Trhové ceny komoditných plastov týždenne
Uvádzame tu trhové ceny rôznych typov komoditných plastov PE-LD, PE-HD, PP a PS v strednej a východnej Európe s oneskorením 5 týždňov. Údaje spracoval náš partner myCEPPI.
Zaujímajú Vás aktuálne ceny komoditných plastov? Objednajte si túto službu Týždenné ceny komoditných plastov u nás v redakcií.
Ceny na týždeň 50/2018
The following factors influenced “commodity” polymer prices and price expectations last week:
- BRENT oil price 61.67 USD/barrel, increasing prices compared to last week,
- EUR/USD: 1.1411, Euro getting stronger
- NAPHTHA: 479,00 USD/t, decreasing prices
- low PE and high PPH and PS demand during the last week of November
- dropping contracted monomer prices
- Ethylene (C2) contractual price in December: 1,025 EUR/t, -110 €/t drop
- Ethylene (C3) contractual price in December: 960 EUR/t, -100 €/t drop,
- Styrene monomer (SM) contracted price 990 EUR/t, -150 €/t drop,
Company name | Site | Product manufactured | Annual capacity (kt) | Shutdown period |
Karpatneftekhim | Kalush | HDPE | 107 | November 20, 2018 |
The price of polyolefin grades dropped. Producer prices dropped by 50-80 €, depending on the grade and application area. The price reduction was not proportional. The prices in the lower end of the price range dropped by 20-30 € and those in the higher end by 60-80 €. LDPE had the smallest space for price change, here the bottom line of the price range dropped by some 20 €, while top prices dropped by even as much as 50. Decreasing prices did not boost demand significantly. Only PPH demand is high. The mood of the market is basically characterized by December. The week ahead can be regarded as a week of full value in terms of demand, and most market players will slowly come to a halt. The market is expected to restart as of January 7. Because of this and due to the price reduction expectations just a few plan to purchase higher quantities at the end of the year. In this way it is possible that in December producers will decrease prices slightly. The real question is how prices will change in January. The present expectations imply price reduction, but oil prices came to a turn this week, and this will probably also be followed by NAPHTHA.
In case of SM we did not expect major changes in December, in spite of this prices decreased dramatically, last time there were prices below 1,000 €/t three years ago. SM volatility is high, in this way prices will shortly start increasing. PS demand was high last month as well and increased further as a result of the price reduction. But European producers surprisingly sold everything within one week. Materials are no longer available, producers accept no more orders for December. From the SM price reduction (320 Euro) of the last 2 months polymer producers passed on an average 200-230 € to converters. Traders are searching for import sources from outside of Europe, they buy significant quantities on the present price level. This might curb the probably steep price increase in January-February.
In detail
Polyolefin grades
Typical LDPE prices were in a range of 1,020-1,120 €/t last week. This means a price drop by about 10-50 €. Polymer producers who kept their prices high so far were forced to make a major price sacrifice. The demand is slightly lower than moderate, in line with the season. But after December 15 a major fallback is to be expected in trade. This might result in a further price drop affecting first of all the top of the price range.
HDPE prices dropped by 50-70 €, depending on the grade and application area. In Central Europe the typical prices were in a range of 1,100-1,210 €/t last week. HDPE IM prices in a range of 1,010-1,180 €/t were lowest, in case of some major buyers prices were even below 1,100 €. HDPE Film and BM prices are in a range of 1,120-1,210 €. The demand is in line with the season. There are no major end-of-the-year purchases. Smaller, first of all “campaign” price reductions are still possible, but we expect no major price drop in December.
The HDPE (100) season has ended, demand is low. The monomer price reduction was followed by a polymer price drop by 70-80 Euro, the typical price range is 1,270-1,340 €/t in December.
LLDPE C4 prices have dropped slightly, there was a price reduction by only 10-20 € in total. The typical price range was 1,050 - 1,140 €/t. Buyers would love LLDPE to follow the general price tendency. Yet the monomer price drop in Europe does not really affect LLDPE prices. Demand is still good. In December we anticipate no significant further price change.
mLLDPE prices were in a range of 1,220-1,380 €/t last week. There was only a minor price change by 20-30 €. Demand is still good at the present.
PPH prices dropped by 20-80 Euro last week, they were in a range of 1,150-1,280 €/t. CE PPH raffia prices were in a range of 1,150-1,210 €/t. The price of non-special PPM IM products with medium melt index came to be more narrow, the price range was 1,170-1,230 €/t. The prices of products with high melt index were in a range of 1,220-1,280 €/t last week. Demand is high, which is first of all due to the short supply. We anticipate stable prices in December. There is no sign of further price drop in sight.
Typical prices of PPC grades were in a range of 1,250-1,340 €/t in Central-Europe last week. This practically in accordance with the price level at the end of November. Demand is low and will probably drop further as of the middle of December. Minor “price reduction campaign” by the polymer producers can be expected during the last third of December.
The PPR price range was 1,280-1,400 €/t, depending on the grade, producer and application area last week. There was a price drop by about 40-80 €. The demand, that for pipe grades in particular is low and is getting lower.
The prices to be expected during the first week of December are presented in the table below (full truck load 20-22.5 t):
Grade name | Typical polymer price ranges in the first week of December, 2018, Central Europe (€/ton) |
HDPE BM | 1,110-1,220 |
HDPE Film | 1,120-1,220 |
HDPE IM | 1,100-1,180 |
HDPE Pipe (100) | 1,280-1,350 |
LDPE Film | 1,020-1,120 |
LDPE GP | 1,020-1,120 |
LLDPE C4 | 1,040-1,140 |
PPC | 1,250-1,380 |
PPH IM | 1,170-1,280 |
PPH Raffia | 1,150-1,220 |
PPR | 1,280-1,400 |
GPPS | 1,200-1,260 |
HIPS | 1,210-1,290 |
EPS | 1,260-1,370 |
Polystyrene grades
The end of the season and dropping demand resulted in major price reduction also in December, prices dropped by 120-140 €. Polymer producers, anticipating low demand in January try selling everything now. Last week in Central Europe EPS prices were in a range of 1,260-1,370 €/t.
The demand for GPPS and HIPS is still very high. But producers, by referring to lacking inventories, do not accept further orders. Prices dropped further. The typical GPPS price range was 1,200-1,260 €. HIPS prices were in a range of 1,210-1,290 €. “Order stop” continues in Europe. “Free trade” was practically possible for one week. Plastic converters and PS distributors outside of Europe try purchasing still in December at low prices.
We will publish the last price report this year on December 17. The first price report of 2019 will be published on January 7.
Typ | Cena |
---|---|
HDPE blow molding | 1153 € / t |
HDPE film | 1153 € / t |
HDPE injection molding | 1152 € / t |
HDPE pipe (100) | 1345 € / t |
LDPE film | 1073 € / t |
LDPE general purpose | 1057 € / t |
PP co-polymer injection molding | 1273 € / t |
PP homo-polymer fiber | 1206 € / t |
PP homo-polymer injection molding | 1210 € / t |
PPR | 1335 € / t |
GPPS | 1226 € / t |
HIPS | 1245 € / t |
EPS | 1315 € / t |
myCEPPI - nový prístup v poradenstve a v spravodajstve v oblasti plastov. Poskytneme Vám detailný, aktuálny a na mieru vytvorený obraz o trhu s plastami v strednej a východnej Európe.
Vychádzame z našich osobných a pevných vzťahoch s významnými hráčmi v plastikárskom priemysle v strednej a východnej Európe. Každý mesiac uskutočňujeme stovky osobných a telefonických hovorov so spracovateľmi plastov, distribútormi a výrobcami surovín, zúčastňujeme sa odborných veľtrhov a konferencií.
Informácie, ktoré zhromažďujeme v rámci tohto procesu, tvoria základ našich týždenných cenových reportov komoditných plastov. Obsahujúce taktiež analýzu trhu. Tieto reporty taktiež slúžia ako východiskový bod pre naše ďalšie konzultačné služby ktoré poskytujeme spoločnostiam, ktoré potrebujú pomoc pri vstupe na trh, prípadne pri rozširovaní svojho biznisu, zorientovaní sa v situácií na trhu, atď. Naši odborníci majú desiatky rokov skúseností s plastami.
Radi Vám poskytneme naše služby.
História cien
- 2024:
- 2023:
- 2022:
- 2021:
- 2020:
- 2019:
- 2018:
- 2017:
Najnovšie inzeráty
-
03.05.2024 | ID: 202419068
Top inzerát Spolupráca: Voľné výrobné kapacity na vstrekolisoch a extruznej linke 950T, 1300T, 2700T
04.04.2024 | ID: 202418891
Top inzerát-
16.05.2024 | ID: 202419163
-
16.05.2024 | ID: 202419161
Kúpim: Plastový odpad z výroby
15.05.2024 | ID: 202419160
Predám: PA6.6.-GF, originálne materiály
14.05.2024 | ID: 202419158
Predám: HDPE fólia v rolkách 30 t
13.05.2024 | ID: 202419156
Predám: PA 6.6 Ultramid A3U42G6 drť
13.05.2024 | ID: 202419155
Predám: Farebné masterbatche na LLDPE nosiči
13.05.2024 | ID: 202419154
-
16.05.2024 | ID: 202419161
Kúpim: Plastový odpad z výroby
15.05.2024 | ID: 202419160
Kúpim: Balíková LDPE fólia ,500 t/mesiac
13.05.2024 | ID: 202419149
Kúpim: Špinavý zvyškový granulát z podláh
13.05.2024 | ID: 202419147
-
13.05.2024 | ID: 202419142
-
07.05.2024 | ID: 202419102
-
07.05.2024 | ID: 202419101
-
26.04.2024 | ID: 202419032
-
17.04.2024 | ID: 202418988
-
03.05.2024 | ID: 202419068
Top inzerát -
16.05.2024 | ID: 202419163
Predám: PA6.6.-GF, originálne materiály
14.05.2024 | ID: 202419158
Predám: HDPE fólia v rolkách 30 t
13.05.2024 | ID: 202419156
Predám: PA 6.6 Ultramid A3U42G6 drť
13.05.2024 | ID: 202419155
Predám: Farebné masterbatche na LLDPE nosiči
13.05.2024 | ID: 202419154
Predám: Absorbér vlhkosti (Desiccant) 200 t každý mesiac
13.05.2024 | ID: 202419153
Predám: Plnivo - filler masterbatch 100 t každý mesiac
13.05.2024 | ID: 202419152
Predám: PE, PP, POM, PC, PVC, PC/ABS drť
13.05.2024 | ID: 202419151
Najbližšie výstavy
MSV Nitra 2024, Medzinárodný strojársky veľtrh Nitra
21.05.2024 - 24.05.2024 | Nitra
21.05.2024 - 24.05.2024 | Kielce
International Technics Fair 2024
21.05.2024 - 24.05.2024 | Belehrad
28.05.2024 - 07.06.2024 | Düsseldorf
28.05.2024 - 30.05.2024 | Kyiv
04.06.2024 - 07.06.2024 | Wels
04.06.2024 - 07.06.2024 | Lyon
04.06.2024 - 06.06.2024 | Štuttgart
04.06.2024 - 07.06.2024 | Buenos Aires
15.05.2024
MSV Nitra 2024, Medzinárodný strojársky veľtrh Nitra
21.05.2024
21.05.2024
International Technics Fair 2024
21.05.2024
28.05.2024
15.05.2024
16.05.2024
16.05.2024
Seminár o vstrekovaní plastov pre technológov a nastavovačov I
20.05.2024
20.05.2024
Ponuky práce
Kontrolór kvality - ULSTRUP PLAST s.r.o.
17.05.2024
Lisár/lisárka - DIXI, výroba plastových obalov a.s.
17.05.2024
Špecialista rozvoja dodávateľov - HYDAC Electronic, s.r.o.
13.05.2024
Obchodný zástupca - špecialista predaja - Plastcom, spol. s r.o.
09.05.2024
CNC frézar/-ka senior v kusovej výrobe - Branson Ultrasonics, a.s.
09.05.2024
Nastavovač vstrekolisov - BOURBON AP Nitra, s.r.o.
09.05.2024
Vedúci oddelenia vstrekolisov a nástrojárne - Xinquan Slovakia Automotive Trim s.r.o.
29.04.2024
Nastavovač vstrekolisov - Tristone Flowtech Slovakia s.r.o.
11.04.2024
Plastikár, lepiaci personál - FORM s.r.o.
10.04.2024