Trhové ceny komoditných plastov týždenne
Uvádzame tu trhové ceny rôznych typov komoditných plastov PE-LD, PE-HD, PP a PS v strednej a východnej Európe s oneskorením 5 týždňov. Údaje spracoval náš partner myCEPPI.
Zaujímajú Vás aktuálne ceny komoditných plastov? Objednajte si túto službu Týždenné ceny komoditných plastov u nás v redakcií.
Ceny na týždeň 3/2020
The market is slowly awakening
The following factors influenced “commodity” polymer prices and price expectations last week:
- BRENT oil price 64.62 USD/barrel, slightly dropping prices
- EUR/USD: 1,1127, a stagnant Euro
- NAPHTHA (European): 542.37 USD/t, slowly further increasing prices
- Restrained demand,
- Spot items from December are being slowly sold out,
- Less North American goods on the market,
2020 is starting slowly. Converters are still looking for cheaper and cheaper prices. Demand for the time being is subdued. In the first half of January, there was still a large amount of cheap merchandise at traders left over from December. However, they are slowly running out. Significant volumes of non-European and Russian imports are available only in Poland. So far, the production of new capacities (1.5 million tons PE, 0.5 million tons PP) commissioned last year at SIBUR has not yet reached the Central European market. So far, only PE (HD/LD) comes from Russia in quantities of 1-2,000 tons, but almost exclusively to Poland. Significant import volumes are expected from February.
Converters expect that there will be cheap imports of PE. The problem is that this is coupled with the expectation of cheap prices as well. This means that North American, Russian and other imported PEs should be 30-50 € cheaper than European PEs. With the current logistical solutions, this is difficult to accomplish, since the bulk of polymer imports arrive in Northwest European ports and the cost of land transport is significant. Only SIBUR's new rail logistics solution appears to be competitive, providing a direct arrival in Central Europe.
Although there was typically a roll-over in case of PE. However, spot polyethylene prices in January suffered a lower average drop of € 10-15 in Central Europe. While PP prices remained rather stable and rose to a lesser extent in case of some producers. However, cheap PPC stocks carried over from December lowered converters' price expectations. But these are largely gone.
NAPHTHA prices continue to rise slightly, with a slight increase in monomer prices likely in February. This may provide a good basis for raising the price of polyolefin grades produced in Europe.
PS market is characterized by low supply. Price increases have only partially passed through, despite converters expecting further price increases. Imports from outside of Europe remain low.
Polyolefin grades
LDPE prices were in a range of 860-980 €/t last week in Central-Europe. Although the price range seems to be unchanged, average prices have dropped by 10-20 €. This is because one of the biggest players in the European market has plowed the market with cheap prices of 890-920 €/t. Imports of LDPE are mainly in Poland from Russian sources, typically at a price level of 880-910 €/t. Its amount is not significant yet.
Typical HDPE prices were in a range of 905 - 1,020 €/t in Central Europe last week. However, due to North American and Russian goods, the total price range is 850-1,020 €/t, but there is no significant quantity behind cheap goods. Typical prices for each HDPE grade were as follows:
- HDPE BM 900-1,020 €/t,
- HDPE IM prices 910-1,020 €/t,
- HDPE FILM grades 900-1,010 €/t,
The cheapest prices are typically less than € 900, but they are all associated with non-European and Russian imports, and there is little commodity base behind the offers.
Typical HDPE (100) prices were in a range of 1,120-1,210 €/t last week. Unchanged prices provide little incentive for buyers to buy. In the lowest price range there are prices below 1,100, but the price level is not significant due to small quantities.
LLDPE C4 prices were in a range of 890-980 €/t last week, depending on the grade and application area. Prices below € 900 mainly cover North American imports.
mLLDPE (C6) prices were in a range of 1,020-1,160 €/t last week. They did not change. Slowly increasing demand and plentiful supply are characteristic of the market.
Demand for PPH is generally not bad. Supply is good. Smaller PPH manufacturers still have stocks. However, if demand may continue to pick up, then shortage of smaller grades might develop easily, as Russian imports are missing from the markets and there is only a low quantity on the spot markets.
Typical PPH Raffia prices were in a range of 900-1,030 €/t last week. They did not change. Demand is slightly weaker than average.
The price of PPM IM non-special products with medium melt index was in a range of 900-1,030 €/t last week. Demand is not bad. Larger manufacturers mostly sold their January volumes. For the time being there is a shortage of demand in the spot markets, which also affects the Serbian PP producer. The PP producers in the SCE region are the cheapest. The price of products with high flow index was in a range of € 1,000 - € 1,090/t. The bottom of the price band shifted upwards.
Typical PPC prices ranged from 1,040 to 1,180 €/t in Central Europe. However, the commodities are slowly running out from the price band of € 1,040 -1,050/t. Due to uncertainties in the automotive industry, we continue to expect weak demand, especially for products with a high flow index.
PPR prices were in a range of 1,100-1,220 €/t last week. Basically a roll-over happened. Demand is low. For the time being, pipe producers are buying little.
The typical prices of the last week are presented in the table below (full truck load 20-22.5 t):
Grade name | Typical polymer price ranges in the third week of January 2020, Central Europe (€/ton) |
HDPE BM | 910-980 |
HDPE Film | 900-990 |
HDPE IM | 900-1020 |
HDPE Pipe (100) | 1120-1210 |
LDPE Film | 860-1000 |
LDPE GP | 890-1000 |
LLDPE C4 | 900-980 |
mLLDPE C6 | 1020-1160 |
PPC | 1040-1180 |
PPH IM | 900-1020 |
PPH IM HMFR | 980-1080 |
PPH Raffia | 900-1030 |
PPR | 1100-1220 |
GPPS | 1100-1200 |
HIPS | 1200-1300 |
EPS | 1080-1140 |
ABS | 1380-1600 |
Polystyrene grades
Typical EPS prices were in a range of 1,080-1,130 €/t last week. Demand is weak, typically selling in the range of 1,080-1,110 €/t. Although the Central European construction industry is looking forward to a good year in 2020, the start of the season is far from over. In this way converters are cautious. For the most part, everyone buys only enough to cover their daily production needs.
Typical GPPS prices were in a range of 1,100-1,185 €/t, while HIPS prices were in a range of 1,200-1,275 €/t. Producers have somewhat let go of their earlier price increases. Prices were raised by around € 50. Demand is low at the present. There is no imported product from outside Europe on the market.
Typical natural ABS prices were in the price range of 1,380-1,630 € last week. The € 50 increase also seems to have failed due to market oversupply and weak demand. However, black fiberglass ABS is in good demand. This indicates that component manufacturers are looking forward to 2020 with confidence.
Typ | Cena |
---|---|
HDPE blow molding | 954 € / t |
HDPE film | 958 € / t |
HDPE injection molding | 960 € / t |
HDPE pipe (100) | 1163 € / t |
LDPE film | 944 € / t |
LDPE general purpose | 949 € / t |
PP co-polymer injection molding | 1103 € / t |
PP homo-polymer fiber | 968 € / t |
PP homo-polymer injection molding | 981 € / t |
PPR | 1155 € / t |
GPPS | 1132 € / t |
HIPS | 1255 € / t |
EPS | 1106 € / t |
myCEPPI - nový prístup v poradenstve a v spravodajstve v oblasti plastov. Poskytneme Vám detailný, aktuálny a na mieru vytvorený obraz o trhu s plastami v strednej a východnej Európe.
Vychádzame z našich osobných a pevných vzťahoch s významnými hráčmi v plastikárskom priemysle v strednej a východnej Európe. Každý mesiac uskutočňujeme stovky osobných a telefonických hovorov so spracovateľmi plastov, distribútormi a výrobcami surovín, zúčastňujeme sa odborných veľtrhov a konferencií.
Informácie, ktoré zhromažďujeme v rámci tohto procesu, tvoria základ našich týždenných cenových reportov komoditných plastov. Obsahujúce taktiež analýzu trhu. Tieto reporty taktiež slúžia ako východiskový bod pre naše ďalšie konzultačné služby ktoré poskytujeme spoločnostiam, ktoré potrebujú pomoc pri vstupe na trh, prípadne pri rozširovaní svojho biznisu, zorientovaní sa v situácií na trhu, atď. Naši odborníci majú desiatky rokov skúseností s plastami.
Radi Vám poskytneme naše služby.
História cien
- 2024:
- 2023:
- 2022:
- 2021:
- 2020:
- 2019:
- 2018:
- 2017:
Najnovšie inzeráty
-
03.05.2024 | ID: 202419068
Top inzerát Spolupráca: Voľné výrobné kapacity na vstrekolisoch a extruznej linke 950T, 1300T, 2700T
04.04.2024 | ID: 202418891
Top inzerát-
16.05.2024 | ID: 202419163
-
16.05.2024 | ID: 202419161
Kúpim: Plastový odpad z výroby
15.05.2024 | ID: 202419160
Predám: PA6.6.-GF, originálne materiály
14.05.2024 | ID: 202419158
Predám: HDPE fólia v rolkách 30 t
13.05.2024 | ID: 202419156
Predám: PA 6.6 Ultramid A3U42G6 drť
13.05.2024 | ID: 202419155
Predám: Farebné masterbatche na LLDPE nosiči
13.05.2024 | ID: 202419154
-
16.05.2024 | ID: 202419161
Kúpim: Plastový odpad z výroby
15.05.2024 | ID: 202419160
Kúpim: Balíková LDPE fólia ,500 t/mesiac
13.05.2024 | ID: 202419149
Kúpim: Špinavý zvyškový granulát z podláh
13.05.2024 | ID: 202419147
-
13.05.2024 | ID: 202419142
-
07.05.2024 | ID: 202419102
-
07.05.2024 | ID: 202419101
-
26.04.2024 | ID: 202419032
-
17.04.2024 | ID: 202418988
-
03.05.2024 | ID: 202419068
Top inzerát -
16.05.2024 | ID: 202419163
Predám: PA6.6.-GF, originálne materiály
14.05.2024 | ID: 202419158
Predám: HDPE fólia v rolkách 30 t
13.05.2024 | ID: 202419156
Predám: PA 6.6 Ultramid A3U42G6 drť
13.05.2024 | ID: 202419155
Predám: Farebné masterbatche na LLDPE nosiči
13.05.2024 | ID: 202419154
Predám: Absorbér vlhkosti (Desiccant) 200 t každý mesiac
13.05.2024 | ID: 202419153
Predám: Plnivo - filler masterbatch 100 t každý mesiac
13.05.2024 | ID: 202419152
Predám: PE, PP, POM, PC, PVC, PC/ABS drť
13.05.2024 | ID: 202419151
Najbližšie výstavy
MSV Nitra 2024, Medzinárodný strojársky veľtrh Nitra
21.05.2024 - 24.05.2024 | Nitra
21.05.2024 - 24.05.2024 | Kielce
International Technics Fair 2024
21.05.2024 - 24.05.2024 | Belehrad
28.05.2024 - 07.06.2024 | Düsseldorf
28.05.2024 - 30.05.2024 | Kyiv
04.06.2024 - 07.06.2024 | Wels
04.06.2024 - 07.06.2024 | Lyon
04.06.2024 - 06.06.2024 | Štuttgart
04.06.2024 - 07.06.2024 | Buenos Aires
15.05.2024
MSV Nitra 2024, Medzinárodný strojársky veľtrh Nitra
21.05.2024
21.05.2024
International Technics Fair 2024
21.05.2024
28.05.2024
15.05.2024
16.05.2024
16.05.2024
Seminár o vstrekovaní plastov pre technológov a nastavovačov I
20.05.2024
20.05.2024
Ponuky práce
Kontrolór kvality - ULSTRUP PLAST s.r.o.
17.05.2024
Lisár/lisárka - DIXI, výroba plastových obalov a.s.
17.05.2024
Špecialista rozvoja dodávateľov - HYDAC Electronic, s.r.o.
13.05.2024
Obchodný zástupca - špecialista predaja - Plastcom, spol. s r.o.
09.05.2024
CNC frézar/-ka senior v kusovej výrobe - Branson Ultrasonics, a.s.
09.05.2024
Nastavovač vstrekolisov - BOURBON AP Nitra, s.r.o.
09.05.2024
Vedúci oddelenia vstrekolisov a nástrojárne - Xinquan Slovakia Automotive Trim s.r.o.
29.04.2024
Nastavovač vstrekolisov - Tristone Flowtech Slovakia s.r.o.
11.04.2024
Plastikár, lepiaci personál - FORM s.r.o.
10.04.2024