Trhové ceny komoditných plastov týždenne
Uvádzame tu trhové ceny rôznych typov komoditných plastov PE-LD, PE-HD, PP a PS v strednej a východnej Európe s oneskorením 5 týždňov. Údaje spracoval náš partner myCEPPI.
Zaujímajú Vás aktuálne ceny komoditných plastov? Objednajte si túto službu Týždenné ceny komoditných plastov u nás v redakcií.
Ceny na týždeň 34/2019
The following factors influenced “commodity” polymer prices and price expectations last week:
- BRENT oil price 58.23 USD/barrel, increasing prices,
- EUR/USD: 1.1099, EURO getting weaker
- NAPHTHA: 442,6916 USD/t, low prices
- Relatively good sales in August,
- Polyolefin roll-over,
- Limited PS price increase, EPS lower price decrease
Last week was dedicated to vacation. Whoever could, was on leave. Few transactions have occurred. Nonetheless, mainly producers reported relatively good sales in August. However, most of these occurred before the 10th. One of the major regional polyolefin producers reported that they had sold everything they had planned. Most are expecting a September price increase and a sharp pickup in demand on August 19th. The recovery is sure, as most are now returning from vacation, and most of the plastic converter stoppages are about to end. The start of the season is also linked to the outage of one of Central Europe's largest polymer producers. The MOL Group is ready to shut down and will be able to meet needs from stock. However, the tight supply of MDPE is likely to persist throughout the fall season. The big question in the fall season is how strong will the import pressure be? Strengthening dollar worsens opportunities for imports, mainly North American goods in Europe, yet the inflow of Russian polymers will be strong in the fall season. The big question is, will polymer prices go up in September? Like every month, the monomer price change will be decisive. NAPHTHA prices are now around an average of 450 USD/t compared to the 500 USD level in July. This could also mean falling monomer prices. However, caution is important in this matter as the weak summer demand is true for NAPHTHA as well, and we will see more after the 19th.
The PS market also went on vacation. Demand was extremely weak throughout the week, weaker than for polyolefin grades.
Polyolefin grades
Typical LDPE prices were in a range of 980-1,050 €/t last week. They did not change. The supply is good, but the demand is weak. Demand is expected to grow during the week ahead.
The HDPE price band has widened, with the lower end of the price range reaching 1,000. This is due to weak demand. Typical prices were in a range of 1,000-1,140 €/t.
Typical HDPE BM list prices in Central Europe were in a range of 1,000-1,100 €/t. Demand was low. Weak demand also brought down prices, especially in Poland.
Typical HDPE IM prices ranged from 1,020 - 1,100 €/t in Central Europe. They did not change compared to last week, demand is weak.
HDPE Film grade prices were in a range of 1,000-1,120 €/t in Central-Europe last week. Demand is low. The range of MDPE grades is ever narrowing. Normal supply is only expected after MOL maintenance is completed.
Typical HDPE (100) prices were in a range of 1,235-1,300 €/t last week. They did not change compared to last week. Demand has been good so far in August, weak last week. However, converters are preparing for a good fall season.
The typical LLDPE C4 prices were in a range of 980-1,040 €/t last week, depending on the grade and application area. It didn't change over the previous week. Demand is low.
mLLDPE (C6) prices were in a range of 1,120-1,250 €/t last week. Supply is good, demand is low. Prices have not changed compared to the previous week.
PPH prices have not changed. Most transactions occurred in the first 10 days of August. Last week even the non-production at HIPOL caused no supply disruptions.
The typical price of PPH Raffia in Poland was 980-1,080 €/t, while in other countries of Central Europe they were in a range of 990-1,100 €/t last week, did not change. Demand was basically weak. We are expecting a pick-up in the week ahead, but that does not mean price increases.
The price of non-special PPM IM products with medium melt index was in a range of 1,000-1,130 €/t in Poland. Some smaller lots were sold at prices below 1,000 EUR/t. The prices in other Central European countries were in the range of 1,000-1,150 € / t. The prices of high flow index grades in Poland were in a range of 1,060-1,160 €/t and in other Central European countries in a range of 1,090-1,180 €/t. Central European prices also caught up with Polish prices, they decreased.
Typical prices for PPC were in a range of 1,140-1,240 EUR/t in Central Europe. Demand is low.
The PPR price was in a range of 1,190-1,300 € / t last week, demand was surprisingly good, supply was limited. This is how we got news of sales over € 1,300. Strong demand and tight supply are expected to persist.
The typical prices of the last week are presented in the table below (full truck load 20-22.5 t):
Grade name | Typical polymer price ranges in the third week of Aug 2019, Central Europe (€/ton) |
HDPE BM | 1000-1100 |
HDPE Film | 1000-1120 |
HDPE IM | 1020-1100 |
HDPE Pipe (100) | 1235-1300 |
LDPE Film | 980-1050 |
LDPE GP | 990-1050 |
LLDPE C4 | 980-1040 |
mLLDPE C6 | 1120-1250 |
PPC | 1140-1270 |
PPH IM | 1000-1150 |
PPH IM HMFR | 1060-1180 |
PPH Raffia | 980-1100 |
PPR | 1190-1300 |
GPPS | 1120-1200 |
HIPS | 1145-1300 |
EPS | 1140-1230 |
ABS | 1400-1590 |
Polystyrene grades
EPS prices were in a range of 1,140-1,230 €/t last week. They have fallen compared to early August and are at July price levels. The problem continues to be the lack of manpower in the construction industry. In principle, there is a season, but demand is weak. In addition to products from Iran, cheap Russian material is also available on the market.
Typical GPPS prices were in a range of 1,120-1,200 €/t, while HIPS prices were in a range of 1,145-1,300 €/t last week. The strong dollar has pushed back imports from the Middle East and Iran.
ABS prices were in a price range of 1,420-1,590 € last week. Demand is weak, but very cheap items are sold out. We expect recovery next week. The season starts.Typ | Cena |
---|---|
HDPE blow molding | 1073 € / t |
HDPE film | 1074 € / t |
HDPE injection molding | 1069 € / t |
HDPE pipe (100) | 1268 € / t |
LDPE film | 1029 € / t |
LDPE general purpose | 1031 € / t |
PP co-polymer injection molding | 1199 € / t |
PP homo-polymer fiber | 1055 € / t |
PP homo-polymer injection molding | 1085 € / t |
PPR | 1254 € / t |
GPPS | 1154 € / t |
HIPS | 1206 € / t |
EPS | 1193 € / t |
myCEPPI - nový prístup v poradenstve a v spravodajstve v oblasti plastov. Poskytneme Vám detailný, aktuálny a na mieru vytvorený obraz o trhu s plastami v strednej a východnej Európe.
Vychádzame z našich osobných a pevných vzťahoch s významnými hráčmi v plastikárskom priemysle v strednej a východnej Európe. Každý mesiac uskutočňujeme stovky osobných a telefonických hovorov so spracovateľmi plastov, distribútormi a výrobcami surovín, zúčastňujeme sa odborných veľtrhov a konferencií.
Informácie, ktoré zhromažďujeme v rámci tohto procesu, tvoria základ našich týždenných cenových reportov komoditných plastov. Obsahujúce taktiež analýzu trhu. Tieto reporty taktiež slúžia ako východiskový bod pre naše ďalšie konzultačné služby ktoré poskytujeme spoločnostiam, ktoré potrebujú pomoc pri vstupe na trh, prípadne pri rozširovaní svojho biznisu, zorientovaní sa v situácií na trhu, atď. Naši odborníci majú desiatky rokov skúseností s plastami.
Radi Vám poskytneme naše služby.
História cien
- 2024:
- 2023:
- 2022:
- 2021:
- 2020:
- 2019:
- 2018:
- 2017:
Najnovšie inzeráty
-
03.05.2024 | ID: 202419068
Top inzerát Predám: Originálne granuláty LDPE, HDPE, PVC, PE, PP, PET
26.07.2022 | ID: 20229168
Top inzerát-
28.05.2024 | ID: 202419258
-
28.05.2024 | ID: 202419257
Predám: HDPE ex IBC tanks - regrind
28.05.2024 | ID: 202419256
Kúpim: Poptáváme výrobu gumových, nebo plastových ozubených kol.
27.05.2024 | ID: 202419255
Predám: HDPE fólia v rolkách 30 t
27.05.2024 | ID: 202419254
Predám: PA 6.6 Ultramid A3U42G6 drť
27.05.2024 | ID: 202419253
Predám: Farebné masterbatche na LLDPE nosiči
27.05.2024 | ID: 202419252
Kúpim: Poptáváme výrobu gumových, nebo plastových ozubených kol.
27.05.2024 | ID: 202419255
Kúpim: Balíková LDPE fólia ,500 t/mesiac
27.05.2024 | ID: 202419247
Kúpim: Špinavý zvyškový granulát z podláh
27.05.2024 | ID: 202419245
-
27.05.2024 | ID: 202419228
Kúpim: Odpad z výroby plastov, drvina, chybné výlisky, vtoky
21.05.2024 | ID: 202419222
-
21.05.2024 | ID: 202419220
-
21.05.2024 | ID: 202419217
-
21.05.2024 | ID: 202419216
-
21.05.2024 | ID: 202419215
-
03.05.2024 | ID: 202419068
Top inzerát Predám: Originálne granuláty LDPE, HDPE, PVC, PE, PP, PET
26.07.2022 | ID: 20229168
Top inzerát-
28.05.2024 | ID: 202419258
-
28.05.2024 | ID: 202419257
Predám: HDPE ex IBC tanks - regrind
28.05.2024 | ID: 202419256
Predám: HDPE fólia v rolkách 30 t
27.05.2024 | ID: 202419254
Predám: PA 6.6 Ultramid A3U42G6 drť
27.05.2024 | ID: 202419253
Predám: Farebné masterbatche na LLDPE nosiči
27.05.2024 | ID: 202419252
Predám: Absorbér vlhkosti (Desiccant) 200 t každý mesiac
27.05.2024 | ID: 202419251
Najbližšie výstavy
04.06.2024 - 07.06.2024 | Wels
04.06.2024 - 07.06.2024 | Lyon
04.06.2024 - 06.06.2024 | Štuttgart
04.06.2024 - 07.06.2024 | Buenos Aires
05.06.2024 - 08.06.2024 | Shanghai
05.06.2024 - 08.06.2024 | Hanoi
11.06.2024 - 14.06.2024 | Mexico City
11.06.2024 - 13.06.2024 | Norimberg
12.06.2024 - 14.06.2024 | Ho Chi Minh City
28.05.2024
28.05.2024
04.06.2024
04.06.2024
04.06.2024
Ponuky práce
Kontrolór kvality - ULSTRUP PLAST s.r.o.
17.05.2024
Lisár/lisárka - DIXI, výroba plastových obalov a.s.
17.05.2024
Špecialista rozvoja dodávateľov - HYDAC Electronic, s.r.o.
13.05.2024
Obchodný zástupca - špecialista predaja - Plastcom, spol. s r.o.
09.05.2024
CNC frézar/-ka senior v kusovej výrobe - Branson Ultrasonics, a.s.
09.05.2024
Nastavovač vstrekolisov - BOURBON AP Nitra, s.r.o.
09.05.2024
Vedúci oddelenia vstrekolisov a nástrojárne - Xinquan Slovakia Automotive Trim s.r.o.
29.04.2024
Nastavovač vstrekolisov - Tristone Flowtech Slovakia s.r.o.
11.04.2024
Plastikár, lepiaci personál - FORM s.r.o.
10.04.2024