Weekly commodity price report
Here are the market prices of various types of commodity plastics PE-LD, PE-HD, PP and PS in Central and Eastern Europe with a delay of 5 weeks. The data was processed by our partner myCEPPI.
Are you interested in current prices for commodity plastics? You can order Weekly polymer price reports from our editors.
Prices for this week 8/2019
The following factors influenced “commodity” polymer prices and price expectations last week:
- BRENT oil price 64.57 USD/barrel, slightly increasing prices,
- EUR/USD: 1.1267, EURO getting weaker
- NAPHTHA: 475.4 USD/t, increasing prices
- Unbalanced demand,
- Slightly increasing SPOT monomer olefin and SM prices
- Ethylene (C2) spot price (FD NWE): +15 EUR/t compared to the status at the beginning of the month (800 EUR/t),
- Propylene (C3) spot price (FD NWE): +5 EUR/t compared to early the month, Styrene monomer (SM) spot price (FOB Rotterdam): +15 USD/t compared to one week ago (1,005 USD/t),
- Generally good, broad supply,
European economy and polymer demand slowing down. As we wrote last week, converters are precautious. The mood of the market is not optimistic. Though nobody reported a significant drop of demand and fallback. Yet there is a general bad mood among converters. There are two reasons for this; one is that the opinion that economic slowdown, recession is at hand starts to be generally spreading. The other reason is that the market starts to be chaotic. Numerous new players appeared recently, with more and more “exotic” polymers. The more “exotic”, the cheaper. In case of LDPE and PPC it is general that the price of these polymer grades is in the bottom of the price range, the problem is that often this is scheduled to be supplied in March. This means that the bottom of the price range will be on this level in March as well. In this way it will be difficult to make the usual price increase in March. Spot monomer prices in the middle of February do not forecast the increase of contractual monomer prices for March. NAPHTHA and oil prices increased also just a little. In addition the purchasing habits of converters have changed significantly last year. Actual orders, purchases were shifted to the second half of the month. When polymer producers are already willing to offer minor or major rebates in order to fulfil their sales plan. The same happens also this February. Otherwise the season has started, as due to the favorable weather the production of plastics products both for construction and agriculture has started. For the time being the volume of orders also seems to be not lower than last year. Though the one-off order size of finished products and polymer grades as well decreased, yet converters order more frequently. All this purports as if converters would buy “more slowly”. The increased frequency of “spot” purchases from unusual sources has also contributed to the reduction of the demand and to this feeling. Converters who are not bound by a certain grade buy alternative grades more and more frequently from new sources. All in all, on the market for plastic conversion the demand is good like it usually is in February, both in case of polyolefin and polystyrene grades.
Polyolefin grades
Typical LDPE prices were in a range of 950-1,050 €/t last week. The shutdown of the plant of SABIC in Wilton did not move prices upwards either. For the time being Rompetrol does not offer LDPE grades for export either. The bottom of the price range stabilized clearly at 950 €/t. This price covers first of all grades imported from outside of Europe in small quantities. And it means the prices for major buyers corrected by the end-of-the-year bonuses. Demand is good. Sellers anticipate the market to become more dynamic during the next 2 weeks. The fact that the shutdown of HIP-Petrohemija in the second half of March will decrease the pressure exerted by supply, first of all in the southern region, motivates purchases.
In Central Europe the typical HDPE prices remained in a range of 1,050-1,160 €/t. HDPE IM was available in a range of 1,050 -1,120 €/t. HDPE Film prices increased a bit, they were in a range of 1,070-1,160 €/t. HDPE BM grades were available in a price range of 1,070-1,160 €/t. Supply is good. Demand is getting stronger.
HDPE (100) prices did not change significantly, they are in a range of 1,240-1,320 €/t. The season seems to be starting. Demand is getting dynamic. In construction in almost all countries of Central-Europe growth is to be expected.
LLDPE C4 prices were in a range of 950 - 1,020 €/t last week. The price range dropped by some 20 €. Price reduction gave a boost to demand.
mLLDPE prices are in a range of 1,130-1,340 €/t. For the time being prices did not change. Yet the price drop observed last year, in case of C6 in particular, is expected to continue, because of the new capacities entering.
PPH prices stabilized in a range of 1,110-1,240 €/t. Demand is high. In addition to Russian producers LyondellBasell is also struggling with supply problems in Central-Europe. In this way PPH demand is expected to remain high also during the next two weeks.
PPH Raffia prices stabilized in a range of 1,100-1,160 €/t. The price range of non-special PPM IM products with medium melt index was 1,110-1,180 €/t. The prices of products with high melt index were in a range of 1,170-1,240 €/t last week. We did not see “exotic” PP homopolymer grades from outside of Europe. Correspondingly the supply is short.
Typical prices of PPC grades were in a range of 1,190-1,300 €/t in Central-Europe last week, they did not change compared to the previous week. Due to the import from outside of Europe supply is abundant. Demand is good and in line with the season.
The PPR price range was 1,240-1,340 €/t, depending on the grade, producer and application area, they remained on the level of the previous week. Demand is good and supply is satisfactory. In the second half of the month dynamic demand is expected.
The typical prices of the last week are presented in the table below (full truck load 20-22.5 t):
Grade name | Typical polymer price ranges in the second week of February, 2019, Central Europe (€/ton) |
HDPE BM | 1070-1160 |
HDPE Film | 1070-1160 |
HDPE IM | 1050-1120 |
HDPE Pipe (100) | 1240-1320 |
LDPE Film | 950-1050 |
LDPE GP | 950-1050 |
LLDPE C4 | 950-1020 |
mLLDPE | 1130-1340 |
PPC | 1200-1270 |
PPH IM | 1110-1180 |
PPH IM HMFR | 1170-1240 |
PPH Raffia | 1100-1160 |
PPR | 1240-1340 |
GPPS | 1170-1220 |
HIPS | 1200-1300 |
EPS | 1200-1280 |
Polystyrene grades
Also last week in Central Europe EPS prices were in a range of 1,200-1,280 €/t. Because of the good weather demand is good. But EPS feedstock producers accept no orders any more. In March demand increasing further is expected. During the first six months high demand will be typical in all countries of Central-Europe.
On the GPPS/HIPS market there are no cheap quantities any more. The policy of traders not to launch their inventories at that price level yielded results. Typical GPPS prices increased to a price range of 1,170-1,220 €/t again. HIPS prices were in a range of 1,220-1,300 €/t last week. Demand is good.
Type | Price |
---|---|
HDPE blow molding | 1105 € / t |
HDPE film | 1100 € / t |
HDPE injection molding | 1101 € / t |
HDPE pipe (100) | 1283 € / t |
LDPE film | 996 € / t |
LDPE general purpose | 997 € / t |
PP co-polymer injection molding | 1242 € / t |
PP homo-polymer fiber | 1156 € / t |
PP homo-polymer injection molding | 1169 € / t |
PPR | 1277 € / t |
GPPS | 1188 € / t |
HIPS | 1217 € / t |
EPS | 1230 € / t |
myCEPPI – a new voice and new approach on the plastics industry consulting and business intelligence market. With our expert advice, you can get a detailed, up-to-date and tailor-made picture of the Central and Eastern European plastics market and its main trends, data, news and key players.
Our services rely on our personal, regular and in-depth relations with players of the CEE plastics industry.
Each month, we conduct hundreds of interviews and telephone calls with industry players – plastics converters, traders, resin manufacturers – and we are also present at the biggest regional plastics trade fairs and conferences.
The information we collect in the process forms the basis of our weekly price report and market analysis; it feeds into our plastics industry company database; and it serves as the starting point for our multi-level consulting services for companies that need help sizing up, entering or navigating a specific market.
Our experts possess decades of plastics industry experience, as well as fluency in several regional languages.
Our partners include
- key players of the CEE plastics industry – the resin
- master-batch and machinery manufacturers
- distributors, and plastics converters that shape market trends across the region.
We would be happy to welcome you as a partner; please do not hesitate to contact us!
(László Büdy, Managing director, head of consulting)
Price history
- 2024:
- 2023:
- 2022:
- 2021:
- 2020:
- 2019:
- 2018:
- 2017:
Latest Classifieds
Cooperation: Free production capacity on injection molding and extrusion line
04.04.2024 | ID: 202418891
Top Advert-
05.03.2024 | ID: 202418726
Top Advert -
26.04.2024 | ID: 202419032
For Sale: PA6 Slovamid 6 FRC 2 LS original orange, gray
26.04.2024 | ID: 202419031
For Sale: PP regranulate color green, blue MFI 8-12
25.04.2024 | ID: 202419030
-
24.04.2024 | ID: 202419027
For Sale: Plastic regrind black PPPE,350€/t
24.04.2024 | ID: 202419026
For Sale: PBT regranulate, natur
24.04.2024 | ID: 202419025
-
23.04.2024 | ID: 202419024
-
26.04.2024 | ID: 202419032
To purchase: Package quality LDPE film. 500 t/month
22.04.2024 | ID: 202419013
To purchase: Dirty granulates from ground
22.04.2024 | ID: 202419011
To purchase: PPSU regrind banner
17.04.2024 | ID: 202418988
To purchase: POM C regrind colour, white, natur
17.04.2024 | ID: 202418986
To purchase: PC and PMMA waste, regrinds, lumps etc.
11.04.2024 | ID: 202418943
To purchase: PET transparent trays, only Central Europe due to shipping costs
10.04.2024 | ID: 202418939
To purchase: PA6.6 GF25, TECHNYL A218, original
09.04.2024 | ID: 202418928
-
09.04.2024 | ID: 202418927
-
05.03.2024 | ID: 202418726
Top Advert For Sale: PA6 Slovamid 6 FRC 2 LS original orange, gray
26.04.2024 | ID: 202419031
For Sale: PP regranulate color green, blue MFI 8-12
25.04.2024 | ID: 202419030
-
24.04.2024 | ID: 202419027
For Sale: Plastic regrind black PPPE,350€/t
24.04.2024 | ID: 202419026
For Sale: PBT regranulate, natur
24.04.2024 | ID: 202419025
-
23.04.2024 | ID: 202419024
-
22.04.2024 | ID: 202419021
For Sale: PA 6.6 Ultramid A3U42G6 grind
22.04.2024 | ID: 202419020
Upcoming Events
06.05.2024 - 10.05.2024 | Orlando
Saudi Plastics and Petrochem 2024
06.05.2024 - 09.05.2024 | Rijád
06.05.2024 - 09.05.2024 | Stuttgart
07.05.2024 - 10.05.2024 | Budapeš
07.05.2024 - 10.05.2024 | Budapest
13.05.2024 - 17.05.2024 | München
14.05.2024 - 17.05.2024 | Jönköping
14.05.2024 - 16.05.2024 | Rheda-Wiedenbrück
Romexpo Metalshow TIB- Bucharest 2024
14.05.2024 - 17.05.2024 | Bukureš
23.04.2024
23.04.2024
23.04.2024
23.04.2024
06.05.2024
Job offers
Moulding Machines Setter - Tristone Flowtech Slovakia s.r.o.
11.04.2024
Plastic worker, gluing staff - FORM s.r.o.
10.04.2024
Logistics, warehouse and shipping supervisor - KNP s.r.o.
09.04.2024
Warehouseman - AIS Automotive Interior Systems Slovakia s.r.o.
09.04.2024
Sales representative / sales specialist - Plastcom, spol. s r.o.
04.04.2024
Maintenance and operation of the production line - Plastcom, spol. s r.o.
04.04.2024
Quality control technician - ESOX-PLAST s.r.o.
04.04.2024
Master of professional training - ESOX-PLAST s.r.o.
04.04.2024
Store manager - Ecocycle s.r.o
25.03.2024