Trhové ceny komoditných plastov týždenne
Uvádzame tu trhové ceny rôznych typov komoditných plastov PE-LD, PE-HD, PP a PS v strednej a východnej Európe s oneskorením 5 týždňov. Údaje spracoval náš partner myCEPPI.
Zaujímajú Vás aktuálne ceny komoditných plastov? Objednajte si túto službu Týždenné ceny komoditných plastov u nás v redakcií.
Ceny na týždeň 18/2019
The following factors influenced “commodity” polymer prices and price expectations last week:
• BRENT oil price 74.35 USD/barrel, continuously increasing prices,
• EUR/USD: 1.1132, strong Euro
• NAPHTHA: 565.26 USD/t, increasing prices
• Slightly increasing SPOT olefin monomer and steeply increasing SPOT SM prices
- Ethylene (C2) spot price (FD NWE): +20 EUR/t compared to the status at the beginning of the month (1,095 EUR/t),
- Propylene (C3) spot price (CIF NWE): +40 EUR/t compared to early the month (945 ER/t), Styrene monomer (SM) spot price (FOB Rotterdam): + 65 USD/t compared to early the month (1,140 USD/t),
• Smaller pre-purchases in Poland
• Still short LDPE, LLDPE C4, PPH and now also PPC supply
Slow price increase continued in Central Europe, primarily for LDPE and LLDPE. There is clearly a shortfall behind the price increase. Cheaper items are already over, converters are forced to buy more expensive materials.
The good news is that HIPOL is producing again, so there are cheaper PP homopolymers on the market in Serbia and the surrounding countries. Its presence is not yet significant.
Maintenance at HIP Petrohemija polyethylene plants slowly ends (HDPE; 90 kt / year; LDPE: 60 kt / year) if the restart is problem-free, it is expected that polyethylene grades will be available in the second half of May as usual.
However, the development of polymer prices will primarily be determined by the contracted monomer prices in May published next week. For olefin monomers, market participants expect a clear increase in prices. Behind the rise in prices is the price increase of feedstocks, crude oil and NAPHTHA. But prices are driven up by the short supply of monomers, especially C3. In the case of ethylene (C2) +20-30 € / t, while in the case of propylene (C3) a price increase by 30-50 € / t is expected in May. The rise in spot prices also supports these expectations.
Plastic converters are aware of the price increase, but they could not buy in the absence of a commodity base. Although there are signs of market recovery, especially in Poland. In Poland, the week ahead will be very quiet, from Wednesday to Sunday, the whole country will be on holiday, and many will be on holiday over the whole week. But there will be a short week in the Orthodox Christian countries for Easter. Thus, the response to the first price announcements expected on Thursday-Friday is expected only around the sixth of May.
Spot SM prices rose slightly in Europe and Asia. And this is a strong price-raising factor in addition to the feedstock price increases. But SM prices are significantly pushed up by the maintenance of the Shell (Moerdijk 450 kt / year) SM plant scheduled as of Monday. The market would find it difficult to accept the three-digit SM price increase, the most likely price increase will be 70-90 €.
Polyolefin grades
Typical LDPE prices were in a range of 1,090-1,140 €/t last week. The bottom value of the price range has been increasing continuously. In Serbia and on the Balkan Peninsula, there is LDPE at a price of 1,040-1,060 € / t, originating from Iran. However, this price advantage is low, so it does not generate high demand. But it is able to determine the price level of May for restarting HIP-Petrohyemia. In May, the price increase will be 20-40 €, the expected typical price range will be 1,090-1,160 € / t.
HDPE supply did not grow over the past week. Thus, the relatively high prices remained. The typical HDPE prices in Poland were in a range of 1,140-1,220 €/t. In the other parts of Central-Europe the typical price range was 1,150-1,230 €/t.
HDPE BM prices in Central Europe were in the range of 1,140 to 1,210 € / t. An average price increase by 20-40 EUR can be expected in May. The supply is expected to expand in the second half of May.
HDPE IM prices were in a range of 1,130-1,200 €/t last week. Supply is still short. A price increase by 20-40 EUR can be expected in May.
HDPE Film grade prices were in a range of 1,150-1,230 €/t in Central-Europe. The demand, especially in Poland, was good. A price increase by 20-40 EUR can be expected in May.
Typical HDPE (100) prices were in a range of 1,300-1,390 €/t last week, they did not change. Demand was low last week, there were no major quantities pre-purchased. May prices will probably follow monomer prices. In this way we expect a price increase by 20-30 EUR in May.
LLDPE C4 supply is still short, the typical prices were in a range of 1,080-1,140 €/t last week. Average sales prices were around € 1,100 / t. In May, we expect constant price increases from week to week. As long as the supply is not expanded.
mLLDPE (C6) prices varied in a range of 1,170-1,300 €/t, Supply is broad, even in the lower price categories. A price increase by 20-30 EUR following monomer prices can be expected in May.
Typical PPH prices are in a range of 1,160-1,280 €/t. The start of HIPOL's production has stabilized the bottom of the price band. But this is mainly true in the south of Central Europe. In Poland and other countries in the region, PPH prices tend to be in the price range of 1,200 € / t and higher. We expect a price increase following monomer prices.
Typical PPH Raffia prices were in a range of 1,160-1,240 €/t last week. Most deals are made in a price range of 1,190-1,230 €/t.
The price of non-special PPM IM products with medium melt index was in a range of 1,170-1,260 €/t last week. Prices for high-flow index products were in the price range of 1,200-1,280 €. Average prices have been rising for weeks now.
Typical PPC prices were in a range of 1,290-1,350 €/t in Central-Europe last week. The bottom of the price range came increased further. Most customers expect price increases, so there would have been a demand last week. However, there are missing commodity bases. For the time being, from South Korea the usual low-cost PPC with medium-flow index has not arrived yet, which has secured low prices in recent months. European producers are preparing for a price increase by 30-40 € following monomer prices.
The PPR price range was 1,300-1,390 €/t, depending on the grade, producer and application area last week, prices did not change. Demand is good, supply is limited. We expect a price increase following monomer prices by 30-40 Euro.
The typical prices of the last week are presented in the table below (full truck load 20-22.5 t):
Grade name | Typical polymer price ranges in the fourth week of April 2019, Central Europe (€/ton) | Expected polymer price ranges in the first week of May 2019, Central Europe (€/ton) |
HDPE BM | 1140-1240 | 1160-1270 |
HDPE Film | 1130-1240 | 1150-1260 |
HDPE IM | 1130-1230 | 1150-1250 |
HDPE Pipe (100) | 1300-1390 | 1320-1420 |
LDPE Film | 1090-1140 | 1100-1160 |
LDPE GP | 1080-1140 | 1100-1160 |
LLDPE C4 | 1080-1140 | 1090-1150 |
mLLDPE C6 | 1170-1300 | 1170-1320 |
PPC | 1270-1350 | 1300-1380 |
PPH IM | 1170-1260 | 1180-1280 |
PPH IM HMFR | 1190-1280 | 1200-1300 |
PPH Raffia | 1160-1220 | 1170-1250 |
PPR | 1300-1380 | 1310-1410 |
GPPS | 1250-1430 | 1300-1500 |
HIPS | 1320-1510 | 1360-1580 |
EPS | 1350-1400 | 1400-1480 |
ABS | 1560-1720 | 1600-1800 |
Polystyrene grades
EPS prices were in a range of 1,300-1,400 €/t last week, they did not change. The aggregate demand in April was considered weaker than usual by the sellers. In the first quarter converters have accumulated significant inventories. In May, the market expects a price increase that is likely to be the same as the monomer price change (+ 70-90 € / t)
Typical GPPS prices were in a price range of 1,250-1,430 €/t, while HIPS prices were in a price range of 1,320-1,510 €/t last week. The expected price increase did not frighten the buyers, as besides the European grades there are also PS grades from outside of Europe and from Russia on the market. For European products, we expect a price change equal to the SM price increase.
The price range of ABS was 1,570-1,720 € last week. Due to Asian price changes, imports are steadily rising. In this way the bottom of the price range increases further. In the case of European products, we expect a price increase by 70-90 Euro, following the SM.
Typ | Cena |
---|---|
HDPE blow molding | 1171 € / t |
HDPE film | 1166 € / t |
HDPE injection molding | 1163 € / t |
HDPE pipe (100) | 1338 € / t |
LDPE film | 1096 € / t |
LDPE general purpose | 1096 € / t |
PP co-polymer injection molding | 1305 € / t |
PP homo-polymer fiber | 1203 € / t |
PP homo-polymer injection molding | 1208 € / t |
PPR | 1341 € / t |
GPPS | 1313 € / t |
HIPS | 1399 € / t |
EPS | 1384 € / t |
myCEPPI - nový prístup v poradenstve a v spravodajstve v oblasti plastov. Poskytneme Vám detailný, aktuálny a na mieru vytvorený obraz o trhu s plastami v strednej a východnej Európe.
Vychádzame z našich osobných a pevných vzťahoch s významnými hráčmi v plastikárskom priemysle v strednej a východnej Európe. Každý mesiac uskutočňujeme stovky osobných a telefonických hovorov so spracovateľmi plastov, distribútormi a výrobcami surovín, zúčastňujeme sa odborných veľtrhov a konferencií.
Informácie, ktoré zhromažďujeme v rámci tohto procesu, tvoria základ našich týždenných cenových reportov komoditných plastov. Obsahujúce taktiež analýzu trhu. Tieto reporty taktiež slúžia ako východiskový bod pre naše ďalšie konzultačné služby ktoré poskytujeme spoločnostiam, ktoré potrebujú pomoc pri vstupe na trh, prípadne pri rozširovaní svojho biznisu, zorientovaní sa v situácií na trhu, atď. Naši odborníci majú desiatky rokov skúseností s plastami.
Radi Vám poskytneme naše služby.
História cien
- 2024:
- 2023:
- 2022:
- 2021:
- 2020:
- 2019:
- 2018:
- 2017:
Najnovšie inzeráty
-
03.05.2024 | ID: 202419068
Top inzerát Predám: Originálne granuláty LDPE, HDPE, PVC, PE, PP, PET
26.07.2022 | ID: 20229168
Top inzerátKúpim: Poptáváme výrobu gumových, nebo plastových ozubených kol.
27.05.2024 | ID: 202419255
Predám: HDPE fólia v rolkách 30 t
27.05.2024 | ID: 202419254
Predám: PA 6.6 Ultramid A3U42G6 drť
27.05.2024 | ID: 202419253
Predám: Farebné masterbatche na LLDPE nosiči
27.05.2024 | ID: 202419252
Predám: Absorbér vlhkosti (Desiccant) 200 t každý mesiac
27.05.2024 | ID: 202419251
Predám: Plnivo - filler masterbatch 100 t každý mesiac
27.05.2024 | ID: 202419250
Predám: PE, PP, POM, PC, PVC, PC/ABS drť
27.05.2024 | ID: 202419249
Kúpim: Poptáváme výrobu gumových, nebo plastových ozubených kol.
27.05.2024 | ID: 202419255
Kúpim: Balíková LDPE fólia ,500 t/mesiac
27.05.2024 | ID: 202419247
Kúpim: Špinavý zvyškový granulát z podláh
27.05.2024 | ID: 202419245
-
27.05.2024 | ID: 202419228
Kúpim: Odpad z výroby plastov, drvina, chybné výlisky, vtoky
21.05.2024 | ID: 202419222
-
21.05.2024 | ID: 202419220
-
21.05.2024 | ID: 202419217
-
21.05.2024 | ID: 202419216
-
21.05.2024 | ID: 202419215
-
03.05.2024 | ID: 202419068
Top inzerát Predám: Originálne granuláty LDPE, HDPE, PVC, PE, PP, PET
26.07.2022 | ID: 20229168
Top inzerátPredám: HDPE fólia v rolkách 30 t
27.05.2024 | ID: 202419254
Predám: PA 6.6 Ultramid A3U42G6 drť
27.05.2024 | ID: 202419253
Predám: Farebné masterbatche na LLDPE nosiči
27.05.2024 | ID: 202419252
Predám: Absorbér vlhkosti (Desiccant) 200 t každý mesiac
27.05.2024 | ID: 202419251
Predám: Plnivo - filler masterbatch 100 t každý mesiac
27.05.2024 | ID: 202419250
Predám: PE, PP, POM, PC, PVC, PC/ABS drť
27.05.2024 | ID: 202419249
-
27.05.2024 | ID: 202419248
Najbližšie výstavy
28.05.2024 - 07.06.2024 | Düsseldorf
28.05.2024 - 30.05.2024 | Kyiv
04.06.2024 - 07.06.2024 | Wels
04.06.2024 - 07.06.2024 | Lyon
04.06.2024 - 06.06.2024 | Štuttgart
04.06.2024 - 07.06.2024 | Buenos Aires
05.06.2024 - 08.06.2024 | Shanghai
05.06.2024 - 08.06.2024 | Hanoi
11.06.2024 - 14.06.2024 | Mexico City
28.05.2024
28.05.2024
04.06.2024
04.06.2024
04.06.2024
Ponuky práce
Kontrolór kvality - ULSTRUP PLAST s.r.o.
17.05.2024
Lisár/lisárka - DIXI, výroba plastových obalov a.s.
17.05.2024
Špecialista rozvoja dodávateľov - HYDAC Electronic, s.r.o.
13.05.2024
Obchodný zástupca - špecialista predaja - Plastcom, spol. s r.o.
09.05.2024
CNC frézar/-ka senior v kusovej výrobe - Branson Ultrasonics, a.s.
09.05.2024
Nastavovač vstrekolisov - BOURBON AP Nitra, s.r.o.
09.05.2024
Vedúci oddelenia vstrekolisov a nástrojárne - Xinquan Slovakia Automotive Trim s.r.o.
29.04.2024
Nastavovač vstrekolisov - Tristone Flowtech Slovakia s.r.o.
11.04.2024
Plastikár, lepiaci personál - FORM s.r.o.
10.04.2024