Trhové ceny komoditných plastov týždenne
Uvádzame tu trhové ceny rôznych typov komoditných plastov PE-LD, PE-HD, PP a PS v strednej a východnej Európe s oneskorením 5 týždňov. Údaje spracoval náš partner myCEPPI.
Zaujímajú Vás aktuálne ceny komoditných plastov? Objednajte si túto službu Týždenné ceny komoditných plastov u nás v redakcií.
Ceny na týždeň 51/2018
The following factors influenced “commodity” polymer prices and price expectations last week:
- BRENT oil price 60.28 USD/barrel, decreasing prices compared to last week,
- EUR/USD: 1.1301, EURO getting weaker
- NAPHTHA: 474.23 USD/t, decreasing prices
- low demand in case of all products,
- dropping spot monomer olefin and increasing SM prices
- Ethylene (C2) spot price (December 14 FDNWE): 770 EUR/t,
- Propylene (C3) spot price (December 14 FDNWE): 870 EUR/t,
- Styrene monomer (SM) spot price (December 14 FOB Rotterdam): 955 USD/ton
For the time being oil price is still low and the price of NAPHTHA has dropped slightly. As a result of the reduction of oil production prices will expectedly start rising again. But the spot price of olefin monomer grades has slightly dropped further. Demand came to be much weaker last week, in spite of the low prices there were just a few buyers. The uncertainty linked to next year seems to retain converters from major purchases. Polyolefin producers reduced their prices in a disciplined way, almost unanimously by 50-70 Euro. In this way, by the end of the year price ranges came to be more consistent. For the time being no major producer prepares for clearance sale and price reduction at the end of the year. Though for the time being, due to the cheap oil integrated margins are very attractive for polymer producers with integrated refinery. In this way, even in case of a minor price cut by 20-30 Euro they could still make reasonable profits. We expect a silent end of the year and a slow start next year. Most polymer producers will probably announce their prices as late as on about the 7th January.
In case of SM spot prices have started climbing, prices increased by 20 USD within one week. This is probably a sign for new upward price tendencies. During the next 2 weeks ahead until Xmas still many things might happen. With the exception of cheaper GPPS (1,220 €) there is almost no demand. The weather getting more and more wintery has almost cut off EPS demand as well, and the new EU regulation has a heavy impact on HIPS demand.
In detail
Polyolefin grades
Typical LDPE prices were in a range of 1,020-1,120 €/t last week. Did not change compared to last week. Demand is low, in line with the season. And keeps dropping further. it is almost impossible to sell at prices higher than 1,120 €. In this way traders who have dead inventories from previous months are in trouble. A minor end-of-the-year price reduction by 10-15 € is possible until the end of December, but the demand is not expected to liven up significantly because of this.
HDPE prices are surprisingly consistent. There is no major difference in the prices of local producers. In Central Europe the typical prices were in a range of 1,100-1,210 €/t last week. HDPE IM prices are in a range of 1,010-1,180 € and HDPE Film and BM prices are in a range of 1,120-1,210 €. Demand is low.
In December the typical price range of HDPE (100) is 1,270-1,340 €/t. Demand is low. For the time being converters do not consider major pre-purchases at the end of the year.
The typical LLDPE C4 price range was 1,050 - 1,140 €/t. Because of the USD getting stronger a major price drop similar to that of other polyolefin grades is not probable. Demand is getting weaker continuously.
mLLDPE prices were in a range of 1,220-1,380 €/t last week. Demand is low.
PPH prices were in a range of 1,150-1,280 €/t last week. Prices did not drop. Demand is good, cheaper grades from Romania and Serbia sell very well. CE PPH raffia prices were in a range of 1,150-1,210 €/t. The price range of non-special PPM IM products with medium melt index was 1,150-1,240 €/t. The prices of products with high melt index were in a range of 1,210-1,280 €/t last week. Prices are stable. They are also expected to remain stable until the end of the year.
Typical prices of PPC grades were in a range of 1,240-1,340 €/t in Central-Europe last week. Polymer producers did not reduce their prices to the same extent, yet the price range remained unchanged. Demand is good, first of all in the price category below 1,300 €. On this price level it is already reasonable to buy, even in advance.
The PPR price range was 1,280-1,400 €/t, depending on the grade, producer and application area last week. Demand is low.
The prices to be expected during the first week of December are presented in the table below (full truck load 20-22.5 t):
Grade name | Typical polymer price ranges in the second week of December, 2018, Central Europe (€/ton) |
HDPE BM | 1,110-1,220 |
HDPE Film | 1,120-1,220 |
HDPE IM | 1,100-1,180 |
HDPE Pipe (100) | 1,280-1,350 |
LDPE Film | 1,020-1,120 |
LDPE GP | 1,020-1,120 |
LLDPE C4 | 1,040-1,140 |
PPC | 1,240-1,380 |
PPH IM | 1,170-1,280 |
PPH Raffia | 1,150-1,220 |
PPR | 1,280-1,400 |
GPPS | 1,200-1,300 |
HIPS | 1,210-1,320 |
EPS | 1,260-1,370 |
Polystyrene grades
Last week in Central Europe EPS prices were in a range of 1,260-1,370 €/t. Demand came almost to a halt. Due to the end of the year. The insulation material season will restart as late as March, April. In this way only large companies continuously producing for the warehouse buy in advance.
The demand for GPPS and HIPS dropped as well. Grades produced in the EU are not available at all. Import from outside of Europe is expensive. The typical GPPS price range was 1,200-1,300 €. HIPS prices were in a range of 1,210-1,320 €.
The first price report of 2019 will be published on January 7.
Typ | Cena |
---|---|
HDPE blow molding | 1153 € / t |
HDPE film | 1153 € / t |
HDPE injection molding | 1152 € / t |
HDPE pipe (100) | 1345 € / t |
LDPE film | 1073 € / t |
LDPE general purpose | 1057 € / t |
PP co-polymer injection molding | 1273 € / t |
PP homo-polymer fiber | 1205 € / t |
PP homo-polymer injection molding | 1210 € / t |
PPR | 1335 € / t |
GPPS | 1226 € / t |
HIPS | 1245 € / t |
EPS | 1315 € / t |
myCEPPI - nový prístup v poradenstve a v spravodajstve v oblasti plastov. Poskytneme Vám detailný, aktuálny a na mieru vytvorený obraz o trhu s plastami v strednej a východnej Európe.
Vychádzame z našich osobných a pevných vzťahoch s významnými hráčmi v plastikárskom priemysle v strednej a východnej Európe. Každý mesiac uskutočňujeme stovky osobných a telefonických hovorov so spracovateľmi plastov, distribútormi a výrobcami surovín, zúčastňujeme sa odborných veľtrhov a konferencií.
Informácie, ktoré zhromažďujeme v rámci tohto procesu, tvoria základ našich týždenných cenových reportov komoditných plastov. Obsahujúce taktiež analýzu trhu. Tieto reporty taktiež slúžia ako východiskový bod pre naše ďalšie konzultačné služby ktoré poskytujeme spoločnostiam, ktoré potrebujú pomoc pri vstupe na trh, prípadne pri rozširovaní svojho biznisu, zorientovaní sa v situácií na trhu, atď. Naši odborníci majú desiatky rokov skúseností s plastami.
Radi Vám poskytneme naše služby.
História cien
- 2024:
- 2023:
- 2022:
- 2021:
- 2020:
- 2019:
- 2018:
- 2017:
Najnovšie inzeráty
-
03.05.2024 | ID: 202419068
Top inzerát Predám: Originálne granuláty LDPE, HDPE, PVC, PE, PP, PET
26.07.2022 | ID: 20229168
Top inzerátPredám: HDPE ex IBC tanks - regrind
28.05.2024 | ID: 202419256
Kúpim: Poptáváme výrobu gumových, nebo plastových ozubených kol.
27.05.2024 | ID: 202419255
Predám: HDPE fólia v rolkách 30 t
27.05.2024 | ID: 202419254
Predám: PA 6.6 Ultramid A3U42G6 drť
27.05.2024 | ID: 202419253
Predám: Farebné masterbatche na LLDPE nosiči
27.05.2024 | ID: 202419252
Predám: Absorbér vlhkosti (Desiccant) 200 t každý mesiac
27.05.2024 | ID: 202419251
Predám: Plnivo - filler masterbatch 100 t každý mesiac
27.05.2024 | ID: 202419250
Kúpim: Poptáváme výrobu gumových, nebo plastových ozubených kol.
27.05.2024 | ID: 202419255
Kúpim: Balíková LDPE fólia ,500 t/mesiac
27.05.2024 | ID: 202419247
Kúpim: Špinavý zvyškový granulát z podláh
27.05.2024 | ID: 202419245
-
27.05.2024 | ID: 202419228
Kúpim: Odpad z výroby plastov, drvina, chybné výlisky, vtoky
21.05.2024 | ID: 202419222
-
21.05.2024 | ID: 202419220
-
21.05.2024 | ID: 202419217
-
21.05.2024 | ID: 202419216
-
21.05.2024 | ID: 202419215
-
03.05.2024 | ID: 202419068
Top inzerát Predám: Originálne granuláty LDPE, HDPE, PVC, PE, PP, PET
26.07.2022 | ID: 20229168
Top inzerátPredám: HDPE ex IBC tanks - regrind
28.05.2024 | ID: 202419256
Predám: HDPE fólia v rolkách 30 t
27.05.2024 | ID: 202419254
Predám: PA 6.6 Ultramid A3U42G6 drť
27.05.2024 | ID: 202419253
Predám: Farebné masterbatche na LLDPE nosiči
27.05.2024 | ID: 202419252
Predám: Absorbér vlhkosti (Desiccant) 200 t každý mesiac
27.05.2024 | ID: 202419251
Predám: Plnivo - filler masterbatch 100 t každý mesiac
27.05.2024 | ID: 202419250
Predám: PE, PP, POM, PC, PVC, PC/ABS drť
27.05.2024 | ID: 202419249
Najbližšie výstavy
04.06.2024 - 07.06.2024 | Wels
04.06.2024 - 07.06.2024 | Lyon
04.06.2024 - 06.06.2024 | Štuttgart
04.06.2024 - 07.06.2024 | Buenos Aires
05.06.2024 - 08.06.2024 | Shanghai
05.06.2024 - 08.06.2024 | Hanoi
11.06.2024 - 14.06.2024 | Mexico City
11.06.2024 - 13.06.2024 | Norimberg
12.06.2024 - 14.06.2024 | Ho Chi Minh City
28.05.2024
28.05.2024
04.06.2024
04.06.2024
04.06.2024
Ponuky práce
Kontrolór kvality - ULSTRUP PLAST s.r.o.
17.05.2024
Lisár/lisárka - DIXI, výroba plastových obalov a.s.
17.05.2024
Špecialista rozvoja dodávateľov - HYDAC Electronic, s.r.o.
13.05.2024
Obchodný zástupca - špecialista predaja - Plastcom, spol. s r.o.
09.05.2024
CNC frézar/-ka senior v kusovej výrobe - Branson Ultrasonics, a.s.
09.05.2024
Nastavovač vstrekolisov - BOURBON AP Nitra, s.r.o.
09.05.2024
Vedúci oddelenia vstrekolisov a nástrojárne - Xinquan Slovakia Automotive Trim s.r.o.
29.04.2024
Nastavovač vstrekolisov - Tristone Flowtech Slovakia s.r.o.
11.04.2024
Plastikár, lepiaci personál - FORM s.r.o.
10.04.2024