Current News Articles
Daily updated information and news from the plastics industry.
-
Feasibility study and manufacture of injection molded thermoplastics, part 3
- 29.12.2016
- Plastics Processing
Continuation of the article p. Lubomir Zeman dated December 22,...
-
PF 2017
To all our readers and business partners we appreciate your cooperation in the past year and the new year good luck, health, personal and professional...
-
Feasibility study and manufacture of injection molded thermoplastics, Part 2
- 22.12.2016
- Plastics Processing
Continuation of the article p. Lubomir Zeman dated December 15,...
-
Preparing for Industrial Fairs Prague 2017 - be there!
- 21.12.2016
- Services
Becoming a tradition, the second week of May is held an exhibition at the PVA EXPO PRAHA for the products, machines and latest technology in mechanical engineering, logistics and energy. On 9 to 12 May 2017, will be held Industrial Fairs Prague and organizers for exhibitors and visitors are already...
-
Apparatus for testing the integrity of surface offers TITAN Multiplast s.r.o.
- 20.12.2016
- Machinery & Equipment
- Quality control
Apparatus from british company Buckleys can be successfully used for the control membrane, membrane film to the bridge structure, the insulating film, but also the weld or controlling the...
-
Not be afraid of Lean Administration and Master study FAQ
- 19.12.2016
- Services
- Cost savings
In February opens IPA Slovakia second year of Master study lean administration. Some questions about the course and the schedule of prospective students are repeated, so the author decided to write this article. The questions are divided into three areas. Perhaps the answer will also help you in...
-
Feasibility study and manufacture of injection molded thermoplastics, Part 1
- 15.12.2016
- Plastics Processing
Injection molding has long been the most widely used technologies for the production of plastic parts for all industries. Its meaning and application is constantly increasing, mainly related to the development of the automotive industry, electronics, telecommunications technology, the production of...
-
Anti-draft curtains of soft PVC from TITAN - Tatraplast Ltd.
The striped curtains of soft PVC are used as anti-draft curtains, reducing heat loss in winter, limiting the leakage of cold from the freezer cabinets, preventing dust entering to the building and can serve as an additional source of...
-
GF Machining Solutions: Cut your work pieces faster than your competitors!
- 12.12.2016
- Machinery & Equipment
- Peripherals
The new electro-wire cutting machines labeled CUT E350 and CUT E600 are designed to significantly increase production capacity while maintaining the quality requirements of the areas cultivated. Technology oriented for cutting speed are now more productive and deliver customer financial...
-
MALOUN s.r.o. company expand production of granulates
- 08.12.2016
- Plastics recycling
- Recycled plastics
Regranulates production of standard quality raw materials is one of the priorities of capacity utilization regranulation lines in the company MALOUN sro in Zlin. Direct treatment or by adding a percentage (15-35%) granulate is a real saving on material inputs (costs) of conservation of mechanical...
-
The countdown to reduce the use of plastic bags has started!
- 07.12.2016
- Plastics packaging
- Waste Management
In view of tackling resource waste and littering, EU governments have until 27 November 2016 to adopt measures to cut the consumption of lightweight plastic carrier bags, and inform the European Commission about it. This is required by the EU Plastic Bags Directive. It obliges Member States to...
-
Report of the sixth year of the seminar Trends in the plastics industry
- 06.12.2016
- Services
Slovak plastics cluster (SPK) organized seminar of the trends in the plastics industry on 5th December 2016 in Nitra. The participants acquired knowledge of the latest technology of plastics processing and new practical information related to the tools, moulds and...
-
The Jupiter II from Haitian has proven its value
- 05.12.2016
- Machinery & Equipment
As a T1 supplier, Reydel Automotive Slovakia s.r.o. specializes in high-quality interior components, mainly for cockpits. Their production range extends from instrument panels to ventilation systems and even door trim. We spoke with Milan Veèera, Manufacturing Manager at Reydel in Nitra,...
-
Company BOCO PARDUBICE presents new hydraulic molds opener
Hydraulic molds opener suitable for plastic processors that has a lack production capacity and where is frequent exchange of injection molds and wherever it is necessary to implement the molds service, such as conservation, cleaning, repair and so...
-
The GRAFE GROUP has developed halogen-free, flame-retardant polypropylene compounds
The plastics experts at GRAFE are introducing a halogen flame retardant PP compound, which can be colored as desired. "Our goal was to develop a material that offers halogen-free, flame-retardant and good mechanical properties along with good flowability and the possibility of free coloration,"...
-
K 2016: a resounding success for ENGEL
Thanks to a wealth of innovation, a positive climate for investment and enthu-siastic attendees, the K 2016 fair was a resounding success for ENGEL AUSTRIA. inject 4.0 – ENGEL’s answer to the challenges of the fourth industrial revolution – played a key role in this achievement. Furthermore, topics...
-
Special offer strapping machines by Penta - Service
- 24.11.2016
- Machinery & Equipment
- Packaging
From 22nd November to 31st December 2016 you can buy selected strapping machines at great...
-
World premiere at the K 2016: Hybrid Allrounder with a clamping force of 6,500 kN
- 22.11.2016
- Machinery & Equipment
- Injection molding machines
Arburg has pulled off an unprecedented and unique triple coup at the K 2016 with the world premiere of the hybrid Allrounder 1120 H – a new machine size in a new design with the new Gestica control...
-
Ter Hell Plastics - The project technology initiative with long fibers thermoPRE® Chemnitz University of Technology
- 21.11.2016
- Plastics Processing
Sample device for producing thermoplastic fiber-reinforced prepregs, which was developed regional development center thermoPRE® enters the trial...
-
Synventive Announces the SVG+, the New Standard for Sequential Valve Gate Molding
- 16.11.2016
- Plastics Moulds
- Hot runners
SVG+ systems boast the latest patented hot runner advancements, providing the optimum and most reliable molding solution for large part...
-
The awards in the National prices for the quality of SR 2016 and SR National Award for Corporate Social Responsibility 2016
The second week of the November each year is declared by the European Organisation for Quality as an European quality week, when attention in all European countries draws on various events and conferences in the field of quality. To this tradition was for several years and connects the Slovak...
-
MOL Group announced its financial and operational targets for 2017-2021
- 14.11.2016
- Suppliers of raw materials
- Business economics
After publication of the strategy "MOL Group 2030 - Enter Tomorrow " Today MOL Group announced its financial and operational targets for the next five...
-
Vent valve SGD - increased economic success of projects
- 10.11.2016
- Plastics Processing
- Peripherals
The new generation of bleed valves SGD delivers innovative possibilities for building and maintaining an older system efficiency at Ecovent venting...
-
Paul Soviš of VECTARY: 3D modeling we want to make available to the masses
- 08.11.2016
- Services
- 3D technology
An interesting interview with Paul Soviš of the company CTO, which talk about Slovak project...
-
Directly managed threading units in manufacturing conveyors and the compression of waste
- 07.11.2016
- Plastics Moulds
- Automation
- Conveyors
- Peripherals
Company E - Normalie servis s.r.o. has 10 years experience in the production of threading...
-
Photo gallery from the K 2016 in Düsseldorf, part 2.
- 03.11.2016
- Services
- Photo reportage
- K Show
Exhibitors from around the world had been preparing for the K 2016 trade fair for months to be able to face international competition for their convincing innovations. In the first part of the article we approached news of machinery and equipment producers for the plastics industry. In the second...
-
Sorting the beans at the stand Jelinek-Trading wanted to try everybody
- 02.11.2016
- Machinery & Equipment
Quality is always first, no one wants to offer scrap, agreed visitors booth Jelinek-Trading at the Brno MSV. The greatest interest was thus a new optical sorter from...
-
MOL Group's Board approved a long-term strategy of the company
- 31.10.2016
- Services
- Business economics
Entitled "The MOL Group 2030" approved by the Board of MOL Group on 13 October 2016 a new long-term strategy of the...
-
A new era of robotics with Stäubli
- 28.10.2016
- Machinery & Equipment
- Robotics
World industrial robotics is undoubtedly changing. IoT, Industry 4.0, cooperation of robots with human - with what solution Stäubli comes in response to these current megatrends? To what extent then these trends reflect the new range of robots and how TX2 indicate a new direction for the future?...
-
JSW - Fully electric injection molding machines
- 27.10.2016
- Machinery & Equipment
- Injection molding machines
Modern trends generally in the machine is fully electric machine. This also applies to the injection molding machine. It is in this time when there is a fleet renewal mills and most economically successful choosing fully electric injection molding machines. Among those in great demand, particularly...
Latest Classifieds
-
31.10.2022 | ID: 202216215
Top Advert To purchase: Company - plastic injection
21.03.2023 | ID: 202316727
For Sale: Injection molding (Engel, Krauss Maffei) - 1000-2300 tons
21.03.2023 | ID: 202316726
For Sale: PA 66 - Lubricomp RX85514 NC
21.03.2023 | ID: 202316725
To purchase: PMMA, POM, PC plastic waste
21.03.2023 | ID: 202316724
-
20.03.2023 | ID: 202316720
For Sale: PP-COPO white regranulate
20.03.2023 | ID: 202316719
To purchase: Company - plastic injection
21.03.2023 | ID: 202316727
To purchase: PMMA, POM, PC plastic waste
21.03.2023 | ID: 202316724
-
20.03.2023 | ID: 202316720
To purchase: Regrind - ABS, PC/ABS, PC, PA - Filled und Unfilled
20.03.2023 | ID: 202316718
To purchase: PE films - /municipal
20.03.2023 | ID: 202316711
To purchase: ASA , ABS , PC/ABS
15.03.2023 | ID: 202316694
To purchase: PC GF , PC FR , PC Al
15.03.2023 | ID: 202316693
-
31.10.2022 | ID: 202216215
Top Advert For Sale: Injection molding (Engel, Krauss Maffei) - 1000-2300 tons
21.03.2023 | ID: 202316726
For Sale: PA 66 - Lubricomp RX85514 NC
21.03.2023 | ID: 202316725
For Sale: PP-COPO white regranulate
20.03.2023 | ID: 202316719
For Sale: PET flakes color mix
20.03.2023 | ID: 202316716
For Sale: Color Masterbatches, 100t
20.03.2023 | ID: 202316715
For Sale: Moisture absorber (Desiccant) 100 t every month
20.03.2023 | ID: 202316714
Upcoming Events
22.03.2023 - 23.03.2023 | Paríž
22.03.2023 - 25.03.2023 | Bratislava
27.03.2023 - 31.03.2023 | Sao Paulo
28.03.2023 - 30.03.2023 | Nuremberg
28.03.2023 - 30.03.2023 | Lagos
29.03.2023 - 31.03.2023 | Guadalajara
29.03.2023 - 31.03.2023 | Bologna
29.03.2023 - 30.03.2023 | Dortmund
29.03.2023 - 30.03.2023 | Dortmund
21.03.2023
21.03.2023
21.03.2023
22.03.2023
22.03.2023
20.03.2023
Forum of practical maintenance
21.03.2023
23.03.2023
Electrical injection molding with FANUC ROBOSHOT
23.03.2023
Injection molding technology I.
28.03.2023
Job offers
Chemical production operator - SLOVNAFT, a.s.
20.03.2023
Turner+CNC/toolmaker 1-shift operation COURBIS Smart Polymers s.r.o
17.03.2023
Automation dealer (Morava region) - ENGEL CZ s.r.o.
14.03.2023
Dealer of injection molding machines - ENGEL CZ s.r.o.
14.03.2023
Service technician - ENGEL CZ s.r.o.
14.03.2023
Quality manager - ESOX-PLAST s.r.o.
09.03.2023
Plastic injection technologist - AIS Automotive Interior Systems Slovakia s.r.o.
09.03.2023
Operator, manipulator - J.P. PLAST Slovakia spol. s r.o.
07.03.2023
Storekeeper - EXPLAST Slovensko, s.r.o.
02.03.2023
Branch Dictionary
