Weekly commodity price report
Here are the market prices of various types of commodity plastics PE-LD, PE-HD, PP and PS in Central and Eastern Europe with a delay of 5 weeks. The data was processed by our partner myCEPPI.
Are you interested in current prices for commodity plastics? You can order Weekly polymer price reports from our editors.
Prices for this week 10/2020
The following factors influenced “commodity” polymer prices last week:
- BRENT oil price 45.27 USD / barrel, falling oil prices
- EUR/USD: 1.1306, turning trend, strengthening of the Euro
- NAPHTHA (European): 376.88 USD/t, rising prices again,
- March contract monomer prices:
- Ethylene (C2) contract price -50 EUR/t (920 EUR / t),
- Propylene (C3) contract price -20 EUR/t (825 EUR / t)
- Styrene monomer (SM) contract price -126 EUR / t (941 EUR / t)
- All Central European polymer producers are producing.
- Expected outages:
- Rompetrol: 2020. March 15 - May 5, 2020 (LDPE, PP)
- Unipetrol: April 6 - May 18, 2020 (HDPE, PP, C2, C3)
- Limited imports from outside Europe for both PE, PP and PS.
Oil and NAPHTHA prices are falling steadily as a result of the Asian economic downturn due to the coronavirus. This in turn fundamentally influences the mood of converters. Everyone expects a polymer price drop.
Polymer producers reacted differently to the drop in the price of ethylene (C2) monomer by EUR 50. Central European producers have passed on to their customers price reductions lower than the ethylene price. The price of polyethylene has typically decreased by 10-30 EUR/t. Western European manufacturers have stepped up and reduced their polyethylene prices by € 30-50. As a result, their price level is close to that of local (CE) producers. In the supply of polyethylene there is a container shortage in Europe and North America due to the coronavirus. Thus, there is little PE coming from North America.
Polymer producers reacted differently to the fall in the price of propylene monomer (C3) -20 EUR/t. Central European producers have generally reduced their polymer prices by 0-30 EUR/t. However, some Western European manufacturers have been trying to raise prices. The extent of the price rise was as high as 50 EUR/t in case of some customers. The reason for the price increase is to restore the margin level lost between November 2019 and the end of January 2020. The price increase is supported by less import of PP into Europe, by European maintenance in preparation, and by the fact that Russia is expected send less PP in the next 2 months. As a result, in the case of PPH in particular, one has to prepare for a tight supply by the end of April. PPH prices may start rising in March.
The decline in styrene monomer (SM) - € 126/t surprised the market. The reason is the oversupply on the world market. Polystyrene manufacturers reacted to the SM price drop with a price reduction of 50-70 EUR/t. For the time being, buyers want more, so demand has been weak last week. However, due to the closing of the Iran-Turkey border, no goods are coming from Iran at all. There is also little Russian material on the market. Thus, customers can rely on European producers only.
POLYOLEFIN GRADES
LDPE prices were in a range of 880-960 €/t last week. The bottom of the price band fell by € 10 and the top dropped by € 30 compared to February. Average prices dropped by 20-30 €. Some Western European manufacturers have cut prices by € 50/t. Final prices will be set in the week ahead as buyers place their orders. Demand in March looks good. Due to the coronavirus, there is no decline in production.
Typical HDPE prices were in a range of 870 - 960 €/t in Central Europe last week. Price reductions were in the broad range of -20-50 €. Now more and more producers in Europe are approaching € 900. Demand is good, the season seems to have begun. Customers typically expected a maximum reduction of € 50. Typical HDPE prices were as follows:
- HDPE BM: 890-960 €/t,
- HDPE IM: 900-960 €/t,
- HDPE FILM: 870-940€/t,
Prices of European grades are slowly closing in with non-European import prices. A bimodal HDPE product from Unipetrol's new plant has been launched, but only IM is currently available.
Typical HDPE (100) prices were in a range of 1,110-1,180 €/t last week. Demand in February was good, and March seems to be good as well. In the pipe segment, producers have made varying price reductions between € 10 and € 50. The final March prices will be out next week.
LLDPE C4 prices were in a range of 920-1,020 €/t last week. Demand is uncertain as all other PE prices have fallen significantly. Logistics problems in world trade and the strengthening euro are likely to affect
LLDPE C4 prices in the coming months. Thus, we expect a narrowing supply and stable, slightly rising prices.
mLLDPE (C6) prices were in a range of 1,050-1,140 €/t last week. The price range has narrowed and average prices have fallen. Demand is moderate but there is significant oversupply.
Typical PPH Raffia prices were in a range of 920-1,020 €/t last week. They did not change. Although some producers have reduced prices, this has not pushed the bottom of the price band down. Other Western European producers have made significant price increases, but this has not pushed the top value of the price range upwards. Due to expected shutdowns at Rompetrol, Unipetrol and SIBUR tobolski, we expect supply to decline in March and April. This may also lead to price increases.
The price of PPM IM non-special products with medium melt index was in a range of 900-1,030 €/t last week.The price of products with high melt flow index ranged from 970 to 1,080 €/t. Demand for both grades is good. Some producers made a roll-over, others reduced their prices by 10-20 €/t, but some made significant price increases. Demand is good and will probably remain good in March and April.
Typical PPC prices ranged from 1,040 to 1,180 €/t in Central Europe. The price range as a whole has virtually rolled over. Demand is not bad. There are few imported PPCs from Saudi Arabia and South Korea. They started their journey before the coronavirus outbreak, their prices are at the bottom of the price range. However, we expect less imports from outside Europe in the coming months. As a result, supply will be reduced.
PPR prices were in a range of 1,100-1,200 €/t last week. In terms of the price range as a whole, there has also been a rollover. PP producers have made 'mixed' decisions. There was also a price increase, a roll-over, a drop in prices. However, this can best be interpreted as a price movement within the band.
The typical prices of the last week are presented in the table below (full truck load 20-22.5 t):
Grade name | Typical polymer price ranges in the first week of March 2020, Central Europe (€/ton) |
HDPE BM | 890-960 |
HDPE Film | 870-940 |
HDPE IM | 900-960 |
HDPE Pipe (100) | 1100-1180 |
LDPE Film | 880-960 |
LDPE GP | 880-960 |
LLDPE C4 | 880-1020 |
mLLDPE C6 | 1020-1120 |
PPC | 1040-1180 |
PPH IM | 900-1030 |
PPH IM HMFR | 970-1080 |
PPH Raffia | 920-1020 |
PPR | 1100-1200 |
GPPS | 1030-135 |
HIPS | 1110-1190 |
EPS | 1030-1100 |
ABS | 1400-1550 |
POLYSTYRENE GRADES
Typical EPS prices were in a range of 1,030-1,100 €/t last week. The past week was characterized by a bargain for the price. Most deals were made in a band of 1.030-1.050. Those who were outside were forced to cut prices. The net-price for big buyers (after bonus, after discounting) can be as low as below € 1,000/t.
Typical GPPS prices were in a range of 1,030-1,135 €/t, while HIPSprices were in a range of 1,110-1,190 €/t . There was just a low number of transactions last week. Demand for HIPS was strong, while for some GPPS grades there was a shortage of feedstock. Customers are making their purchasing decisions dependent on their April expectations.
Typical natural ABS prices were in the price range of 1,400-1,550 €last week. The market is still characterized by oversupply. The SM price cut brought the higher-priced European prices down by € 100. Last week's demand was low and we expect a recovery in the second week of March.
Type | Price |
---|---|
HDPE blow molding | 927 € / t |
HDPE film | 929 € / t |
HDPE injection molding | 946 € / t |
HDPE pipe (100) | 1150 € / t |
LDPE film | 925 € / t |
LDPE general purpose | 924 € / t |
PP co-polymer injection molding | 1103 € / t |
PP homo-polymer fiber | 966 € / t |
PP homo-polymer injection molding | 968 € / t |
PPR | 1148 € / t |
GPPS | 1099 € / t |
HIPS | 1170 € / t |
EPS | 1074 € / t |
myCEPPI – a new voice and new approach on the plastics industry consulting and business intelligence market. With our expert advice, you can get a detailed, up-to-date and tailor-made picture of the Central and Eastern European plastics market and its main trends, data, news and key players.
Our services rely on our personal, regular and in-depth relations with players of the CEE plastics industry.
Each month, we conduct hundreds of interviews and telephone calls with industry players – plastics converters, traders, resin manufacturers – and we are also present at the biggest regional plastics trade fairs and conferences.
The information we collect in the process forms the basis of our weekly price report and market analysis; it feeds into our plastics industry company database; and it serves as the starting point for our multi-level consulting services for companies that need help sizing up, entering or navigating a specific market.
Our experts possess decades of plastics industry experience, as well as fluency in several regional languages.
Our partners include
- key players of the CEE plastics industry – the resin
- master-batch and machinery manufacturers
- distributors, and plastics converters that shape market trends across the region.
We would be happy to welcome you as a partner; please do not hesitate to contact us!
(László Büdy, Managing director, head of consulting)
Price history
- 2024:
- 2023:
- 2022:
- 2021:
- 2020:
- 2019:
- 2018:
- 2017:
Latest Classifieds
Cooperation: Free production capacity on injection molding and extrusion line
04.04.2024 | ID: 202418891
Top Advert-
05.03.2024 | ID: 202418726
Top Advert -
26.04.2024 | ID: 202419032
For Sale: PA6 Slovamid 6 FRC 2 LS original orange, gray
26.04.2024 | ID: 202419031
For Sale: PP regranulate color green, blue MFI 8-12
25.04.2024 | ID: 202419030
-
24.04.2024 | ID: 202419027
For Sale: Plastic regrind black PPPE,350€/t
24.04.2024 | ID: 202419026
For Sale: PBT regranulate, natur
24.04.2024 | ID: 202419025
-
23.04.2024 | ID: 202419024
-
26.04.2024 | ID: 202419032
To purchase: Package quality LDPE film. 500 t/month
22.04.2024 | ID: 202419013
To purchase: Dirty granulates from ground
22.04.2024 | ID: 202419011
To purchase: PPSU regrind banner
17.04.2024 | ID: 202418988
To purchase: POM C regrind colour, white, natur
17.04.2024 | ID: 202418986
To purchase: PC and PMMA waste, regrinds, lumps etc.
11.04.2024 | ID: 202418943
To purchase: PET transparent trays, only Central Europe due to shipping costs
10.04.2024 | ID: 202418939
To purchase: PA6.6 GF25, TECHNYL A218, original
09.04.2024 | ID: 202418928
-
09.04.2024 | ID: 202418927
-
05.03.2024 | ID: 202418726
Top Advert For Sale: PA6 Slovamid 6 FRC 2 LS original orange, gray
26.04.2024 | ID: 202419031
For Sale: PP regranulate color green, blue MFI 8-12
25.04.2024 | ID: 202419030
-
24.04.2024 | ID: 202419027
For Sale: Plastic regrind black PPPE,350€/t
24.04.2024 | ID: 202419026
For Sale: PBT regranulate, natur
24.04.2024 | ID: 202419025
-
23.04.2024 | ID: 202419024
-
22.04.2024 | ID: 202419021
For Sale: PA 6.6 Ultramid A3U42G6 grind
22.04.2024 | ID: 202419020
Upcoming Events
06.05.2024 - 10.05.2024 | Orlando
Saudi Plastics and Petrochem 2024
06.05.2024 - 09.05.2024 | Rijád
06.05.2024 - 09.05.2024 | Stuttgart
07.05.2024 - 10.05.2024 | Budapeš
07.05.2024 - 10.05.2024 | Budapest
13.05.2024 - 17.05.2024 | München
14.05.2024 - 17.05.2024 | Jönköping
14.05.2024 - 16.05.2024 | Rheda-Wiedenbrück
Romexpo Metalshow TIB- Bucharest 2024
14.05.2024 - 17.05.2024 | Bukureš
22.04.2024
22.04.2024
23.04.2024
23.04.2024
23.04.2024
Job offers
Moulding Machines Setter - Tristone Flowtech Slovakia s.r.o.
11.04.2024
Plastic worker, gluing staff - FORM s.r.o.
10.04.2024
Logistics, warehouse and shipping supervisor - KNP s.r.o.
09.04.2024
Warehouseman - AIS Automotive Interior Systems Slovakia s.r.o.
09.04.2024
Sales representative / sales specialist - Plastcom, spol. s r.o.
04.04.2024
Maintenance and operation of the production line - Plastcom, spol. s r.o.
04.04.2024
Quality control technician - ESOX-PLAST s.r.o.
04.04.2024
Master of professional training - ESOX-PLAST s.r.o.
04.04.2024
Store manager - Ecocycle s.r.o
25.03.2024