Plastics production
Classifieds for plastics and rubber goods, raw material and machinery. Add your advertisement.
-
Cooperation : Free production capacities on injection molding machines 2 x 130T
- 08.03.2024
- ID: 202418750
We offer free production capacity on 2 new 130T injection molding machines Advantages: fast, cost-effective and accurate production We are based in Ústí nad Labem. https://www.vstrikolisovna.cz/
- Ondřej Suchý - E-Mail: info@vstrikolisovna.cz / 778059298
-
Cooperation : Gravity casting - small series production
- 04.03.2024
- ID: 202418711
We offer manual custom manufacturing using polyurethane two-component casting systems. In this way, for example, electronic components can be cast or water- and dust-tight electronic products can be manufactured directly.
- Martin Lukášek - E-Mail: lukasek@gamatec.cz / +420778966783
-
Cooperation : Production and assembly of technical moldings
- 20.02.2024
- ID: 202418659
We offer production and assembly of precise and technical moldings (linear bearing cages, sliding bushings, sliding stones, gears, guide pulleys...).
Our machine park includes 6 machines, closing force 500-1500 kN, injected volume 2-100 cm.
We are looking for new customers for long-term cooperation.
We are a family-type company founded in 2003.- ŠANDOR, s.r.o. | Pavol Šandor - E-Mail: sandor@sandor.sk / 0905419468
-
Cooperation : Free production capacities on injection molding machines
- 12.02.2024
- ID: 202418608
We offer part of the free production capacity on injection molding machines with a tonnage of 950T and 1300Ton
- František Hlavatý - E-Mail: frantisek.hlavaty@introplast.sk / +421 903 556 305
-
Cooperation : Plastic injection - free production capacity
- 31.01.2024
- ID: 202418527
We are looking for new partners for cooperation who would use our free capacities.We have machines available:Engel Victory 500/110Billion H470/140Billion H1300/320Closing force from 110 to 320 t.Contact: Paolo FortunaMobile: +421 908 048 460Email: paolo@fortunaslovakia.skFORTUNA SLOVAKIA sroTovárenská 1479 956 18Bošany ICO: 36311189 VAT number: SK2020139858
- Paolo Fortuna - E-Mail: paolo@fortunaslovakia.sk / +421 908 048 460
-
Cooperation : Free production capacities on the KraussMaffei KM 950-6100 press
- 16.01.2024
- ID: 202418414
We would like to establish cooperation with new partners who would use our free capacities for the relocation of molds on the KraussMaffei KM 950-6100 machine.
At the same time, we also free up capacity on smaller machines from 50t to 630t or 950t, which may be the subject of further discussion.
If you are interested in our services, do not hesitate to contact us.
Ing. František Hlavatý
+421 903 556 305
frantisek.hlavaty@introplast.skIntroplast a.s.
+421 34 658 2113
introplast@introplast.sk
www.introplast.sk- INTROPLAST, a.s. | plastplastic - E-Mail: plastplastic@azet.sk / 0908227504
-
Cooperation : Plastic injection - free production capacity
- 04.12.2023
- ID: 202318219
We offer the possibility of using our modern injection molding machines for the production of plastic moldings.
We specialize in pressing parts of various sizes from very small to large.
The displacements of 13 of our injection engines range from 214 to 2354 cc.
We produce high-precision moldings with excellent quality.
We have in operation machines with a closing force of 1200, 1600, 1700, 3200, 5500 kN.
We will also ensure the maintenance and repairs of your molds.
We can assemble, pack and deliver the products to the destination according to your preferences.
Contact in case of interest Plast Brno Pavel Bartoš mobile: 732 301 459 email: pavel.bartos@plastbrno.cz -
Cooperation : Plastic injection - free production capacity
- 21.11.2023
- ID: 202318146
We offer the possibility of using our modern injection molding machines for the production of plastic moldings.
We specialize in pressing parts of various sizes from very small to large.
The displacements of 13 of our injection engines range from 214 to 2354 cc.
We produce high-precision moldings with excellent quality.
We have in operation machines with a closing force of 1200, 1600, 1700, 3200, 5500 kN.
We will also ensure the maintenance and repairs of your molds.
We can assemble, pack and deliver the products to the destination according to your preferences.
Contact in case of interest Plast Brno Pavel Bartoš mobile: 732 301 459 email: pavel.bartos@plastbrno.cz- David Rudyk - E-Mail: technik.vyroby@plastbrno.cz / 737243060
-
Cooperation : Free capacities for technical products
- 07.11.2023
- ID: 202318068
We offer free capacities for production of technical plastic products on electric injection molding machines TOYO 100, TOYO 180 and Mitsubishi 280.
- Elektroplast výrobné družstvo Prešov | Miroslav Karabínoš - E-Mail: karabinos@elektroplast.sk / 0903 437 339
-
Cooperation : Blow moulding
- 08.09.2023
- ID: 202317665
For our new projects and further cooperation, we are looking (prioritarily in Slovakia) for a company operating in the field of plastic blowing.
The condition is "Production in a controlled zone - ISO Class 8".
For more information, please contact: Mr. Ing. Michal Hrinda, phone: +421 902 944 784, or: hmi@knudsen-plast.dk- Knudsen Plast, s.r.o. | Gabriel Kačo - E-Mail: gka@knudsen-plast.dk / +421 902 944 759
-
Cooperation : Free production capacities - KMS-PT, s.r.o.
- 16.08.2023
- ID: 202317553
Free production capacities - We can produce anything
Repair, production and service of molds
Custom production - from 1000 pcs
Custom forms- Ján Puskar - E-Mail: Janikpuskar@gmail.com / +421950890165
-
Cooperation : Plastic injection - free production capacity
- 02.05.2023
- ID: 202316933
We currently offer free production capacity for small-batch injection molding using your molds and a maximum molding volume of up to 75 cm3. It is a vertical injection press BOY 35 E VV with a semi-automatic mode that allows manual picking and loading. In the press, it is possible to inject various metal or plastic semi-finished products inserted into molds. We ensure assembly and completion of products according to your requirements. We also offer manual custom production using polyurethane two-component casting systems. In this way, it is possible, for example, to pot electronic components or directly produce waterproof and dustproof electronic products.
- Martin Lukášek - E-Mail: lukasek@gamatec.cz / +420778966783
-
Cooperation : Plastic injection - free production capacity
- 03.04.2023
- ID: 202316781
We would like to offer you free capacities of our injection molding plant.
The plastic molding plant has 13 injection molding machines with a closing force of 250 - 2000 kN, which are equipped with control systems EC 80 or EC 100 with the possibility of printing PT protocols.
The accessory of the injection molding machine is the Colortronic dyeing device.
The device is used for mixing the basic plastic material with dye and subsequent dosing (via a conveyor) into the injection molding machine.
Other accessories of injection molding machines are tempering devices Witmann, Regloplas 90, TOOL-TEMP (TT156E, TT157E) and cooling device TOOL-TEMP (TT9500, TT11000).
The complete production of plastic parts is ensured, from drawing documentation, through construction, production and testing of molds, production of samples to serial production of moldings with subsequent maintenance of molds.
Do not hesitate to contact us with a non-binding inquiry.- Martina Obadalová - E-Mail: marketing@obzor.cz / +420 577 195 122
-
Cooperation : Plastic injection - free production capacity
- 20.02.2023
- ID: 202316585
Dear Business Partners,
allow us to introduce you to the production possibilities of our family-owned Czech company, which has been operating in the plastics industry for more than two decades.
At the same time, we would like to offer you the possibility of manufacturing plastic parts on our modern injection machines.We focus on the injection molding of small and very small parts. The maximum volume of the injected dose is 150 cc.
We can produce highly dimensionally precise technical parts in excellent quality.
We inject all common types of materials, including high-temperature materials such as PEEK.Technical moldings made of thermoplastic elastomers, especially TPU, are abundantly represented in our portfolio.
Even small-volume orders, or production in semi-automatic mode with an operator, are not a problem.
We have nine injection molding machines in operation with a closing force of 35 to 80 t.
We take great pride in ensuring that our machines are always in excellent condition. For this purpose, we regularly modernize and service our machine park.
You can be sure that we will not manufacture your parts on machines that are unable to maintain the same set parameters in each cycle. In our production, you will only find injection molding machines from the leading European manufacturers Engel and Arburg.We can inject either using your molds or we can ensure their construction and production ourselves.
We can help you not only with the construction of molds, but also with the plastic components themselves.
Mold maintenance and repairs are a matter of course.
You can also contact us if you need to start production again from already existing, but non-functional forms for various reasons. We can revive them again, or modify them.
Of course, we will pack, assemble and deliver all products according to your requirements. If necessary, we are able to carry out, for example, a 100 percent inspection.
We would also welcome the establishment of long-term cooperation.
We will look forward to your inquiries and of course we will also be happy to welcome you to our company.
Plastimax Tech s.r.o.
Zdenek Nemecek
Phone: 603 851 119
e-mail: znemecek@plastimax.cz
www.plastimax.cz- Jaroslav Němeček - E-Mail: jnemecek@plastimax.cz / +420604108506
-
Cooperation : Voľné výrobné kapacity - vstrekovanie plastov
- 24.11.2022
- ID: 202216288
V rámci kooperácie ponúkame možnosť výroby Vašich výrobkov za veľmi prijateľných cenových podmienok.
Naše služby ponúkame na dvoch vstrekolisoch D800/i7500-900, D200/i600.
Vyrábame pod značkou zákazníka a garantujeme na základe zmluvy - rámcovej dohody výrobné tajomstvo. Okrem vstrekovania na vašich formách vám vieme ponúknuť aj servis v oblasti skúšania nových foriem, kde vieme testovať a vyrobiť v rámci spolupráce aj malé série prototypov.
Zabezpečujeme montáž a kompletizáciu výrobkov podľa vašej požiadavky a aj balenie výliskov do rôznych obalov.
Na požiadanie zabezpečujeme logistiku na určené distribučné miesta.
Spĺňame normu ISO 9000-2015.Viac informácii a špecifikácie »
- DE-SK, s.r.o. | Radimír Skorka - E-Mail: info@de-sk.net / +421 908 906 200
-
Cooperation : Voľné výrobné kapacity - vstrekovanie plastov
- 28.09.2022
- ID: 202216105
V rámci kooperácie ponúkame možnosť výroby Vašich výrobkov za veľmi prijateľných cenových podmienok.
Naše služby ponúkame na troch úplne nových a presných vstrekolisoch D900/i7500, D250/i1100, D200/i850.
Vyrábame pod značkou zákazníka a garantujeme na základe zmluvy - rámcovej dohody výrobné tajomstvo. Okrem vstrekovania na vašich formách vám vieme ponúknuť aj servis v oblasti skúšania nových foriem, kde vieme testovať a vyrobiť v rámci spolupráce aj malé série prototypov.
Zabezpečujeme montáž a kompletizáciu výrobkov podľa vašej požiadavky a aj balenie výliskov do rôznych obalov.
Na požiadanie zabezpečujeme logistiku na určené distribučné miesta.
Spĺňame normu ISO 9000-2015.Viac informácii a špecifikácie »
- DE-SK, s.r.o. | Radimír Skorka - E-Mail: info@de-sk.net / +421 908 906 200
-
Cooperation : Free capacities
- 22.09.2022
- ID: 202216087
Dear business partners,
out of this way, the production of plastic parts on Arburg injection presses. Our division already produces 30 high-quality parts for domestic and foreign partners.
We currently have free capacity.
We offer:
- pressing of products up to 0.5 kg. With a closing force of up to 200t.
- horizontal and vertical pressing
- we are able to provide and produce quality molds from a 3D model, drawing or sample.
-Thanks to the universal frames, we are significantly cheaper tools than the competition.
- We are able to use interesting prices for pressings thanks to more favorable energy prices. We have our own solar power plant.
If you are interested in this offer and would like to get more information, please call me at tel. 725 642 082. Or write to milan.molnar@tvd.cz
My name is Milan Molnár and I am the production manager of the plastic injection division of the company TVD - Technická výroba a.s.
I look forward to seeing you..- Milan Molnar - E-Mail: milan.molnar@tvd.cz / 725642082
-
Cooperation : Free injection molding capacities
- 30.05.2022
- ID: 202215644
We offer available injection molding capacities-> two-component injection - ENGEL presses, closing force 300t and 400t-> ENGEL presses closing force 28 - 500t-> Certification TISAX, ISO 9001, ISO 14001, IATF 16949https://www.ims-sro.cz/index.php/cs/poptavky
- Lucie Vejdová - E-Mail: vejdova@ims-sro.cz / 775157218
-
Cooperation : Injection molding capacities
- 04.04.2022
- ID: 202215331
We offer available injection molding capacities
-> two-component injection - ENGEL presses, closing force 300t and 400t
-> ENGEL presses closing force 28 - 500t
-> Certification TISAX, ISO 9001, ISO 14001, IATF 16949https://www.ims-sro.cz/index.php/cs/poptavky
- IMS-Drašnar s.r.o. | Lucie Vejdová - E-Mail: vejdova@ims-sro.cz / 775157218
-
Cooperation : Production of atypical plastic parts
- 02.04.2022
- ID: 202215330
We offer the production of atypical plastic parts with additive technology according to ISO 9001: 2015
It is a technology where, if necessary, we eliminate high costs for the production of plastic parts, which are caused by production on injection molding machines. These are, for example, spare parts that are no longer available or can no longer be purchased, prototype components in development, components that are too expensive, jigs for automated lines, jigs for machine tools, various boxes for electronic components, atypical components demanding and expensive to manufacture .
We have different types of materials available for example, antistatic, flexible, very strong, high temperature resistant, UV resistant, water soluble and many more. We can choose the right one during the free consultation.
The number of pieces does not matter. We can deliver components within 48 hours!
ISO 9001 certification
If you are interested, you can contact me with a request and we can make you a free quote with a selection of the most suitable material for your application.
Contact:
mail: l.pavlis.praca@icloud.com
mobile: +421944393415- Ľubomír Pavliš - E-Mail: l.pavlis.praca@icloud.com / 0944393415
Latest Classifieds
-
14.03.2024 | ID: 202418782
Top Advert For Sale: PA6 GF30 regranulate
18.03.2024 | ID: 202418801
For Sale: PP COPO black regranulate
18.03.2024 | ID: 202418800
-
18.03.2024 | ID: 202418799
For Sale: PP gray regranulate - injection type
18.03.2024 | ID: 202418798
-
18.03.2024 | ID: 202418797
For Sale: HDPE regranulate - white/grey
18.03.2024 | ID: 202418796
To purchase: GPPS transparent regrind
06.03.2024 | ID: 202418731
To purchase: Package LDPE film ,PE 500 t/month
06.03.2024 | ID: 202418729
To purchase: Bayblend T 80 XG BBS910
22.02.2024 | ID: 202418671
-
20.02.2024 | ID: 202418666
-
20.02.2024 | ID: 202418665
To purchase: PC/ABS automotive
20.02.2024 | ID: 202418664
-
20.02.2024 | ID: 202418663
-
14.03.2024 | ID: 202418782
Top Advert For Sale: PA6 GF30 regranulate
18.03.2024 | ID: 202418801
For Sale: PP COPO black regranulate
18.03.2024 | ID: 202418800
-
18.03.2024 | ID: 202418799
For Sale: PP gray regranulate - injection type
18.03.2024 | ID: 202418798
-
18.03.2024 | ID: 202418797
For Sale: HDPE regranulate - white/grey
18.03.2024 | ID: 202418796
Upcoming Events
20.03.2024 - 22.03.2024 | Mumbai
20.03.2024 - 23.03.2024 | Bratislava
20.03.2024 - 21.03.2024 | Paríž
25.03.2024 - 28.03.2024 | Paris
26.03.2024 - 28.03.2024 | Lagos
01.04.2024 - 30.04.2024 | Paríž
03.04.2024 - 05.04.2024 | Tashkent
09.04.2024 - 12.04.2024 | Mníchov
09.04.2024 - 11.04.2024 | Gorinchem
agrofood & plastprintpack Ethiopia 2024
16.03.2024
18.03.2024
19.03.2024
19.03.2024
19.03.2024
18.03.2024
Forum of practical maintenance
19.03.2024
20.03.2024
Cybersecurity in the regions - Western Slovakia 2024
21.03.2024
22.03.2024
Job offers
Warehouseman/warehouse (valid VZV license as a condition) - EXPLAST Slovensko, s.r.o.
14.03.2024
Adjuster - AIS Automotive Interior Systems Slovakia s.r.o.
13.03.2024
Toolmaker - AIS Automotive Interior Systems Slovakia s.r.o.
13.03.2024
Plastic processing worker - Hard Plastic Recycling s.r.o.
13.03.2024
Sales Representative - ULTRAPOLYMERS, s.r.o.
12.03.2024
General tool maker - ESOX-PLAST s.r.o.
08.03.2024
Injection molding machine - ADVANCED SETTER
07.03.2024
Sales representative - sales specialist - Plastcom, spol. s r.o.
05.03.2024
Sales representative for Poland - Maloun s.r.o.
04.03.2024