Dispensing tips for industrial applications from Flumasys – dispense with precision

Dispensing Tip – a Small Part That Influences the Final Result

A dispensing tip is a replaceable end piece of a dispensing system. Adhesive, sealant or paste is applied directly to the product through its opening. It helps deliver the material to the required location and form a dot, line or strip. Tips vary in shape, length, opening diameter and material. The choice depends on what you are applying and the result you need to achieve.

What Should You Clarify Before Selecting a Dispensing Tip?

Before making your selection, clarify what material you will apply, in what quantity and to which location. 

Answer These Questions When Making Your Selection:

• What material are you dispensing? A low-viscosity adhesive, a thick sealant or a paste containing fillers? Its properties determine the appropriate tip type and opening diameter.
• What do you want to create? A small dot, a thin line or a wide strip? Select the tip according to the required quantity and shape of the deposit.
• Is the application site easily accessible? A longer, bent or flexible tip may be needed for deep grooves or behind the edge of a part.
• What dispensing equipment do you use? The tip must have a compatible connection.

Verify your final choice by testing it with your material and equipment. Then monitor application accuracy, the uniformity and repeatability of dispensed quantities, and any dripping or clogging.

Consumables for Precision Dispensing from Flumasys

Proper dispensing requires more than the right tip. Material reservoirs, connections and other accessories are also important. Flumasys supplies consumables for dispensing one-component materials as well as for mixing and applying two-component compounds.

The Range Includes:

• Dispensing needles and tips for applying adhesives, sealants and pastes.
• Barrels, pistons and adapters for holding and dispensing material.
• Static mixers for dispensing two-component materials.
• Cartridges and their holders – retainers for dispensing assemblies.

The range is complemented by solder pastes, fluxes and thermally conductive pastes.

Flumasys will help you make your selection. Simply specify what you are applying, which dispenser you use and what you need to improve. This could include, for example, uneven dispensed quantities, frequent tip clogging or poor access to the application site.