Webinar - Current News Articles
Articles on Webinar. Daily updated information and news from the plastics industry.
SOPK organizes the conference Cyber Security in Regions - Western Slovakia 2024
- 05.03.2024
- Latest News
- Webinar
Information and technological security is an increasingly important topic due to the increasingly dynamic digitalization and automation of processes in the management and operation of public organizations and municipalities, as well as in the production and operation of companies, and in terms of...
Mitsubishi Electric is organizing a webinar from a series of engineering seminars: How to choose servo drives?
- 26.02.2024
- Latest News
- Webinar
The company Mitsubishi Electric organizes 29.2.2024 free webinar from the series of engineering seminars entitled "How to choose servo...
SOPK - organizes a webinar on the Waste Act No. 79/2015 Coll.
- 16.02.2024
- Latest News
- Webinar
SOPK invites you to a webinar: WASTE ACT No. 79/2015 Coll. Waste registration and reporting in waste management for the year 2023, which will be held on 21 February 2024 from 09:00 to...
Future.Industry 2024 - Invitation to ALTAIR Conference
- 06.02.2024
- Latest News
- Webinar
Book your time for ALTAIR’s annual conference dedicated to digital transformation in engineering and R&D, where simulation technologies (CAE) meet artificial intelligence and high-performance computing...
Webinar invitation: How to increase the quality of a part and reduce its production costs
- 24.05.2023
- Latest News
- Webinar
Do you want to achieve reduced time to market and optimized production in terms of part quality and production costs? Would you like to save time, costs, stress and at the same time significantly reduce the number of mold corrections and sampling? If your answer is yes, then we would like you, in...
Webinar of JAN SVOBODA s.r.o. focused on hydraulic cylinders and their selection
- 24.03.2023
- Latest News
- Webinar
The FREE webinar will include, among other things: Why do VEGA hydraulic cylinders have integrated ABS brakes? Cooled or cooling cylinders? Why do the cylinders have a piston rod end with an external thread, if it does not belong in the molds? Which cylinders have integrated...
ARBURG invites you to a webinar focused on the circular economy and upcoming legislative changes in the EU
- 21.03.2023
- Latest News
- Circular economy
- Webinar
ARBURG is organizing a short webinar this Wednesday morning. We know that in the near future, obtaining a contract will be conditional on the demonstrable fulfillment of ecologically sustainable production. The ongoing changes in European legislation will inevitably affect the situation in our...
The BGS ISD22 virtual trade fair continues today. Discuss with experts of radiation crosslinking and take a look at the unique plant in Bruchsal
- 29.09.2022
- Latest News
- Radiation technologies
- Webinar
BGS ISD22 continues today. Don’t miss a unique program full of lectures in the field of plastics radiation...
Today you can enjoy interesting online lectures about radiation sterilization of plastics on BGS ISD22
- 28.09.2022
- Latest News
- Radiation technologies
- Webinar
BGS ISD22 starts today. Don’t miss a unique program full of lectures in the field of radiation...
The virtual event of BGS ISD22 starts tomorrow. Don't miss the chance to learn more about radiation sterilization and the potential of radiation crosslinking.
- 27.09.2022
- Latest News
- Radiation technologies
- Webinar
BGS ISD22 starts tomorrow. Don’t miss a unique program full of lectures in the field of plastics radiation crosslinking and plastics radiation...
How to increase the heat resistance of plastics | BGS ISD22
- 23.09.2022
- Latest News
- Radiation technologies
- Webinar
The good thing about thermoplastics is that they can be plastically deformed when heated. The bad thing about thermoplastics is that they can plastically deform when...
Plastics radiation crosslinking in critical infrastructure |BGS ISD22
- 21.09.2022
- Latest News
- Radiation technologies
- Webinar
Critical infrastructures and related products such as cables, wires, pipes, hoses and electrical safety components influence our lives every day. Functionality, safety and reliability are basic requirements...
Benefits of radiation crosslinking for automotive applications | BGS ISD22
- 19.09.2022
- Latest News
- Radiation technologies
- Webinar
Climate change on our planet is forcing developers to make innovative changes and processes in many different areas. The automotive industry is no different. The intensity and speed of these changes have been enormous over the last...
Webinar: Simulate, Analyze, and Optimize With Advanced Plastic Injection
- 02.06.2022
- Latest News
- Webinar
ALTAIR and SIMCON have entered into a partnership (Altair Partner Alliance) and are organizing a webinar on advanced simulation and optimization methods for plastic...
Online lecture by technology-support s.r.o.
- 27.05.2022
- Latest News
- Events
- Webinar
On June 1, 2022, a webinar of the technology-support company entitled "Why do tool manufacturers need a specialized CAD / CAM solution?" Will take place on the virtual stage from 9:30 am as part of the accompanying program of the exhibition Production of Molds. Jakub Štetina will give a...
Another SMARTPLAST seminar: Reducing the effects of residual stress - part design, mold construction, machine setup
- 01.12.2021
- Latest News
- Injection molds
- Webinar
Residual stresses are mechanical, residual stresses created by the action of internal forces in the injection molded part during the injection cycle. In this webinar we will show how to reduce the effects of residual stress in the form of deformation of the part after...
Invitation to the webinar of SMARTPLAST s.r.o. - Influence of residual stress on deformations and part quality
- 18.11.2021
- Latest News
- Injection molding
- Webinar
Residual stresses are mechanical residual stresses that arise in the injection molded part during production. They remain built into the spray even after being ejected from the mold cavity and throughout the life...
Attend a free webinar: Conflict between part design and mold, how to further optimize cooling
The cost of plastic and cooling time can be more than 70% of the cost of manufacturing a part. In the last webinar No. 8, we described how the cooling time affects the wall thickness of the part, the type of plastic and fillers, the mold material and the identification of places with difficult heat...
Invitation to the webinar on injection cooling - SMARTPLAST s.r.o.
- 30.09.2021
- Latest News
- Injection molding
- Webinar
The cost of plastic and cooling time can be more than 70% of the cost of manufacturing a part. The cooling time is the longest part of the injection cycle. It depends mainly on the design of the part, the set injection parameters and the cooling...
Participate in the webinar: Inhomogeneity of injection under pressure-depressions-lunks-air bubbles
- 08.06.2021
- Latest News
- Webinar
SMARTPLAST s.r.o. invites you to a webinar: Injection Inhomogeneities for Pressure-Depression-Lunkry-Air Bubbles, which will take place on June 10, 2021 at 13:00 online. The lecturer is Ing. Petr...
Attend the Plastic Injection webinar from IMCD Czech Republic s.r.o.
- 30.04.2021
- Latest News
- Injection molding
- Webinar
IMCD Czech Republic s.r.o. invites you to a webinar, which continues the long tradition of seminars organized by this company. It will take place on 27.5.2021 from 1...
Attend the webinar - Injection instabilities when filling the mold cavity
- 14.04.2021
- Latest News
- Injection molds
- Webinar
Smartplast s.r.o. He invites you to a webinar entitled Injection instabilities when filling the mold cavity: orientation, cold joints, closed air. The webinar will take place on April 20, 2021 at 1 p.m. The presenter is Ing. Petr...
Invitation to the webinar Form as a heat exchanger
- 09.04.2021
- Latest News
- Injection molds
- Webinar
On Wednesday, April 14, 2021, a webinar "Form as a heat exchanger" will take place, which will take you to Jan...
Is it possible to measure color and gloss at the same time? Don't miss the webinar where you get to know more
- 08.03.2021
- Latest News
- Quality control
- Webinar
The Japanese company Konica Minolta Sensing is launching a new generation of high-end desktop spectral photometers. We invite you to an interactive webinar, on March 18th 2021, where we will introduce these innovative devices to Czech and Slovak users for the first...
Discover ZEISS X-ray quality control of plastic parts
- 24.02.2021
- Latest News
- Events
- Webinar
Carl Zeiss invites you to a webinar to introduce you to the possibilities of ZEISS X-ray quality control technology for plastic parts. The webinar will take place on March 16,...
Zortrax Apoller - webinar from ADATEX, s.r.o.
- 02.09.2020
- Latest News
- Webinar
Webinar on how to achieve great results with Sinterit...
Webinar: Uneven filling of injection mold cavities and how to adjust the filling
- 21.08.2020
- Latest News
- Events
- Webinar
In the webinar from Smartplast s.r.o. you will see the causes of uneven cavity filling, examples of uneven cavity filling, the effect of temperature, shear rate and viscosity, removal of uneven cavity filling and analysis of uneven cavity...
Webinar: What influences the formation of lunks, analysis of the formation of lunks and their removal
- 26.06.2020
- Latest News
- Events
- Webinar
In the webinar from Smartplast s.r.o. you will see the causes of lunking, the influence of design, the influence of the inlet system and the influence of cooling on the formation of lunkers, industrial tomography and prediction of lunk formation using...
The webinar of SOFTIP, a.s.: Process settings of the company (PDM, PLM, TPV)
- 15.06.2020
- Latest News
- CAD/CAM
- Webinar
SOFTIP, a.s. invites you to a free workshop organized in cooperation with a business partner for the field of technical preparation of production in the Czech Republic, the company CAD...
JAN SVOBODA s.r.o. and PEWE invite you to a webinar: Indestructible Marking with Panasonic Laser Systems
- 12.06.2020
- Latest News
- Events
- Webinar
The webinar will take place on Wednesday, June 17, 2020 at 10 a.m. It will take about 30...
Latest Classifieds
-
05.03.2024 | ID: 202418726
Top Advert -
18.04.2024 | ID: 202418992
-
18.04.2024 | ID: 202418991
-
18.04.2024 | ID: 202418990
To purchase: PPSU regrind banner
17.04.2024 | ID: 202418988
For Sale: Packaging press PL 12
17.04.2024 | ID: 202418987
To purchase: POM C regrind colour, white, natur
17.04.2024 | ID: 202418986
To purchase: PPSU regrind banner
17.04.2024 | ID: 202418988
To purchase: POM C regrind colour, white, natur
17.04.2024 | ID: 202418986
To purchase: Package quality LDPE film. 500 t/month
15.04.2024 | ID: 202418966
To purchase: Dirty granulates from ground
15.04.2024 | ID: 202418964
To purchase: PC and PMMA waste, regrinds, lumps etc.
11.04.2024 | ID: 202418943
To purchase: PET transparent trays, only Central Europe due to shipping costs
10.04.2024 | ID: 202418939
To purchase: PA6.6 GF25, TECHNYL A218, original
09.04.2024 | ID: 202418928
-
05.03.2024 | ID: 202418726
Top Advert -
18.04.2024 | ID: 202418992
-
18.04.2024 | ID: 202418991
-
18.04.2024 | ID: 202418990
For Sale: Packaging press PL 12
17.04.2024 | ID: 202418987
-
16.04.2024 | ID: 202418984
-
15.04.2024 | ID: 202418980
Upcoming Events
22.04.2024 - 26.04.2024 | Hannover
22.04.2024 - 26.04.2024 | Sao Paulo
23.04.2024 - 25.04.2024 | Maastricht
23.04.2024 - 26.04.2024 | Shanghai
23.04.2024 - 26.04.2024 | Wels
23.04.2024 - 25.04.2024 | Varšava
06.05.2024 - 10.05.2024 | Orlando
Saudi Plastics and Petrochem 2024
06.05.2024 - 09.05.2024 | Rijád
06.05.2024 - 09.05.2024 | Stuttgart
15.04.2024
16.04.2024
16.04.2024
17.04.2024
17.04.2024
Training - Injection moulding technology I.
15.04.2024
Festival of personnel and talent development
16.04.2024
17.04.2024
Training - Injection moulding technology II.
17.04.2024
17.04.2024
Job offers
-
11.04.2024
Plastic worker, gluing staff - FORM s.r.o.
10.04.2024
Logistics, warehouse and shipping supervisor - KNP s.r.o.
09.04.2024
Warehouseman - AIS Automotive Interior Systems Slovakia s.r.o.
09.04.2024
Sales representative / sales specialist - Plastcom, spol. s r.o.
04.04.2024
Maintenance and operation of the production line - Plastcom, spol. s r.o.
04.04.2024
Quality control technician - ESOX-PLAST s.r.o.
04.04.2024
Master of professional training - ESOX-PLAST s.r.o.
04.04.2024
Store manager - Ecocycle s.r.o
25.03.2024