Maintenance of injection molds - Current News Articles
Articles on Maintenance of injection molds. Daily updated information and news from the plastics industry.
-
ALFA CHROM servis s.r.o.: Your Partner for repairs and modifications of moulds and machine parts
- 17.04.2024
- Plastics Moulds
- Maintenance of injection molds
In 1991 ALFA CHROM servis s.r.o. was established to provide excellent services in the field of electroplating. We started with hard chrome coatings on moulds and machine parts, but over time we found that our skills and technological knowledge could serve other...
-
Expansion of PANAS Tools s.r.o. portfolio with TRUTHREAD calibers
- 12.02.2024
- Plastics Moulds
- Maintenance of injection molds
PANAS Tools s.r.o. has started a new cooperation with the world-renowned caliper manufacturer TRUTHREAD, which, with its more than 40 years of experience on the market, offers the production and supply of the most extensive range of threaded and smooth...
-
News from the world of industrial chemistry from Spectra
- 18.12.2023
- Plastics Moulds
- Maintenance of injection molds
The offer of industrial chemistry from the Czech company Spectra has been expanded by several useful novelties, which we will present to you in this...
-
ALFA CHROM servis invests in the future: expanded production facilities and new Demag cranes
- 15.02.2023
- Plastics Moulds
- Maintenance of injection molds
"Demag cranes are our investment for the future," says Aleš Koutný, CEO of ALFA CHROM servis. The company ALFA CHROM servis, which mainly deals with the repair of molds for the automotive industry, has doubled its production facilities over the past year and equipped them with a pair of new Demag...
ALFA CHROM servis s.r.o. gets your injection molds back into the mold
- 11.08.2022
- Latest News
- Maintenance of injection molds
The company ALFA CHROM servis s.r.o. was established in 1991 as an electroplating plant, in which we mainly made hard chrome coatings on molds and later on other machine parts. During these processes, there was often a need to address local repairs and dimensional corrections of many parts, not...
Do you need mold service? Contact Šlechta a.s.
The company Šlechta a.s. provides repairs and complete service of production molds. It will take care of all the work that will keep your molds long-lasting, save you premature investment in new equipment and allow you to keep production with minimal...
-
Efficient and accurate production of parts from plastics and other materials
- 16.11.2021
- Plastics Moulds
- Maintenance of injection molds
Do you machine aluminum, PVC, acrylic, Plexiglass, HPL boards, composites, GRP, CFRP, Dibond, Alucobond, Honeycomb, Styrodur, Phenolic, Texolite, foams and...
-
Multifunctional ultrasonic polisher for 100 + 1 surfaces - JAN SVOBODA s.r.o.
TTP400 significantly facilitates the machining of molds after welding. Compared to manual polishing, working time is reduced by up to 80%. Furthermore, it is possible to perform EDM erosion of shapes without the need for a depth and...
-
Quick-action clamping systems for STRACK molds from VMM
- 20.10.2020
- Plastics Moulds
- Maintenance of injection molds
- Cost savings
- Injection molds
- Injection molding machines
Our innovative solution to reduce set-up costs and to increase flexibility due to fast and easy tool change on your injection moulding machine. The proven mechanical tool quick clamping system for injection moulding tools from STRACK NORMA is suited for two- and four bar versions of all...
-
Complex care of plastic injection molds from Formy Tachov s.r.o.
Mission Formy Tachov s.r.o. is to participate and assist customers in the smooth, efficient and highly economical production of plastic products. The company offers innovative development, design, production and service of plastic injection molds. The strategy of the company is to offer, develop...
Separators, lubricants, cleaning and control products from UNLIMITED TECHNOLOGY
UNLIMITED TECHNOLOGY sells top quality QQ products for mold maintenance and molding, for the electrical and mechanical engineering...
-
Cleaning unit for mold cooling circuits from ALFA CHROM servis s.r.o.
- 11.11.2019
- Plastics Moulds
- Maintenance of injection molds
The aim of the company is to provide complete services in the field of preparation of molds for production, so-called pre-production service, regular planned mold service, repairs of dividing planes, painting, dimensional correction of deformations, modifications, polishing of shaped parts under...
UNLIMITED TECHNOLOGY sells products for mold maintenance and plastic molding
Business Strategy of Unlimited Technology s.r.o. is not to compete with large competing resellers in sales volumes but to focus on the high quality of the products and the flexibility to meet customer...
-
Interview with Aleš Koutný from ALFA CHROM servis s.r.o.
- 12.04.2018
- Services
- Interview
- Maintenance of injection molds
ALFA CHROM Service s.r.o. in Bruntál Moravian-Silesian repairs damaged shapes of molds, cylinders, cylinders and other mechanical parts and provides complete services in the preparation of molds for production for a wide range of customers not only in the Czech...
Šlechta a.s. your partner in polishing and service injection molds for more than 20 years
The company of Šlechta a.s. from Jindřichův Hradec is a leader in the engineering field of injection molds. In more than 20 years of our market experience, our specialists have developed their own methods and practices, and today we are among best companies in Europe...
-
Lubomír Zeman: Operation, maintenance and repair of injection molds, Part 4.
- 08.02.2018
- Plastics Moulds
- Maintenance of injection molds
Continuation of Article p. Lubomir Zeman dated...
-
Lubomír Zeman: Operation, maintenance and repair of injection molds, Part 3.
- 01.02.2018
- Plastics Moulds
- Maintenance of injection molds
Continuation of Article p. Lubomir Zeman dated...
-
Lubomír Zeman: Operation, maintenance and repair of injection molds, Part 2.
- 25.01.2018
- Plastics Moulds
- Maintenance of injection molds
Continuation of Article p. Lubomir Zeman dated...
-
Lubomír Zeman: Operation, maintenance and repair of injection molds Part 1.
- 18.01.2018
- Plastics Moulds
- Maintenance of injection molds
For the correct operation of the injection molds, including the economic aspect, it is necessary to ensure optimal operating conditions and conditions for its use in production.Certain robustness of injection molds due to their stiffness requirements may cause less sensitive access to them....
-
Do you need a partner to service, modify, or repair a mold? Complex mold service is provided by ALFA CHROM servis s.r.o.
- 07.08.2017
- Plastics Moulds
- Maintenance of injection molds
The company ALFA CHROM servis s.r.o. from Bruntál has many years of experience in repairing moulds for injection molding. It originated in 1991 as a galvanizing plant in which hardcore molds were made, and later on other machine parts. During these processes, there has often been an urgent need to...
-
Company BOCO PARDUBICE presents new hydraulic molds opener
Hydraulic molds opener suitable for plastic processors that has a lack production capacity and where is frequent exchange of injection molds and wherever it is necessary to implement the molds service, such as conservation, cleaning, repair and so...
-
Try SMED analysis by Stäubli Systems
Based on our long experience in optimizing production technologies not only in the plastics industry is pleased to offer advanced technological support for increasing the productivity of your manufacturing...
-
The cleaning unit cooling circuits forms from Alfa Chrom s.r.o.
- 21.10.2015
- Plastics Moulds
- Maintenance of injection molds
The device is a compact unit serving as a reservoir for the chemical own assets, holding tank, pipes, stainless steel ball valves, stainless steel Heating element and the sensor, and a digital thermostat stainless steel pump, larger aggregates of a frequency converter for speed control of the...
ALFA CHROM servis s.r.o. - repairs of damaged moulds
- 02.09.2015
- Latest News
- Maintenance of injection molds
We provide repairs damaged molds, matched and scraped mold separation plane, and...
Latest Classifieds
-
16.05.2024 | ID: 202419161
Top Advert -
03.05.2024 | ID: 202419068
Top Advert Cooperation: Plastic injection - free production capacity
20.02.2023 | ID: 202316585
Top AdvertTo purchase: We are looking for regrinds and plastics producion waste
12.06.2024 | ID: 202419347
For Sale: TECHNIL A218 V25 black
12.06.2024 | ID: 202419346
-
11.06.2024 | ID: 202419344
-
10.06.2024 | ID: 202419342
-
16.05.2024 | ID: 202419161
Top Advert To purchase: We are looking for regrinds and plastics producion waste
12.06.2024 | ID: 202419347
To purchase: Package quality LDPE film. 500 t/month
10.06.2024 | ID: 202419334
To purchase: Dirty granulates from ground
10.06.2024 | ID: 202419331
To purchase: PA 6/66 GF 30 regrind
10.06.2024 | ID: 202419313
To purchase: PA 6/66 GF 30 regrind
03.06.2024 | ID: 202419277
To purchase: Production of rubber or plastic gears
27.05.2024 | ID: 202419255
-
03.05.2024 | ID: 202419068
Top Advert For Sale: TECHNIL A218 V25 black
12.06.2024 | ID: 202419346
-
11.06.2024 | ID: 202419344
-
10.06.2024 | ID: 202419342
-
10.06.2024 | ID: 202419341
For Sale: PA 6.6 Ultramid A3U42G6 grind
10.06.2024 | ID: 202419340
For Sale: Color Masterbatches on LLDPE carrier
10.06.2024 | ID: 202419339
Upcoming Events
18.06.2024 - 20.06.2024 | Stuttgart
Electric and Hybrid Vehicle Technology Expo 2024
18.06.2024 - 20.06.2024 | Stuttgart
19.06.2024 - 22.06.2024 | Bangkok
Plastics Recycling Show Europe 2024
19.06.2024 - 20.06.2024 | Amsterdam
26.06.2024 - 28.06.2024 | Sao Paulo
26.06.2024 - 28.06.2024 | Almaty
01.07.2024 - 04.07.2024 | Nürnberg
11.07.2024 - 13.07.2024 | Kuala Lumpur
17.07.2024 - 19.07.2024 | Beijing
12.06.2024
14.06.2024
18.06.2024
Electric and Hybrid Vehicle Technology Expo 2024
18.06.2024
19.06.2024
12.06.2024
12.06.2024
Information systems and software solutions in logistics
13.06.2024
24.06.2024
28.06.2024
Job offers
-
12.06.2024
Project engineer with English or German language - Branson Ultrasonics, a.s.
11.06.2024
Sales representative for the Czech Republic - GRAFE Polymer Solutions GmbH
10.06.2024
Warehouse worker - ENVI-RECYCLING PLAST, s. r. o.
10.06.2024
Commercial/technical representative of professional tools (all Slovakia) - ant s.r.o.
05.06.2024
Commercial/technical representative of professional tools (all Slovakia) - ant s.r.o.
05.06.2024
-
03.06.2024
Production operator - inspection of plastic products - ESOX-PLAST s.r.o.
03.06.2024
Warehouse worker - ENVI-RECYCLING PLAST, s. r. o.
03.06.2024