Current News Articles - page 48
Daily updated information and news from the plastics industry.
-
METROTOM - Measuring Technology of the Future from Carl Zeiss
- 17.08.2016
- Machinery & Equipment
- Quality control
METROTOM® from Carl Zeiss – the door to measuring technology of the future. Place your workpiece in the measuring cabin, and start the scanning process. An in-depth quality analysis is available almost right...
-
Plastics and rubber with the best global growth prospects
K fair in Düsseldorf presents the achievements of the industry and leading technological...
-
Fraud with Hostaform® POM
- 15.08.2016
- Suppliers of raw materials
Hostaform® POM is the material most commonly prescribed automotive and other OEM who greatly valued its high and consistent quality. His only official distributor in the Czech Republic and Slovakia is company...
-
Sportage key to record results for the first half
- 11.08.2016
- Plastics and Rubber products
Also during the first half of 2016 we went to production line of Kia Motors Slovakia fullest. For the first six months Kia produced 177,900 cars, representing a 4.7-percent annual growth compared with the first half of 2015. Engine production also grew and the end of June 2016, they managed to...
-
Magnetic clamping: benefits QMC122 from Stäubli Systems, s.r.o.
- 10.08.2016
- Plastics Moulds
- Design of molds
Magnetic clamping systems Stäubli QMC122 forms are among the most advanced and reliable technologies in the plastics industry. The main advantages of this robust system is especially high safety for operators and quality feedback and control over the process from the control...
-
Schoeller Allibert celebrated the grand opening of a new production plant in Zabrze
- 08.08.2016
- Services
On 12 May, in Katowice, in a special economic zone in Zabrze on the street Redena opened a new manufacturing facility Schoeller Allibert Sp....
-
Odor and emission behavior of thermoplastic moldings in the interior of cars, Part 3
- 04.08.2016
- Plastics Processing
- Research
Continuation of the article of Mr. Lubomir Zeman dated July 28,...
-
Separation of waste in the Bratislava region is at odds! The eco-educational programs on this topic is a record interest!
- 03.08.2016
- Plastics recycling
DAPHNE - Institute of Applied Ecology from 2011 teaches two original environmental education programs with a focus on sorting and recycling of municipal waste, and particularly in the Bratislava...
-
PROMYDE® PA6 - industrial multitalent
- 01.08.2016
- Suppliers of raw materials
- PA Polyamide
Every day we meet with polyamide parts in machines, automobiles, electronics, sports equipment and many other products. Promyde® can be used in many different fields and applications, and combines the cost efficiencies and excellent mechanical...
-
Odor and emission behavior of thermoplastic moldings in the interior of cars, Part 2
- 28.07.2016
- Plastics Processing
- Research
Continuation of the article of Mr. Lubomir Zeman dated July 21,...
-
Replacement of metal with the latest technology LFT
- 27.07.2016
- Plastics and Rubber products
- Compounds
The innovative production method allows the new highly modular specialty...
-
European Bioplastics welcomes revised EU waste legislation
- 26.07.2016
- Plastics recycling
European Bioplastics (EUBP) has backed a new European Parliament report on revised waste legislation which has emphasised the role of bioplastics to help the move to a circular...
-
Terrace system TWINSON from TITAN-Multiplast
Products of a patented material that combines wood and plastic, by its natural appearance fits perfectly into any...
-
Odor and emission behavior of thermoplastic moldings in the interior of cars, Part 1
- 21.07.2016
- Plastics Processing
- Research
PlasticPortal.eu brings you a professional article from Mr. Lubomir Zeman of the company PLAST FORM SERVICE,...
-
Polykemi AB is gearing up: Gearshift knobs in POLYfill PP TOUCH!
Now Swedish compounder Polykemi AB increases the grip within exciting and technically demanding applications. This by presenting material alternatives within fields where previously for instance TPU´s have been considered as being the state of the art...
-
Injection molding process timed with pinpoint accuracy
Weekly Timer, the new function from KraussMaffei, makes it possible to set the production start during injection molding precisely. This prevents unnecessary machine waiting times and significantly reduces energy costs. Weekly Timer is integrated by default into the KraussMaffei MC6 control...
-
Automotive Forum of PolyOne Proves to be a Platform for Collaboration
- 14.07.2016
- Suppliers of raw materials
Experts from throughout the automotive industry, from molders to OEMs, joined PolyOne for its Automotive Insight Forum on June 8 in Frankfurt, Germany. The event provided an open forum to discuss trends, manufacturing challenges and potential solutions, and to foster continued...
-
ENGEL is showcasing a comprehensive range of inject 4.0 products
- 13.07.2016
- Machinery & Equipment
- Industry 4.0
inject 4.0 is ENGEL's answer to the challenges of the Fourth Industrial Revolution. The injection moulding machine manufacturer and systems expert, with headquarters in Schwertberg, Austria, is to present its inject 4.0 program at K 2016 from October 19th to 26th in...
-
MCAE Systems Introduces New ATOS Scanbox Series 7 and 8 to measure large parts
MCAE Systems expands product range offered automated measuring systems ATOS of GOM Scanbox from the series known as 7 and...
-
Patented control mold temperature valve helps produce plastic cups NICKNACK® in company 2D & S
- 11.07.2016
- Plastics Moulds
- Design of molds
How to keep a constant temperature of injection moulds? This is a question faced by many...
-
Three SPE Awards for EMS-GRIVORY
EMS was among the smiling winners at the 16th Award Night of the "Society of Plastics Engineers", SPE. Three innovative applications using EMS' high-performance polymers were nominated for a SPE Automotive Award each - and all three won the...
-
FLEXflow and Moldflow come together – Exploiting advantages at the planning stage in the cascade injection molding process
- 06.07.2016
- Plastics Moulds
- Hot runners
One of the highlights of the Italian hot runner specialist HRSflow is the innovative FLEXflow technology. This process, which has been subjected to constant further development, involves a servo-driven valve gate to ensure accurate, easy and flexible control of the pressures and flow rates in...
-
A significant increase in recycling fees for trading
- 04.07.2016
- Plastics recycling
- Waste Management
The new law on waste in the next few days will cause a significant increase in recycling fees and traders due to changes in the funding system of separate collection, which could incur the price increases to the...
-
Focus on Cloud and data management Solid Edge ST9
- 30.06.2016
- Services
- Software for industry
Solid Edge is sometimes referred to as the best kept secret in CAD...
-
MCAE Systems becomes a global service partner network Stratasys Direct Manufacturing
- 29.06.2016
- Machinery & Equipment
- 3D technology
The company MCAE Systems in Strahov Monastery in Prague on June 2nd 2016 officially signed a contract with Stratasys Direct Manufacturing, thus becoming the ninth member of the global network of partners who provide services in the field of 3D technology the de facto worldwide. In MCAE thus...
-
5th big olympic final winning schools praised for the tremendous effort in sorting paper and plastic!
- 28.06.2016
- Plastics recycling
- Events
On 15.06.2016 took place on the Main Square in Bratislava Great Olompic finals. The event was the closing ceremony of the 5th Annual Project OLOMPIÁDA to which the school year 2015/2016 and involved 21,000 students and 112 children from kindergartens, primary and special schools. OLOMPIÁDA aim is...
-
First application on your management quality that is absolutely free
- 27.06.2016
- Services
- Software for industry
Every single manager or quality engineer has already experienced a situation where on Friday after a busy week is looking forward to the weekend, but then received a call from a...
-
Polymer Forum in the Czech Republic surpassed all expectations
- 23.06.2016
- Suppliers of raw materials
- Events
After three successful Polymer forums in Germany, on June 7 2016 held its first Polymer Forum TER Plastics POLYMER GROUP outside Germany - in Brno, Czech Republic. The conference was a huge success from the very beginning, with more than 100 participants from various important sectors such as the...
-
RESINEX acquired an european distribution of high-end design and specialty plastics company DSM
Thanks to a Europe-wide distribution RESINEX has succeeded to combine the requirements of a large number of customers and negotiate for them so very reasonable prices. The material is held either in local warehouses in each European country, or the central warehouse in Belgium to ensure rapid and...
-
Bioplastic to help fix things
- 21.06.2016
- Plastics Semi-finished products
FORMcard is a handy, pocket sized card of strong, meltable biopolastic that you can use to make, fix and modify the world around you. Just drop it in a cup of hot water and it's ready to use. Keep one in your wallet, toolbox or kitchen drawer so that it's always around when you need to fix...
Latest Classifieds
For Sale: Original granulates LDPE, HDPE, PE, PP, PET
26.07.2022 | ID: 20229168
Top AdvertFor Sale: LDPE regranulat (EPE foam)
28.03.2024 | ID: 202418847
For Sale: Protective sheets for welding boxes
27.03.2024 | ID: 202418846
For Sale: Regrind black PPPE injection
26.03.2024 | ID: 202418845
-
25.03.2024 | ID: 202418844
Cooperation: Recycling of plastic waste
25.03.2024 | ID: 202418843
For Sale: PA 66 GF 30 regrind natur+white
25.03.2024 | ID: 202418842
-
21.03.2024 | ID: 202418823
To purchase: LDPE film, 500 t/month
21.03.2024 | ID: 202418813
-
20.03.2024 | ID: 202418812
To purchase: PE 50 t films in rolls - new
20.03.2024 | ID: 202418810
To purchase: GPPS transparent regrind
06.03.2024 | ID: 202418731
To purchase: Bayblend T 80 XG BBS910
22.02.2024 | ID: 202418671
-
20.02.2024 | ID: 202418666
For Sale: Original granulates LDPE, HDPE, PE, PP, PET
26.07.2022 | ID: 20229168
Top AdvertFor Sale: LDPE regranulat (EPE foam)
28.03.2024 | ID: 202418847
For Sale: Protective sheets for welding boxes
27.03.2024 | ID: 202418846
For Sale: Regrind black PPPE injection
26.03.2024 | ID: 202418845
-
25.03.2024 | ID: 202418844
For Sale: PA 66 GF 30 regrind natur+white
25.03.2024 | ID: 202418842
-
25.03.2024 | ID: 202418841
Upcoming Events
01.04.2024 - 30.04.2024 | Paríž
03.04.2024 - 05.04.2024 | Tashkent
09.04.2024 - 12.04.2024 | Mníchov
09.04.2024 - 11.04.2024 | Gorinchem
11.04.2024 - 14.04.2024 | Bratislava
15.04.2024 - 19.04.2024 | Düsseldorf
16.04.2024 - 18.04.2024 | Abu Dhabi
16.04.2024 - 18.04.2024 | Bydgoszcz
17.04.2024 - 20.04.2024 | Istanbul
25.03.2024
26.03.2024
01.04.2024
03.04.2024
09.04.2024
Project management - effective project management
25.03.2024
10.04.2024
Training - Injection moulding technology I.
15.04.2024
Festival of personnel and talent development
16.04.2024
17.04.2024
Job offers
Store manager - Ecocycle s.r.o
25.03.2024
Brusiè na kulato - KOVOROB, s.r.o.
22.03.2024
Head of tool shop - KOVOROB, s.r.o.
22.03.2024
Designer of plastic injection molds - KOVOROB, s.r.o.
22.03.2024
Warehouseman/warehouse (valid VZV license as a condition) - EXPLAST Slovensko, s.r.o.
14.03.2024
Adjuster - AIS Automotive Interior Systems Slovakia s.r.o.
13.03.2024
Toolmaker - AIS Automotive Interior Systems Slovakia s.r.o.
13.03.2024
Plastic processing worker - Hard Plastic Recycling s.r.o.
13.03.2024
Sales Representative - ULTRAPOLYMERS, s.r.o.
12.03.2024