Trhové ceny komoditných plastov týždenne
Uvádzame tu trhové ceny rôznych typov komoditných plastov PE-LD, PE-HD, PP a PS v strednej a východnej Európe s oneskorením 5 týždňov. Údaje spracoval náš partner myCEPPI.
Zaujímajú Vás aktuálne ceny komoditných plastov? Objednajte si túto službu Týždenné ceny komoditných plastov u nás v redakcií.
Ceny na týždeň 36/2019
The following factors influenced “commodity” polymer prices and price expectations last week:
- BRENT oil price 60.43 USD/barrel, increasing prices,
- EUR/USD: 1.099 weakening EURO, strengthening USD
- NAPHTHA: 446.86 USD/t, stagnating prices,
- Falling September monomer prices
- Ethylene (C2) contract price -40 EUR / t (970 EUR / t),
- Propylene (C3) contract price -50 EUR / t (860 EUR / t)
- On the day when the report was written styrene monomer contract (SM) price was not yet known
- Overall, strong demand for both polyolefin and polystyrene grades in August,
- Most plastic converters closed August with high feedstock inventories,
- Expected wide supply of HDPE from overseas,
September contract olefin monomer prices surprised the market on Friday afternoon. The telephone lines were hot and everyone was trying to evaluate the situation caused by the significant drop in olefin monomer prices. Contrary to previous expectations, there is little chance of a September price rollover for polyolefin grades, let alone a rise. The decline in prices is clear. This is bad news for both polymer producers and plastic converters. One of the reasons for strong demand in August was that converters thought it was time to buy, as polymer prices are now at their lowest this year. On the other hand, polymer producers exerted pressure and encouraged converters to buy with smaller discounts. Converters have replenished their feedstock warehouses by the end of last month, hoping polyolefin prices would rise in September. As a result, the otherwise mild August has become a strong month for polymer producers. Now, in early September, it seems certain that PE and PP prices will fall. The question is how much? And what kind of demand will come with falling prices?
Demand is expected to be weaker than usual in the first half of September, partly due to the already high raw feedstock inventory levels at converters. The other is uncertainty. Until it is clear where polymer prices are heading this fall, converters will not be able to develop a clear purchasing strategy either.
For the Central European market, now it is a major “help” that MOL Petrochemical is currently undergoing maintenance and at Slovnaft shutdown is expected in October. Thus, there is no selling pressure from the largest polymer producers. And since they already lowered prices for some product grades in August, it is likely that the ethylene monomer price drop will only be partially accepted on the market during the changer of their prices in September. However, the prospects for polyethylene prices are significantly worsened by the high volume of HDPE of North American-origin entering European ports, at prices by 40-50 EUR lower than the current market prices. The supply of MDPE, PPR and PPH grades with higher flow indexes remains tight.
SM prices are not yet known. However, the effects of ethylene price reductions and benzene price increases theoretically cancel each other out. Covestro's maintenance is expected to narrow SM's supply, coupled with a rise in SM's prices in Asia. This could theoretically push the September price of the SM up by even as much as € 20-40.
Polyolefin grades
Typical LDPE prices were in a range of 980-1,050 €/t last week, they did not change. In Poland, prices were in a range of 970 - 1,040 €/t. Few transactions have taken place and buyers have been waiting for September prices. Polymer producers did not force sales either, as in August they sold almost everything they wanted. Due to MOL maintenance, supply will be narrower in central and southern Europe. The strengthening dollar continues to weaken the selling position of import, especially from Russia. Thus, an average LDPE price drop by € 20 is expected in September.
Typical HDPE prices were in the range of 1,000-1,120 €/t in Central Europe, while Poland was slightly lower at 980-1,090 €/t. The pressure of overseas import materials is already having an impact here. This pressure is expected to persist in September and during the autumn, and is expected to infiltrate via traders into the rest of Central Europe by the end of the month. The continued appreciation of the dollar now acts against imports, making it more expensive. European HDPE manufacturers will probably try to curb the price decline and not pass on the full monomer price change. MOL Group maintenance will help a lot. Thus, similarly to LDPE, there will be moderate market price decreases. However, manufacturers who have kept their prices high so far will be forced to make major price reductions.
Typical HDPE BM list prices in Central Europe were in a range of 980-1,100 €/t. Demand was low last week. Prices for September are expected to be in a range of 980-1,080 €/t.
Typical HDPE IM prices ranged from 990 - 1,100 €/t in Central Europe. In September, a price range of 970-1,080 €/t is likely.
HDPE Film grade prices were in a range of 980-1,120 €/t in Central-Europe last week. Demand for some MDPE grades seems strong due to tight availability. Other producers have ample availability. In September, prices are expected to be in the range of 970-1,100 €/t.
Typical HDPE (100) prices were in a range of 1,240-1,300 €/t last week. They did not change compared to last week. The supply has narrowed. Customers do not expect price changes, however, due to monomer price changes, the price band will widen. In September, the price range is expected to be between 1,230-1,300 €/t.
The typical LLDPE C4 prices were in a range of 950-1,080 €/t last week, depending on the grade and application area. The price band has widened compared to the previous week. This is because cheaper shipments have appeared in Romania and Poland. In the meantime, due to the continued appreciation of the dollar, the prices of major suppliers rose by € 20-30. The dollar is expected to strengthen in September and rising prices are anticipated.
mLLDPE (C6) prices were in a range of 1,120-1,250 €/t last week. A price drop of € 20-30 is likely in September.
PPH prices have not changed compared to the previous week. Supply is still short. And it's not expected to be abundant in September either. This includes the maintenance of MOL Petrochemical, production problems at the Wesseling plant of Braskem and the expected decrease in imports from Russia. This also means that the total monomer price drop will not pass on to customers. The price reduction is likely to be between € 20 and € 40.
The typical price of PPH Raffia in Poland was 980-1,080 €/t, while in other countries of Central Europe they were in a range of 990-1,100 €/t last week. Supply and demand are balanced. September prices are expected to be in a range of 960-1,080 € t. Average prices within the price range may fall to a greater extent.
The price of non-special PPM IM products with medium melt index was in a range of 1,000-1,130 €/t in Poland. Typical prices in other Central European countries were in the range of 1,000-1,150 €/t. The prices of high flow index grades in Poland were in a range of 1,050-1,160 €/t and in other Central European countries in a range of 1,090-1,180 €/t. In the medium to high flow index segment, supply is tight. Average prices are expected to fall by 25-35 €. The expected price band for products with low and medium flow index is in a range of 980-1,100 €/t and for products with high flow index in a range of 1,040-1,120 €/t.
Typical prices for PPC were in a range of 1,130-1,240 EUR/t in Central Europe. Demand remains weak. Broad supply is expected in September. This is probably the only segment where the monomer price drop is likely to go through completely. Thanks to weakening automotive demand. September prices are expected in the price range of 1,120-1,200 €/t.
PPR demand is still good. Prices were in a range of 1,190-1,300 €/t last week. Prices are expected to drop by 20-30 €/t in September.
The typical prices of the last week are presented in the table below (full truck load 20-22.5 t):
Grade name | Typical polymer price ranges in the last week of Aug 2019, Central Europe (€/ton) | Expected polymer price ranges in the first week of Sept 2019, Central Europe (€/ton) |
HDPE BM | 1000-1100 | 980-1070 |
HDPE Film | 1000-1120 | 980-1100 |
HDPE IM | 1020-1100 | 990-1100 |
HDPE Pipe (100) | 1240-1300 | 1220-1280 |
LDPE Film | 980-1050 | 950-1020 |
LDPE GP | 990-1050 | 960-1030 |
LLDPE C4 | 980-1060 | 990-1080 |
mLLDPE C6 | 1120-1250 | 1110-1230 |
PPC | 1130-1270 | 1120-1230 |
PPH IM | 1000-1150 | 980-1120 |
PPH IM HMFR | 1060-1180 | 1040-1150 |
PPH Raffia | 980-1100 | 950-1060 |
PPR | 1190-1300 | 1170-1260 |
GPPS | 1120-1200 | - |
HIPS | 1145-1300 | - |
EPS | 1140-1230 | - |
ABS | 1430-1590 | - |
Polystyrene grades
EPS prices were in a range of 1,140-1,230 €/t last week. By the end of August, European EPS producers had emptied their stores. In principle, the months with the highest demand are coming now. Converters and producers are preparing for price increases. This is probably the reason why traders are holding back import stocks.
Typical GPPS prices were in a range of 1,120-1,200 €/t, while HIPS prices were in a range of 1,145-1,300 €/t last week. Demand is still good. The “wind” of price increases in the air.
ABS prices were in a price range of 1,420-1,590 € last week. Demand is low. Price changes depend on the price of the SM, and will follow it.Typ | Cena |
---|---|
HDPE blow molding | 1073 € / t |
HDPE film | 1074 € / t |
HDPE injection molding | 1069 € / t |
HDPE pipe (100) | 1268 € / t |
LDPE film | 1029 € / t |
LDPE general purpose | 1027 € / t |
PP co-polymer injection molding | 1195 € / t |
PP homo-polymer fiber | 1065 € / t |
PP homo-polymer injection molding | 1085 € / t |
PPR | 1254 € / t |
GPPS | 1154 € / t |
HIPS | 1206 € / t |
EPS | 1193 € / t |
myCEPPI - nový prístup v poradenstve a v spravodajstve v oblasti plastov. Poskytneme Vám detailný, aktuálny a na mieru vytvorený obraz o trhu s plastami v strednej a východnej Európe.
Vychádzame z našich osobných a pevných vzťahoch s významnými hráčmi v plastikárskom priemysle v strednej a východnej Európe. Každý mesiac uskutočňujeme stovky osobných a telefonických hovorov so spracovateľmi plastov, distribútormi a výrobcami surovín, zúčastňujeme sa odborných veľtrhov a konferencií.
Informácie, ktoré zhromažďujeme v rámci tohto procesu, tvoria základ našich týždenných cenových reportov komoditných plastov. Obsahujúce taktiež analýzu trhu. Tieto reporty taktiež slúžia ako východiskový bod pre naše ďalšie konzultačné služby ktoré poskytujeme spoločnostiam, ktoré potrebujú pomoc pri vstupe na trh, prípadne pri rozširovaní svojho biznisu, zorientovaní sa v situácií na trhu, atď. Naši odborníci majú desiatky rokov skúseností s plastami.
Radi Vám poskytneme naše služby.
História cien
- 2024:
- 2023:
- 2022:
- 2021:
- 2020:
- 2019:
- 2018:
- 2017:
Najnovšie inzeráty
-
03.05.2024 | ID: 202419068
Top inzerát Predám: Originálne granuláty LDPE, HDPE, PVC, PE, PP, PET
26.07.2022 | ID: 20229168
Top inzerát-
28.05.2024 | ID: 202419258
-
28.05.2024 | ID: 202419257
Predám: HDPE ex IBC tanks - regrind
28.05.2024 | ID: 202419256
Kúpim: Poptáváme výrobu gumových, nebo plastových ozubených kol.
27.05.2024 | ID: 202419255
Predám: HDPE fólia v rolkách 30 t
27.05.2024 | ID: 202419254
Predám: PA 6.6 Ultramid A3U42G6 drť
27.05.2024 | ID: 202419253
Predám: Farebné masterbatche na LLDPE nosiči
27.05.2024 | ID: 202419252
Kúpim: Poptáváme výrobu gumových, nebo plastových ozubených kol.
27.05.2024 | ID: 202419255
Kúpim: Balíková LDPE fólia ,500 t/mesiac
27.05.2024 | ID: 202419247
Kúpim: Špinavý zvyškový granulát z podláh
27.05.2024 | ID: 202419245
-
27.05.2024 | ID: 202419228
Kúpim: Odpad z výroby plastov, drvina, chybné výlisky, vtoky
21.05.2024 | ID: 202419222
-
21.05.2024 | ID: 202419220
-
21.05.2024 | ID: 202419217
-
21.05.2024 | ID: 202419216
-
21.05.2024 | ID: 202419215
-
03.05.2024 | ID: 202419068
Top inzerát Predám: Originálne granuláty LDPE, HDPE, PVC, PE, PP, PET
26.07.2022 | ID: 20229168
Top inzerát-
28.05.2024 | ID: 202419258
-
28.05.2024 | ID: 202419257
Predám: HDPE ex IBC tanks - regrind
28.05.2024 | ID: 202419256
Predám: HDPE fólia v rolkách 30 t
27.05.2024 | ID: 202419254
Predám: PA 6.6 Ultramid A3U42G6 drť
27.05.2024 | ID: 202419253
Predám: Farebné masterbatche na LLDPE nosiči
27.05.2024 | ID: 202419252
Predám: Absorbér vlhkosti (Desiccant) 200 t každý mesiac
27.05.2024 | ID: 202419251
Najbližšie výstavy
04.06.2024 - 07.06.2024 | Wels
04.06.2024 - 07.06.2024 | Lyon
04.06.2024 - 06.06.2024 | Štuttgart
04.06.2024 - 07.06.2024 | Buenos Aires
05.06.2024 - 08.06.2024 | Shanghai
05.06.2024 - 08.06.2024 | Hanoi
11.06.2024 - 14.06.2024 | Mexico City
11.06.2024 - 13.06.2024 | Norimberg
12.06.2024 - 14.06.2024 | Ho Chi Minh City
28.05.2024
28.05.2024
04.06.2024
04.06.2024
04.06.2024
Ponuky práce
Kontrolór kvality - ULSTRUP PLAST s.r.o.
17.05.2024
Lisár/lisárka - DIXI, výroba plastových obalov a.s.
17.05.2024
Špecialista rozvoja dodávateľov - HYDAC Electronic, s.r.o.
13.05.2024
Obchodný zástupca - špecialista predaja - Plastcom, spol. s r.o.
09.05.2024
CNC frézar/-ka senior v kusovej výrobe - Branson Ultrasonics, a.s.
09.05.2024
Nastavovač vstrekolisov - BOURBON AP Nitra, s.r.o.
09.05.2024
Vedúci oddelenia vstrekolisov a nástrojárne - Xinquan Slovakia Automotive Trim s.r.o.
29.04.2024
Nastavovač vstrekolisov - Tristone Flowtech Slovakia s.r.o.
11.04.2024
Plastikár, lepiaci personál - FORM s.r.o.
10.04.2024