Testpolymer EU s.r.o.

Bohuslavice 123, 798 56 Bohuslavice u Konice    Show on Map

telephone:+420 731 657 460

NIP: 29211506
VAT: CZ29211506

Company Description

Accredited testing laboratory No. 1595 accredited according to ČSN EN ISO 17025:2005 performs testing of plastics, especially plastic mechanical tests (tensile and bending tests, melt flow rate MFR / MVR, impact strength and Izod notched, Vicat softening temperature, HDT, hardness Shore. ..).

Certificates

EN ISO/IEC 17025

Range of products / Services

Services

 

 

 

Accredited tests

 

Name of test

Standard/method

Name of standard

1.Melt flow rate of thermoplasticsČSN EN ISO 1133-1
ČSN EN ISO 1133-2
Plastics – Determination of the melt mass–flow rate (MFR) and the melt volume–flow rate (MVR) of thermoplastics – Part 1: Standard method, Part 2: Methods for materials sensitive to
time–temperature history and/or moisture
2.Density of non-cellural plastics by immersion methodČSN EN ISO 1183-,1
method A
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method
3.Charpy unnotched impact strength 23 °C, -10 up to -50 °C
Charpy notched impact strength 23 °C, -10 up to -50 °C
ČSN EN ISO 179-1Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
4.Tensile properties (strength, tensile modulus, strain at break,…) -50 up to 300 °CČSN EN ISO 527-1
ČSN EN ISO 527-2
Plastics – Determination of tensile properties - Part 1: General principles, Part 2: Test conditions for moulding and extrusion plastics
5.Flexural properties (flexural strength, flexural stress at conventional deflection, flexural modulus, flexural strain at flexural strength...) -50 up to 300 °CČSN EN ISO 178Plastics - Determination of flexural properties
6.Izod unnotched impact strength 23 °C, -10 up to -50 °C
Izod notched impact strength 23 °C, -10 up to -50 °C
ČSN EN ISO 180Plastics - Determination of Izod impact strength
7.Vicat softening temperature (VST)ČSN EN ISO 306Plastics - Thermoplastic materials - Determination of Vicat
softening temperature (VST)
8.Temperature of deflection under loadČSN EN ISO 75-1
ČSN EN ISO 75-2
Plastics - Determination of temperature of deflection under load - Part 1: General test method, Part 2: Plastics, ebonite and long-fibre-reinforced composites
9.Shore hardness A, DČSN EN ISO 868Plastics and ebonite – Determination of indentation hardness
by means of a durometer (Shore hardness)
10.Determination of water content - coulometric methodČSN EN ISO 15512,
method B2
Plastics – Determination of water content
11.Determination of the textile glass and mineral filler content - calcination methodČSN EN ISO 1172Textile–glass–reinforced plastics – Prepregs, moulding compounds and laminates – Determination of the textile–glass and mineral–filler content – Calcination methods
12.Determination of ash content by direct annealingČSN EN ISO 3451-1,
ISO 3451-2,
ČSN EN ISO 3451-4
Plastics - Determination of ash - Part 1: General methods, Part 2: Poly(alkylene terephthalate) materials, Part 4: Polyamides
13.Determination of viscosity numberČSN EN ISO 307Plastics – Polyamides – Determination of viscosity number
14.Determination of burning rateČSN ISO 3795
DIN 75200
FMVSS 302
TL1010
DBL 5307.10 art. 5.1
VCS 5031,19 except
art. S4
Determination of burning behaviour of interior materials
15.Horizontal and vertical flame testsUL 94
ČSN EN 60695-11-10 ed.2
Tests for flammability of Plastic materials for Parts in Devices and Appliances
16.Determination of thermal properties (glass transition, melting and crystallization) by DSCČSN EN ISO 11357-1,-2,-3Plastics – Differential scanning calorimetry (DSC) – Part 1: General principles, Part 2: determination of glass transition temperature and glass transition step height, Part 3: Determination of temperature and enthalpy of melting and crystallization
17.Determination of hardness - ball indentation methodČSN EN ISO 2039-1Plastics, Determination of hardness – Part 1: Ball indentation method
18.Determination of gloss value - method of measuring directionally reflected lightČSN EN ISO 2813Paints and varnishes – Determination of gloss value at 20 degrees, 60 degrees and 85 degrees
19.Artificial accelerated aging testingČSN EN ISO 4892–2Plastics – Methods of exposure to laboratory light sources – Part 2: Xenon–arc sources
PV 1303Non-Metallic Materials - Xenon Arc Light Aging of Vehicle Interior Components
PV 3929Non–Metallic Materials, Weathering in Dry, Hot Climate (Exterior)
PV 3930Non-Metallic Materials, Weathering in Humid, Hot Climate (Exterior)
VDA 75202:2001Test for color fastness and ageing using xenon lamps at high temperatures
ČSN EN ISO 105–B06Textiles – Tests for colour fastness – Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
ČSN EN 20105-A02Textiles - Tests for colour fastness. Part A02: Grey scale for assessing change in colour
ČSN EN ISO 105-A05Textiles - Tests for colour fastness - Part A05: Instrumental assessment of change in colour for determination of grey scale rating
20.Determination of color changes - colorimetric methodDIN 53236Testing of colouring materials; conditions of measurement and evaluation for the determination of colour differences for paint coatings, similar coatings and plastics
VW 50190Vehicle Interior Equipment Components Measurement-Based Evaluation of Color and Gloss Level
VW 50195, method AColorimetric Evaluation of Automobile Paint Coatings
ISO 7724-3: 1984Paints and varnishes - Colorimetry - Part 3: Calculation of colour differences

Non-accredited tests

 Name of testStandard/methodName of standard
1.Moisture content in plastics17025-PP-11Determination of moisture content using halogen moisture analyzer
Application methods Mettler–Toledo: Determination of moisture content in plastics
2.Colour shade (for example L*, a*,b*)17025-PP-10Determination of colour shade using d/8° and 0/45° spectrophotometers
3.Identification of plastics by FT-IR spectroscopy17025-PP-14Identification of plastics on FT-IR spectrometer with single reflection ATR adapter
4.Compressibility of rubber sealELE 8102 AP (B)Determination of rubber seal compressibility
5.Thermogravimetric analysis (TGA)ČSN EN ISO 11358-1Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles
6.TGA/FT-IR analysis17025-PP-32Thermogravimetric analysis combined with FT-IR spectroscopy
7.Determination of apparent density of material that can be poured from a specified funnelČSN EN ISO 60Plastics - Determination of apparent density of material thatcan be poured from a specified funnel
8.Determination of certain substances by X-ray fluorescence spectroscopy (XRF)17025-PP-39Screening - Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry
9.Hot resistance test without external mechanical stressingDIN 53497Hot storage test on mouldings made of thermoplastic moulding materials without external mechanical stressing
10.Cold resistance test without external mechanical stressing17025-PP-36Cold resistance test on mouldings made of thermoplastic moulding materials without external mechanical stressing
11.Melt flow rate of thermoplasticsASTM D 1238Standard test method for melt flow rates of thermoplastics by extrusion plastometer
12.Tensile properties (strength, tensile modulus, strain at break,…) -50 °C up to 300 °CČSN ISO 37Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
DIN 53504Testing of rubber - Determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test
JIS K 6251Rubber, vulcanized or thermoplastics - Determination of tensile stress-strain properties
13.Shore hardness A, DJIS K 6253-3Rubber, vulcanized or thermoplastic - determination of hardness - Part3: Durometer method
ČSN ISO 7619-1Rubber, vulcanized or thermoplastic - Determination of indentation
hardness - Part 1: Durometer method (Shore hardness)
14.Determination of burning rateASTM D5132
GS 97038
Determination of burning behaviour of interior materials

 

Downloads

Pictures

Others Categories, where company is listed (7)

Promote your company!

Add your business to the plastic and rubber catalog in the Czech Republic and Slovakia. Your business will see more than 35,000 real users per month

+ Add company
 

Latest Classifieds

Upcoming Events

Branch Dictionary