Plastics and Rubber products - Current News Articles
Articles on Plastics and Rubber products. Daily updated information and news from the plastics industry.
-
What are the advantages of plastics?
- 09.12.2022
- Plastics and Rubber products
- Plastic products
We have prepared several examples of the use of plastics for you. They show that modern materials, including plastics, can help us save energy and ensure sustainable...
-
Plastic windows and doors are high quality and elegant
- 02.12.2022
- Plastics and Rubber products
- Plastic products
The time when customers chose plastic windows just because they were the cheapest is over. They choose today's plastic windows mainly because of their excellent properties, led by long service life, excellent thermal insulation parameters and elegant...
-
Up to half of the heat escapes through the old windows!
- 15.11.2022
- Plastics and Rubber products
- Plastic products
The heating season can easily last 9 months in the coldest regions of Slovakia, and energy prices are still rising, so more and more people are looking for ways to save on heating expenses. If you live in an apartment or house that is equipped with older windows, you can start right...
-
Large-format windows can safely carry a high-quality class A window profile
- 02.11.2022
- Plastics and Rubber products
- Plastic products
The share of glazed areas in family houses is growing from year to year. This is not surprising, as large areas look stylish, provide daylighting of the house and their benefit is a great...
-
VEKA FSP WinDoPlan – the perfect tool for designing windows and doors
- 26.08.2022
- Plastics and Rubber products
- Plastic products
Spoločnosť VEKA, výrobca plastových okenných a dverových profilov najvyššej triedy A, vytvorila pre svojich partnerov profesionálny online nástroj pre podrobný návrh okien a dverí, vrátane všetkých certifikátov a tvorby dokumentácie pre obchodné ponuky a výberové...
-
TITAN - Tatraplast: Hollow polycarbonate sheet Akyver reduces thermal radiation by up to 65%
The new treatment of the HEATSTOP Silver top layer will limit the penetration of solar energy into the shaded area. This will result in a significant reduction in the heating of closed spaces and the temperature of shielded materials in the open...
-
The heat also "attacks" through the windows. Do you know how to protect your home from the sun?
- 20.07.2022
- Plastics and Rubber products
- Plastic products
A home bathed in sunlight is the wish of each of us, but this joy also has its dark side. The direct summer sun very often causes excessive heating of the room and it also creates unpleasant glare when working from home. How to effectively defend yourself against high summer temperatures and...
-
Polycarbonate EZ Glaze from TITAN-Tatraplast s.r.o. suitable for sheds or pergolas
Full Polycarbonate EZ-Glaze 60 is a polycarbonate sheet with UV stabilization, specially developed for simple and quick roofing of sheds, pergolas, car...
-
Should we invest for window profiles in class A?
- 28.06.2022
- Plastics and Rubber products
- Plastic products
Spring also brings with it a lively construction industry in the form of the start of new constructions and also reconstructions. Replacing and installing windows is one of the most common construction tasks. However, it does not matter which window you choose. With plastic windows, you will come...
-
Curtains and tarpaulins (not only) for welding boxes from Portaflex s.r.o.
- 22.06.2022
- Plastics and Rubber products
- Plastic products
The products represent a barrier against harmful radiation, are a quick solution for the separation of welding and grinding workplaces and are suitable for delimiting work surfaces. These screens protect not only the worker but also other people around the workplace. At the same time, they help the...
-
Modular system of raised flower beds made of recycled plastic from ESOX, spol. s.r.o.
ESOX, spol. s.r.o., a manufacturer of high-quality plastic products and injection molds, presents its new product Laanik. Thanks to the Laanik modular system, you can assemble a decorative raised flower bed, vegetable garden or sandpit for...
-
Letting the engine breathe properly - LANXESS
Polybutylene-terephthalate (PBT)-based compounds that offer not only high hydrolysis stability in hot and humid conditions but also good laser transparency for laser transmission welding are a...
-
NonOilen: Fully decomposable 3D printer filament from Fillamentum Manufacturing Czech s.r.o.
The Czech manufacturer of filaments for 3D printers produces its first 100% biodegradable material, NonOilen. Once an item is printed with NonOilen at the end of its life cycle, it does not have to be thrown in the trash. All you have to do is send it back to Fillamentum for recycling, or break it...
-
When it is not raining or dripping - water tanks from the company Sady s.r.o.
- 14.02.2022
- Plastics and Rubber products
- Plastic products
Príroda sa s nami každodenne delí o svoje bohatstvá. V pôde pestujeme plodiny, ktoré sú potravou nielen pre ľudstvo, ale aj pre ostatné živočíchy. Človek bez vody neprežije viac, ako tri dni. Globálne otepľovanie každoročne spôsobuje deficit a úbytok vodných plôch po celom svete. Dážď je preto...
-
Is the noise from the street obstructing you? Maybe it's time to replace the windows!
- 11.02.2022
- Plastics and Rubber products
- Plastic products
One of the most important features of windows, which is often forgotten, is their ability to insulate noise. If you have a house surrounded by a garden, far from any road or railway, you do not have to deal with noise problems. However, if you live in dense urban development, pay...
-
Convert your single-use wooden pallets to durable high-performance plastic!
- 24.01.2022
- Plastics and Rubber products
- Plastic products
It’s never been more important for the commercial supply chain to up its game in terms of sustainability, transparency and performance – which makes it an ideal time to explore the advantages of durable plastic transit...
Latest Classifieds
-
03.05.2024 | ID: 202419068
Top Advert Cooperation: Free production capacity on injection molding and extrusion line
04.04.2024 | ID: 202418891
Top AdvertFor Sale: Plastic crates and pallets
22.05.2024 | ID: 202419223
To purchase: We are looking for regrinds and plastics producion waste
21.05.2024 | ID: 202419222
-
21.05.2024 | ID: 202419221
-
21.05.2024 | ID: 202419220
-
21.05.2024 | ID: 202419219
To purchase: We are looking for regrinds and plastics producion waste
21.05.2024 | ID: 202419222
-
21.05.2024 | ID: 202419220
-
21.05.2024 | ID: 202419217
To purchase: PC/ABS automotive
21.05.2024 | ID: 202419216
-
21.05.2024 | ID: 202419215
-
21.05.2024 | ID: 202419214
-
21.05.2024 | ID: 202419213
-
03.05.2024 | ID: 202419068
Top Advert For Sale: Plastic crates and pallets
22.05.2024 | ID: 202419223
-
21.05.2024 | ID: 202419221
-
21.05.2024 | ID: 202419219
-
21.05.2024 | ID: 202419218
-
20.05.2024 | ID: 202419210
For Sale: PA 6.6 Ultramid A3U42G6 grind
20.05.2024 | ID: 202419209
Upcoming Events
28.05.2024 - 07.06.2024 | Düsseldorf
28.05.2024 - 30.05.2024 | Kyiv
04.06.2024 - 07.06.2024 | Wels
04.06.2024 - 07.06.2024 | Lyon
04.06.2024 - 06.06.2024 | Štuttgart
04.06.2024 - 07.06.2024 | Buenos Aires
05.06.2024 - 08.06.2024 | Shanghai
05.06.2024 - 08.06.2024 | Hanoi
11.06.2024 - 14.06.2024 | Mexico City
MSV Nitra 2024, International Engineering Fair Nitra
21.05.2024
21.05.2024
International Technics Fair 2024
21.05.2024
28.05.2024
28.05.2024
Plastic Injection Molding Seminar for Technologists and Adjusters I
20.05.2024
20.05.2024
20th Seminar - Injection Moulding
21.05.2024
22.05.2024
Seminar on plastic injection for technologists and adjusters II
22.05.2024
Job offers
Quality controller - ULSTRUP PLAST s.r.o.
17.05.2024
Presser - DIXI, production of plastic packaging a.s.
17.05.2024
Supplier development specialist - HYDAC Electronic, s.r.o.
13.05.2024
Sales representative - sales specialist - Plastcom, spol. s r.o.
09.05.2024
Senior CNC milling machine in piece production - Branson Ultrasonics, a.s.
09.05.2024
Injection molding adjuster - BOURBON AP Nitra, s.r.o.
09.05.2024
Tooling Leader - Xinquan Slovakia Automotive Trim s.r.o.
29.04.2024
Moulding Machines Setter - Tristone Flowtech Slovakia s.r.o.
11.04.2024
Plastic worker, gluing staff - FORM s.r.o.
10.04.2024