Trhové ceny komoditných plastov týždenne
Uvádzame tu trhové ceny rôznych typov komoditných plastov PE-LD, PE-HD, PP a PS v strednej a východnej Európe s oneskorením 5 týždňov. Údaje spracoval náš partner myCEPPI.
Zaujímajú Vás aktuálne ceny komoditných plastov? Objednajte si túto službu Týždenné ceny komoditných plastov u nás v redakcií.
Ceny na týždeň 11/2017
Tieto faktory ovplyvnili ceny "komoditných "polymérov minulý týždeň:
- zníženie dopytu spracovateľov plastov
- cena ropy BRENT pod 55 dolármi
- chýbajúce množstvá importu (Blízky východ)
- silný ázijský dopyt
- celosvetový nárast v stavebníctve
- naďalej silný dolár
- kvôli slabému euru sú možnosti európskych výrobcov dobré
In detail:
The spring season started with a steep price increase. There is nothing surprising about it, because of the continuous price increase that started early January plastic converters resisted and started hard bargains in case of PP and PS in particular. In South-East Asia there is already some light at the end of the tunnel, there is a price reduction also in case of monomer and polymer prices. But the effect of this will be palpable in the prices in May at the earliest. For the time being we can see a minimum of import from overseas on the CE market. But on the other side the maintenance season in Europe has just started, spot monomer prices are increasing with the exception of SM prices.
Polyolefin grades
In case of LDPE the producers can sell best, who managed to keep their prices in a price range of 1,360-1,400 €. LDPE is basically in short supply in the region. But it is a good news that there is again LDPE from Rompetrol at FCA prices higher than 1,300 €. This is good news because of two things: the price follows the market and supply is growing.
In case of HDPE no miracles happened, construction seems to be starting in the countries where the season is not highly depending on the receipt of EU subsidies, in the northern and central sub region. The season has not started in Romania and Bulgaria yet. The reduced HDPE 100 pipe price range is 1,370-1,400 €. HDPE film and BM supply is good, the market accepted the 30-40 EUR price increase.
But the PP market is more complex. The high monomer price increase was followed by a price increase of C3 +30-40 EUR in case of some producers. Buyers were not willing to accept an 80-100 EUR price increase. According to the opinion of the converters a price increase by 50 EUR and the charging of the monomer price increase to the buyers is justified, but they cannot accept a price increase higher than this. The situation of PPC was particularly critical, where packaging material producers complained about prices higher than 1,330 €, in reality they were willing to buy higher amounts at prices of about 1,300 €. This in spite of the fact that PPC supply is short. The real PPC price range for a truckload is 1,290-1,320 EUR in the region. In case of PPH the situation is not that critical, as it was possible to buy PPH grades from Bulgaria and Romania at FCA prices of about 1,150 EUR, which means a delivery price below 1,200 EUR at any point of the region. In case of PPR a price increase by 70-80 EUR was typical, it was not possible here either to increase prices by 100 EUR.
The prices of the last weeks are presented in the table below:
Grade name | Polymer price ranges in March, 2017, Central Europe (€/ton) |
HDPE BM | 1,230-1,380 |
HDPE Film | 1,240-1,380 |
HDPE IM | 1,250-1,400 |
HDPE Pipe (100) | 1,310-1,430 |
LDPE Film | 1,360-1,430 |
LDPE GP | 1,360-1,430 |
PPC | 1,250-1,380 |
PPH IM | 1,180-1,260 |
PPH Raffia | 1,180-1,270 |
PPR | 1,325-1,420 |
GPPS | 1,750-1,820 |
HIPS | 1,850-2,030 |
EPS | 1,670-1,750 |
Polystyrene grades
In case of PS, with smaller bargains, the price increase in March was accepted by the market. The reason is simple, EPS and HIPS supply is short, and GPPS supply is satisfactory. The price of EPS typically stabilized between 1,650-1,730 € in case of a full truck load. Supply is short, because of the start of the construction season demand is good. Converters rather accept the price increase instead of remaining without feedstock.
HIPS supply is very low, while there is normal demand on the market. Prices are typically in a range of 1,900-2,000 EUR in case of goods of European origin. Import supply is low.
In case of GPPS producers enforced a price increase higher than the monomer price increase. The only alternative for converters could be to curb their production. Though PP prices are extremely favorable now, but shifting is practically just a theoretic category. The prices of water clear GPPS is about 1,800 €.
There is an interesting situation unfolding on the polystyrene market. The Asian (Southeastern-Asian) styrene monomer (SM) prices have been dropping for two weeks. The increasing Asian prices are the primary driver of the significant SM and PS price increase in Europe. Not the situation seems to change. The question is when the decreasing price tendency will reach Europe. Like always also now everything depends on the monomer price. Expectedly in April the monomer prices will not drop, a reduced styrene monomer price can be expected in May at the earliest, depending on the supply.
As the price level is extremely high in case of all three grades, producers are under heavy pressure to reduce sale prices. Expectedly in May the first major overseas imported quantities will arrive. In this way by June at latest dropping prices can be anticipated.
Typ | Cena |
---|---|
HDPE blow molding | 1294 € / t |
HDPE film | 1282 € / t |
HDPE injection molding | 1300 € / t |
HDPE pipe (100) | 1346 € / t |
LDPE film | 1359 € / t |
LDPE general purpose | 1366 € / t |
PP co-polymer injection molding | 1314 € / t |
PP homo-polymer fiber | 1216 € / t |
PP homo-polymer injection molding | 1218 € / t |
PPR | 1387 € / t |
GPPS | 1735 € / t |
HIPS | 1840 € / t |
EPS | 1685 € / t |
myCEPPI - nový prístup v poradenstve a v spravodajstve v oblasti plastov. Poskytneme Vám detailný, aktuálny a na mieru vytvorený obraz o trhu s plastami v strednej a východnej Európe.
Vychádzame z našich osobných a pevných vzťahoch s významnými hráčmi v plastikárskom priemysle v strednej a východnej Európe. Každý mesiac uskutočňujeme stovky osobných a telefonických hovorov so spracovateľmi plastov, distribútormi a výrobcami surovín, zúčastňujeme sa odborných veľtrhov a konferencií.
Informácie, ktoré zhromažďujeme v rámci tohto procesu, tvoria základ našich týždenných cenových reportov komoditných plastov. Obsahujúce taktiež analýzu trhu. Tieto reporty taktiež slúžia ako východiskový bod pre naše ďalšie konzultačné služby ktoré poskytujeme spoločnostiam, ktoré potrebujú pomoc pri vstupe na trh, prípadne pri rozširovaní svojho biznisu, zorientovaní sa v situácií na trhu, atď. Naši odborníci majú desiatky rokov skúseností s plastami.
Radi Vám poskytneme naše služby.
História cien
- 2024:
- 2023:
- 2022:
- 2021:
- 2020:
- 2019:
- 2018:
- 2017:
Najnovšie inzeráty
-
03.05.2024 | ID: 202419068
Top inzerát Spolupráca: Voľné výrobné kapacity na vstrekolisoch a extruznej linke 950T, 1300T, 2700T
04.04.2024 | ID: 202418891
Top inzerát-
16.05.2024 | ID: 202419163
-
16.05.2024 | ID: 202419161
Kúpim: Plastový odpad z výroby
15.05.2024 | ID: 202419160
Predám: PA6.6.-GF, originálne materiály
14.05.2024 | ID: 202419158
Predám: HDPE fólia v rolkách 30 t
13.05.2024 | ID: 202419156
Predám: PA 6.6 Ultramid A3U42G6 drť
13.05.2024 | ID: 202419155
Predám: Farebné masterbatche na LLDPE nosiči
13.05.2024 | ID: 202419154
-
16.05.2024 | ID: 202419161
Kúpim: Plastový odpad z výroby
15.05.2024 | ID: 202419160
Kúpim: Balíková LDPE fólia ,500 t/mesiac
13.05.2024 | ID: 202419149
Kúpim: Špinavý zvyškový granulát z podláh
13.05.2024 | ID: 202419147
-
13.05.2024 | ID: 202419142
-
07.05.2024 | ID: 202419102
-
07.05.2024 | ID: 202419101
-
26.04.2024 | ID: 202419032
-
17.04.2024 | ID: 202418988
-
03.05.2024 | ID: 202419068
Top inzerát -
16.05.2024 | ID: 202419163
Predám: PA6.6.-GF, originálne materiály
14.05.2024 | ID: 202419158
Predám: HDPE fólia v rolkách 30 t
13.05.2024 | ID: 202419156
Predám: PA 6.6 Ultramid A3U42G6 drť
13.05.2024 | ID: 202419155
Predám: Farebné masterbatche na LLDPE nosiči
13.05.2024 | ID: 202419154
Predám: Absorbér vlhkosti (Desiccant) 200 t každý mesiac
13.05.2024 | ID: 202419153
Predám: Plnivo - filler masterbatch 100 t každý mesiac
13.05.2024 | ID: 202419152
Predám: PE, PP, POM, PC, PVC, PC/ABS drť
13.05.2024 | ID: 202419151
Najbližšie výstavy
MSV Nitra 2024, Medzinárodný strojársky veľtrh Nitra
21.05.2024 - 24.05.2024 | Nitra
21.05.2024 - 24.05.2024 | Kielce
International Technics Fair 2024
21.05.2024 - 24.05.2024 | Belehrad
28.05.2024 - 07.06.2024 | Düsseldorf
28.05.2024 - 30.05.2024 | Kyiv
04.06.2024 - 07.06.2024 | Wels
04.06.2024 - 07.06.2024 | Lyon
04.06.2024 - 06.06.2024 | Štuttgart
04.06.2024 - 07.06.2024 | Buenos Aires
15.05.2024
MSV Nitra 2024, Medzinárodný strojársky veľtrh Nitra
21.05.2024
21.05.2024
International Technics Fair 2024
21.05.2024
28.05.2024
15.05.2024
16.05.2024
16.05.2024
Seminár o vstrekovaní plastov pre technológov a nastavovačov I
20.05.2024
20.05.2024
Ponuky práce
Kontrolór kvality - ULSTRUP PLAST s.r.o.
17.05.2024
Lisár/lisárka - DIXI, výroba plastových obalov a.s.
17.05.2024
Špecialista rozvoja dodávateľov - HYDAC Electronic, s.r.o.
13.05.2024
Obchodný zástupca - špecialista predaja - Plastcom, spol. s r.o.
09.05.2024
CNC frézar/-ka senior v kusovej výrobe - Branson Ultrasonics, a.s.
09.05.2024
Nastavovač vstrekolisov - BOURBON AP Nitra, s.r.o.
09.05.2024
Vedúci oddelenia vstrekolisov a nástrojárne - Xinquan Slovakia Automotive Trim s.r.o.
29.04.2024
Nastavovač vstrekolisov - Tristone Flowtech Slovakia s.r.o.
11.04.2024
Plastikár, lepiaci personál - FORM s.r.o.
10.04.2024