Letter from the Minister: Major projects to improve environmental quality
The Ministry of Environment in Slovakia is currently developing a draft Operational Programme Environment Quality.
Ide o programový dokument SR pre čerpanie pomoci zo štrukturálnych fondov EÚ a Kohézneho fondu v programovom období 2014 – 2020 v oblasti udržateľného a efektívneho využívania prírodných zdrojov, zabezpečujúceho ochranu životného prostredia, aktívnu adaptáciu na zmeny klímy a podporu energeticky efektívneho nízkouhlíkového hospodárstva. Stratégia OP KŽP a vymedzenie jeho cieľov a aktivít bolo stanovené v súlade so stratégiou Európa 2020, ako aj legislatívou EÚ v oblasti životného prostredia a energetiky a zároveň sa brali do úvahy aj potreby na národnej a regionálnej úrovni s ohľadom na využívanie prírodných zdrojov. Podrobnejšie informácie o zameraní programu sú v prehľade prioritných osí a hlavných typov aktivít programu.
 |
| Ing. Peter Žiga, PhD. |
Súčasťou operačného programu KŽP má byť aj zoznam veľkých projektov, ktorých implementácia je plánovaná počas programového obdobia. Za veľký projekt je považovaný projekt s celkovými oprávnenými nákladmi presahujúcimi 50 000 000 Eur (bez DPH).
Minister životného prostredia SR, Peter Žiga, požiadal, vo svojom liste, organizácie, ktoré tvoria Pracovnú skupinu pre prípravu OP KŽP, o informáciu o plánovaných projektoch, ktoré patria do tejto skupiny. V prípade, že vo vašom okolí viete o takomto projekte, ktorý existuje alebo sa plánuje, prosím, kontaktujte nás a my Vám radi poskytneme bližšie informácie. Formulár pre veľké projekty nájdete TU »
Celé znenie listu ministra TU »
Zväz automobilového priemyslu Slovenskej republiky
Tomášikova 26
821 01 Bratislava
Slovenská republika
www.zapsr.sk
- autor:
- ZAP SR
You might also be interested
-
Production of stretch films - custom stretch films from PENTA - servis spol. s.r.o.
- 10.05.2021
- Plastics packaging
- Plastic packaging
We offer manual and machine stretch films tailored to specific requirements. Choose the roll, color, width and thickness of the stretch film yourself and we will make it for...
-
Innovated products in the air conditioning section by FORT - PLASTY s.r.o.
- 06.05.2021
- Plastics and Rubber products
- Plastic products
As part of the continuous development and improvement of products, the company FORT-PLASTY s.r.o. in addition to the standard offer of air-conditioning elements in this period, it focused on the innovation of four products, namely suction frames, plenum boxes, swirl diffusers and pool...
-
3D printing and injection molding - hand in hand in modern manufacturing
- 05.05.2021
- Services
- 3D technology
At the beginning of 3D printing, it looked like this technology would not be able to compete with plastic injection anywhere, but the development of this technology ensured that 3D printing is not only competitive and low cost, but also that it can go hand in hand with plastic...
-
Polykemi Inc opens own plant in Gastonia, North Carolina
- 04.05.2021
- Suppliers of raw materials
- Business economics
Polykemi Group is investing almost 10 million Euro in its own plant in the United States. That is the greatest single investment in the Group’s history. The goal is to launch production of plastic compounds as early as...
-
Simulation technology not only for the plastics industry
- 03.05.2021
- Services
- Injection simulation
- Software
Simulations and computer technology in general using computer resources have been helping to save money in the development of new products for a long time, practically more than half a century. Recently, however, from the originally only verification phase of product design, simulations have been...
-
Addiplast acquires a colouring unit from Toyo Ink
The specialist in technical polymers for the plastics industry, based in Haute-Loire, close to Lyon, in France, is taking over the business of the Japanese company Toyo Ink Europe Speciality Chemicals, located in the Oise...
-
Linaset a.s: New production capacity for plastic injection
Linaset Company offers top production capacity in one of the most modern plastic injection services in Czech Republic. The new production hall was put into operation in 2018 and expanded the existing production capacities of the Bruntál...
-
Transparent plastic screens in the food industry from Portaflex s.r.o.
- 27.04.2021
- Plastics and Rubber products
- Plastic products
The technology of processing food raw materials is changing at a dizzying pace today. The products have been handled for an incomparably longer time than before, they are being imported from increasingly remote areas. Therefore, hygienic requirements are logically...
-
New SAF technology from Stratasys for mass production of 3D printing is coming to the market
- 26.04.2021
- Machinery & Equipment
- 3D technology
Selective Absorption Fusion technology will be the basis of the new 3D printers of the H series from Stratasys, which are distributed by MCAE Systems. Stratasys is thus entering the growing market of 3D printed parts for high-volume...
-
Updated MOL 2030 strategy: The MOL Group will focus on sustainable business and carbon neutrality
The Board reviewed and approved the update of the "MOL Group 2030+" long-term strategy - originally published in October 2016 - which is fully integrated with the new sustainability strategy and complemented by a long-term vision and ambitions beyond...
