Original grade of LDPE, HDPE, PE, PP, PET
26.07.2021 | ID: 20219168
Top AdvertFor Sale: Regrind PC/ABS, ABS, PC, PC+GF30, PPS
30.01.2023 | ID: 202316470
For Sale: Twin-screw compounding/regranulation line
30.01.2023 | ID: 202316469
-
30.01.2023 | ID: 202316467
For Sale: PP-COPO white regranulate
30.01.2023 | ID: 202316466
For Sale: PET flakes color mix
30.01.2023 | ID: 202316465
Upcoming Events
01.02.2023 - 05.02.2023 | New Delhi
01.02.2023 - 02.02.2023 | Paríž
07.02.2023 - 09.02.2023 | Monterrey
07.02.2023 - 09.02.2023 | Brno
07.02.2023 - 09.02.2023 | Anaheim
08.02.2023 - 10.02.2023 | Varšava
08.02.2023 - 11.02.2023 | Bratislava
15.02.2023 - 16.02.2023 | Birmingham
International Plastic Industry IPF
22.02.2023 - 25.02.2023 | Dhaka
01.02.2023
01.02.2023
07.02.2023
07.02.2023
07.02.2023
26.01.2023
06.02.2023
2. Optimization of the injection process
07.02.2023
13.02.2023
NX Mechatronics Concept Designer
14.02.2023
Job offers
-
30.01.2023
Injection molding maintenance - VÚSAPL, a.s.
27.01.2023
Master of Vocational Training - ESOX-PLAST s.r.o.
23.01.2023
Service technician for fiber lasers - Narran s.r.o.
19.01.2023
Obchodního zástupce - VH-FB EURO, s.r.o
18.01.2023
Plastic injection technologist - AIS Automotive Interior Systems Slovakia s.r.o.
18.01.2023
Designer of tools - Branson Ultrasonics, a.s.
16.01.2023
Moulding Machines Setter - Boge Elastmetall Slovakia, a.s.
10.01.2023
Sorter of injection molding machines - machine adjuster ESOX-PLAST s.r.o.
10.01.2023
Branch Dictionary
