Current News Articles - page 42
Daily updated information and news from the plastics industry.
-
ColorSave - keep the costs of additional materials under control
- 17.10.2017
- Machinery & Equipment
- Dosing equipment
- Peripherals
ColorSave 1000 is the latest generation of masterbatche gravimetric dosing for press mills. It is the patented system of the Israeli company LIAD, which has an internal weighing hopper that provides high resistance to mechanical shocks and...
-
Arburg: 63 new trainees - more than ever before
- 16.10.2017
- Machinery & Equipment
- Industry 4.0
For more than 65 years, Arburg has been helping young people to launch their careers. With a total of 63 new trainees and students of the Baden-Württemberg Cooperative State University (DHBW), who started on 4 September, this year marks an unprecedented number. Speaking on behalf of the Partners,...
-
Keep up with the PENTA - servis spol. s r.o.
- 13.10.2017
- Machinery & Equipment
- Packaging
Nowadays, no one is surprised to see in the production or the production of a banding or packing technique that will end up with a job that only a few years ago was only for the...
-
Radiation crosslinking - an innovative way to improve the tribological properties of plastic products
- 11.10.2017
- Plastics Processing
- Radiation technologies
The requirements for plastic parts, especially their tribological properties, are constantly increasing. This applies in particular to plastics used in machinery and other equipment and exposed to high loads. At the same time, the topic of replacing metals in light constructions is becoming...
-
Pavel Polomský from Piovan: We are specialists in system solutions
- 10.10.2017
- Machinery & Equipment
- Peripherals
- Interview
Piovan has been operating in the plastic sector for 50 years. In the last ten years, the company has become a multinational organization with manufacturing facilities in Italy, Brazil, China and the USA, with its own 21 branches, with sales offices in more than 70 countries and with 950...
-
GRAFE presents at the FAKUMA: Technical Plastics
Customers - and premium quality customized technical plastics – are what the GRAFE Group stands for. For more than 25 years, the plastics specialist GRAFE has been manufacturing products for the domestic and international markets. The company will be presenting its product portfolio, including...
-
Slovnaft brings to the motorists a new portfolio of fuels with improved properties
- 08.10.2017
- Suppliers of raw materials
Slovnaft introduces a new portfolio of high-quality fuels into its network of petrol stations, which clean the engine and protect it from...
-
Report from the 7th Seminar on the Trends in the Plastics Industry
- 07.10.2017
- Services
- Events
- Photo reportage
The seminar was organized by the Slovak Plastic Cluster in cooperation with the Slovak Chamber of Commerce and Industry. It was held at the International Hotel at the end of September in the beautiful scenery of Veľká Lomnica. It was focused on material and technology innovation in the plastics...
-
Polykemi AB: Compounds from three different worlds – Technical plastics – High-performance plastics – Recyclates
At its exhibition stand this year, the global manufacturer of technical thermoplastic compounds, Polykemi AB, based in Ystad, Sweden, is focusing on blends, high-performance plastics PPA GF and high-tech polypropylene for lightweight construction as well as highlighting increasingly important...
-
FAKUMA 2017: VELOX presents the largest, high-performance raw materials and solutions
VELOX GmbH, a leading pan-European distributor of raw material specialities for the plastics industry, will be presenting an innovative product range at FAKUMA (booth 5001 in Hall B5), which will be held in Friedrichshafen from 17 to 21 October. In addition to its partner products, VELOX is also...
-
Moisture Meter by Moretto: the 4.0 drying revolution
- 04.10.2017
- Machinery & Equipment
- Quality control
Moisture Meter, in-line resin moisture analyzer, verifies the residual granule moisture content in few seconds and allows to certify the polymer quality before...
-
LANXESS at Fakuma: Focus on new forms of mobility
Specialty chemicals company LANXESS will primarily focus on the sustainable in-vehicle applications of its thermoplastics during its appearance at the Fakuma trade...
-
Fakuma 2017: ENGEL e-mac series expanded on the upper end
- 02.10.2017
- Machinery & Equipment
- Injection molding machines
Fast, precise, energy efficient and available at an attractive price. With this range of characteristics, ENGEL AUSTRIA’s all-electric injection moulding machines from the e-mac series have become very well established, especially in the teletronics and technical moulding industries. For Fakuma...
-
Successful duo BOY at MSV 2017 fair in Brno
- 29.09.2017
- Machinery & Equipment
- Injection molding machines
At the International Engineering Fair in Brno, Czech republic (October 9 - 13, 2017), BOY will present two injection molding machines. The compact BOY XS with a clamping force of 100 kN produces small plastic parts for the electronic industry and BOY 25 E VV (clamping force 250 kN) is the head of...
-
Conference MOLDS, MACHINES, MATERIALS on current topics in the plastics processing industry
- 28.09.2017
- Services
- Events
- Photo reportage
The Expert Conference for Plastic Processors about novelties in the field of Molds, Machines, Materials and Their Application in Practice took place in the days of 13-14. September 2017 with the support of recognized experts and university educators in the pleasant enviroment of Jehla Hotel in Žďár...
-
The new Technology Center of the KUBOUŠEK Group has grown in South Bohemian metropolis
KUBOUŠEK Group is one of the leading suppliers of injection molding machines and peripheral equipment in the plastics processing industry, measuring instruments and systems. The breakthrough in the new supply assurance of the production process by the KUBOUŠEK Group takes place in September 2017 by...
-
Fakuma 2017: Smart, smarter, Arburg!
Arburg is presenting "smart" machines, processes and turnkey solutions for efficient plastics processing in Hall A3, Stand 3101, at the Fakuma 2017. After Arburg heralded the future of injection moulding at the K 2016 with the world premiere of the large hybrid Allrounder 1120 H, the next step now...
-
Automation Division of Mapro Group has had a record year
- 25.09.2017
- Machinery & Equipment
- Automation
Automation division of Mapro Group ended the year 2016 with a record turnover of 5.75 mil. EUR. These great results are also reflected in 2017 and have a major impact on the development of the automation division at Mapro...
-
LASTIC - Laser solution for plastics from LASCAM systems
- 22.09.2017
- Machinery & Equipment
- Lasers
Quality requirements in the field of plastic molding are rapidly increasing and the mechanical separation of plastics in many cases does not meet the requirements of end customers. This is why LASCAM systems developed a contactless laser system at the instigation of injection molding manufacturers...
-
Effective production planning and management in piece production with MES Proleis
- 21.09.2017
- Services
- Software for industry
- Cost savings
Tebis offers comprehensive data management, production planning and production management using the Proleis production information system developed by the German ID Company (Ingenieurgesellschaft für Datentechnik). Proleis enables efficient purchasing, production planning and control of all...
-
WITTMANN BATTENFELD with sophisticated injection molding technology at the Fakuma 2017
Under the motto “be smart”, WITTMANN BATTENFELD will present to interested trade visitors top-level injection molding technology from 17 to 24 October in hall B1, booth 1204 at this year’s Fakuma in...
-
HACO SLOVAKIA, s r.o. presents a new modern ventilation system
- 19.09.2017
- Plastics and Rubber products
- Plastic products
Since 1994 HACO, s.r.o. has been producing high-quality products for ventilating homes that are internationally recognized. The exclusive distributor of these products on the Slovak market is the subsidiary HACO SLOVAKIA, s.r.o., which introduces a range of modern ventilation...
-
BOY exhibits 14 Injection Moulding Machines at the Fakuma
- 18.09.2017
- Machinery & Equipment
- Injection molding machines
With a record participation BOY will contribute to the success of the 25th Fakuma, which will take place from the 17th to the 21st October 2017. With a total of 14 BOY exhibits – a number that has never been exhibited before in Friedrichshafen – the manufacturer of Injection Moulding Machines with...
-
Remiva group is again exhibiting this year, with colleagues from Sysmetric
- 15.09.2017
- Suppliers of raw materials
- Events
- Dosing equipment
For our company Remiva is 2017 a key year. As we have already informed you about new types of materials several times during this year, we are bringing news now. As the exclusive representative of Sysmetric for the Czech and Slovak Republics, we invite you to the international trade fair in Brno,...
-
X-Comb mini dryer: specific for medical industry
X-Comb is the Moretto’s newest mini dryer for treating small batches of technical materials. Developed respecting the technological standard of all Moretto’s products, the X-Comb dryer has been designed specifically to meet the stringent requirements of the medical...
-
HAYEUR and DATRIA – inovative and verified path to the success
- 12.09.2017
- Machinery & Equipment
- Peripherals
Company HAYEUR has allowed us to look into the future in the production of screws, barrels and equipment for plastic technologies and therefore we know that it is one of the largest and most modern plants in the...
-
HRSflow at MSV Brno 2017: Hot runner solutions for complex challenges
- 11.09.2017
- Plastics Moulds
- Injection molding
- Exhibitions
Highlights at HRSflow’s booth at MSV Brno 2017 will include the new range of space-saving Full Compact Nozzles, the servo driven FLEXflow One hot runner technology which – set by an External Smart Interface – does not require an additional control unit, as well as newly developed Pressure Block...
-
Injection molding machines HAITIAN Jupiter from MAPRO have met the expectations of the IAC Group
- 07.09.2017
- Machinery & Equipment
- Injection molding machines
The IAC Group is one of the world's leading automotive interior suppliers. Globally, the company employs approximately 32,000 people in more than 100 facilities in 22 countries. We talked to plant manager Jan Vondráček and head of the injection molding department Ladislav Vítů from the IAC...
-
Arburg at the MSV 2017: high performance for the optical industry and additive functional parts
The MSV 2017 in Brno is the most important industry event in the Czech republic and Slovakia. Arburg will be demonstrating two sophisticated applications for production-efficient plastic processing there in Hall G1, Stand 39 from 9 to 13 October: an electric injection moulding machine from the...
-
Measurement of color and gloss of thermoplastic moldings, part 2
- 04.09.2017
- Services
- Quality control
Continuation of the article from p. Lubomir Zeman dated...
Latest Classifieds
-
16.05.2024 | ID: 202419161
Top Advert -
03.05.2024 | ID: 202419068
Top Advert Cooperation: Plastic injection - free production capacity
20.02.2023 | ID: 202316585
Top AdvertFor Sale: Original granulates LDPE, HDPE, PE, PP, PET
26.07.2022 | ID: 20229168
Top Advert-
07.06.2024 | ID: 202419311
For Sale: Recycled LDPE granules
07.06.2024 | ID: 202419310
For Sale: Regrind from PP palette
06.06.2024 | ID: 202419307
-
16.05.2024 | ID: 202419161
Top Advert To purchase: Package quality LDPE film. 500 t/month
03.06.2024 | ID: 202419291
To purchase: Dirty granulates from ground
03.06.2024 | ID: 202419289
To purchase: PA 6/66 GF 30 regrind
03.06.2024 | ID: 202419277
To purchase: Production of rubber or plastic gears
27.05.2024 | ID: 202419255
To purchase: PA 6/66 GF 30 regrind
27.05.2024 | ID: 202419228
To purchase: Regrinds and plastics producion waste
21.05.2024 | ID: 202419222
-
03.05.2024 | ID: 202419068
Top Advert For Sale: Original granulates LDPE, HDPE, PE, PP, PET
26.07.2022 | ID: 20229168
Top Advert-
07.06.2024 | ID: 202419311
For Sale: Recycled LDPE granules
07.06.2024 | ID: 202419310
For Sale: Regrind from PP palette
06.06.2024 | ID: 202419307
For Sale: PUR regrind (yellow, red blue) - extrusion
06.06.2024 | ID: 202419306
-
06.06.2024 | ID: 202419305
Upcoming Events
11.06.2024 - 14.06.2024 | Mexico City
11.06.2024 - 13.06.2024 | Norimberg
12.06.2024 - 14.06.2024 | Ho Chi Minh City
14.06.2024 - 17.06.2024 | Chennai
18.06.2024 - 20.06.2024 | Stuttgart
Electric and Hybrid Vehicle Technology Expo 2024
18.06.2024 - 20.06.2024 | Stuttgart
19.06.2024 - 22.06.2024 | Bangkok
Plastics Recycling Show Europe 2024
19.06.2024 - 20.06.2024 | Amsterdam
26.06.2024 - 28.06.2024 | Sao Paulo
04.06.2024
04.06.2024
04.06.2024
04.06.2024
05.06.2024
Job offers
Commercial/technical representative of professional tools (all Slovakia) - ant s.r.o.
05.06.2024
Commercial/technical representative of professional tools (all Slovakia) - ant s.r.o.
05.06.2024
-
03.06.2024
Production operator - inspection of plastic products - ESOX-PLAST s.r.o.
03.06.2024
Warehouse worker - ENVI-RECYCLING PLAST, s. r. o.
03.06.2024
Plastic injection analyst analyst - Smartplast s.r.o.
29.05.2024
Quality controller - ULSTRUP PLAST s.r.o.
17.05.2024
Presser - DIXI, production of plastic packaging a.s.
17.05.2024
Supplier development specialist - HYDAC Electronic, s.r.o.
13.05.2024