Current News Articles - page 46
Daily updated information and news from the plastics industry.
-
The company ARSIQA system, s.r.o. brings you AROP - The planning and management
- 18.01.2017
- Services
- Software for industry
Our target customers are manufacturing factories virtually any...
-
ENGEL presenting new plasticising screws
- 17.01.2017
- Machinery & Equipment
- Injection molding machines
The plasticising unit has tremendous influence on the quality and performance of the injection moulding machine. To meet the customers' individual requirements in an even more targeted way, injection moulding machine manufacturer ENGEL AUSTRIA has revised and extended its portfolio of plasticising...
-
New Additive from GRAFE Improves Polymer Melt
- 16.01.2017
- Suppliers of raw materials
- Additives for plastics
The plastics processing industry is about reducing cycle times and thus decreasing production costs and energy consumption, and therefore the injection molding machine or the periphery is mostly targeted. In this process, the polymer itself has potential, if it succeeds in optimizing the processing...
-
Kia produced in Slovakia during 10 years more than 2.5 million cars and continue its investments
- 12.01.2017
- Services
- Automotive
- Business economics
Since the official launch of volume production on 7 December 2006 it rolled off the production line at Kia Motors Slovakia for more than 2.5 million cars and 3.8 million...
-
Feasibility study and manufacture of injection molded thermoplastics, Part 4
Continuation of the article p. Lubomir Zeman dated December 29,...
-
Materials of the future in Slovakia
Magnesium and aluminum materials are promising future. Their use we talked to Frantisek Šimančík of the Institute of Materials and Machine...
-
Cylinders with extended life
- 03.01.2017
- Machinery & Equipment
- Design of molds
Hydraulic cylinders for plastic molds are separate and special category rollers. Their application is different from a standard industrial rolls...
-
MCAE Systems launches a new generation of 3D Printers Stratasys Fortus, which significantly extend the capabilities of 3D printing
- 02.01.2017
- Machinery & Equipment
- 3D technology
Large format printer Stratasys Fortus 900mc meets the demands of the production 3D printers to high capacity, precision and repeatability. Additionally enables 3D printing of new material Stratasys FDM Nylon 6 and uses the printer software...
-
Feasibility study and manufacture of injection molded thermoplastics, part 3
- 29.12.2016
- Plastics Processing
Continuation of the article p. Lubomir Zeman dated December 22,...
-
PF 2017
To all our readers and business partners we appreciate your cooperation in the past year and the new year good luck, health, personal and professional...
-
Feasibility study and manufacture of injection molded thermoplastics, Part 2
- 22.12.2016
- Plastics Processing
Continuation of the article p. Lubomir Zeman dated December 15,...
-
Preparing for Industrial Fairs Prague 2017 - be there!
- 21.12.2016
- Services
Becoming a tradition, the second week of May is held an exhibition at the PVA EXPO PRAHA for the products, machines and latest technology in mechanical engineering, logistics and energy. On 9 to 12 May 2017, will be held Industrial Fairs Prague and organizers for exhibitors and visitors are already...
-
Apparatus for testing the integrity of surface offers TITAN Multiplast s.r.o.
- 20.12.2016
- Machinery & Equipment
- Quality control
Apparatus from british company Buckleys can be successfully used for the control membrane, membrane film to the bridge structure, the insulating film, but also the weld or controlling the...
-
Not be afraid of Lean Administration and Master study FAQ
- 19.12.2016
- Services
- Cost savings
In February opens IPA Slovakia second year of Master study lean administration. Some questions about the course and the schedule of prospective students are repeated, so the author decided to write this article. The questions are divided into three areas. Perhaps the answer will also help you in...
-
Feasibility study and manufacture of injection molded thermoplastics, Part 1
- 15.12.2016
- Plastics Processing
Injection molding has long been the most widely used technologies for the production of plastic parts for all industries. Its meaning and application is constantly increasing, mainly related to the development of the automotive industry, electronics, telecommunications technology, the production of...
-
Anti-draft curtains of soft PVC from TITAN - Tatraplast Ltd.
The striped curtains of soft PVC are used as anti-draft curtains, reducing heat loss in winter, limiting the leakage of cold from the freezer cabinets, preventing dust entering to the building and can serve as an additional source of...
-
GF Machining Solutions: Cut your work pieces faster than your competitors!
- 12.12.2016
- Machinery & Equipment
- Peripherals
The new electro-wire cutting machines labeled CUT E350 and CUT E600 are designed to significantly increase production capacity while maintaining the quality requirements of the areas cultivated. Technology oriented for cutting speed are now more productive and deliver customer financial...
-
MALOUN s.r.o. company expand production of granulates
- 08.12.2016
- Plastics recycling
- Recycled plastics
Regranulates production of standard quality raw materials is one of the priorities of capacity utilization regranulation lines in the company MALOUN sro in Zlin. Direct treatment or by adding a percentage (15-35%) granulate is a real saving on material inputs (costs) of conservation of mechanical...
-
The countdown to reduce the use of plastic bags has started!
- 07.12.2016
- Plastics packaging
- Waste Management
In view of tackling resource waste and littering, EU governments have until 27 November 2016 to adopt measures to cut the consumption of lightweight plastic carrier bags, and inform the European Commission about it. This is required by the EU Plastic Bags Directive. It obliges Member States to...
-
Report of the sixth year of the seminar Trends in the plastics industry
- 06.12.2016
- Services
Slovak plastics cluster (SPK) organized seminar of the trends in the plastics industry on 5th December 2016 in Nitra. The participants acquired knowledge of the latest technology of plastics processing and new practical information related to the tools, moulds and...
-
The Jupiter II from Haitian has proven its value
- 05.12.2016
- Machinery & Equipment
As a T1 supplier, Reydel Automotive Slovakia s.r.o. specializes in high-quality interior components, mainly for cockpits. Their production range extends from instrument panels to ventilation systems and even door trim. We spoke with Milan Večera, Manufacturing Manager at Reydel in Nitra,...
-
Company BOCO PARDUBICE presents new hydraulic molds opener
Hydraulic molds opener suitable for plastic processors that has a lack production capacity and where is frequent exchange of injection molds and wherever it is necessary to implement the molds service, such as conservation, cleaning, repair and so...
-
The GRAFE GROUP has developed halogen-free, flame-retardant polypropylene compounds
The plastics experts at GRAFE are introducing a halogen flame retardant PP compound, which can be colored as desired. "Our goal was to develop a material that offers halogen-free, flame-retardant and good mechanical properties along with good flowability and the possibility of free coloration,"...
-
K 2016: a resounding success for ENGEL
Thanks to a wealth of innovation, a positive climate for investment and enthu-siastic attendees, the K 2016 fair was a resounding success for ENGEL AUSTRIA. inject 4.0 – ENGEL’s answer to the challenges of the fourth industrial revolution – played a key role in this achievement. Furthermore, topics...
-
Special offer strapping machines by Penta - Service
- 24.11.2016
- Machinery & Equipment
- Packaging
From 22nd November to 31st December 2016 you can buy selected strapping machines at great...
-
World premiere at the K 2016: Hybrid Allrounder with a clamping force of 6,500 kN
- 22.11.2016
- Machinery & Equipment
- Injection molding machines
Arburg has pulled off an unprecedented and unique triple coup at the K 2016 with the world premiere of the hybrid Allrounder 1120 H – a new machine size in a new design with the new Gestica control...
-
Ter Hell Plastics - The project technology initiative with long fibers thermoPRE® Chemnitz University of Technology
- 21.11.2016
- Plastics Processing
Sample device for producing thermoplastic fiber-reinforced prepregs, which was developed regional development center thermoPRE® enters the trial...
-
Synventive Announces the SVG+, the New Standard for Sequential Valve Gate Molding
- 16.11.2016
- Plastics Moulds
- Hot runners
SVG+ systems boast the latest patented hot runner advancements, providing the optimum and most reliable molding solution for large part...
-
The awards in the National prices for the quality of SR 2016 and SR National Award for Corporate Social Responsibility 2016
The second week of the November each year is declared by the European Organisation for Quality as an European quality week, when attention in all European countries draws on various events and conferences in the field of quality. To this tradition was for several years and connects the Slovak...
-
MOL Group announced its financial and operational targets for 2017-2021
- 14.11.2016
- Suppliers of raw materials
- Business economics
After publication of the strategy "MOL Group 2030 - Enter Tomorrow " Today MOL Group announced its financial and operational targets for the next five...
Branch Dictionary
