Injection molding machines - Current News Articles - page 7
Articles on Injection molding machines. Daily updated information and news from the plastics industry.
-
K 2016: a resounding success for ENGEL
Thanks to a wealth of innovation, a positive climate for investment and enthu-siastic attendees, the K 2016 fair was a resounding success for ENGEL AUSTRIA. inject 4.0 – ENGEL’s answer to the challenges of the fourth industrial revolution – played a key role in this achievement. Furthermore, topics...
-
World premiere at the K 2016: Hybrid Allrounder with a clamping force of 6,500 kN
- 22.11.2016
- Machinery & Equipment
- Injection molding machines
Arburg has pulled off an unprecedented and unique triple coup at the K 2016 with the world premiere of the hybrid Allrounder 1120 H – a new machine size in a new design with the new Gestica control...
-
JSW - Fully electric injection molding machines
- 27.10.2016
- Machinery & Equipment
- Injection molding machines
Modern trends generally in the machine is fully electric machine. This also applies to the injection molding machine. It is in this time when there is a fleet renewal mills and most economically successful choosing fully electric injection molding machines. Among those in great demand, particularly...
-
ARBURG offers complex solutions for the packaging applications
- 24.10.2016
- Machinery & Equipment
- Injection molding machines
Lossburg. The emphasis in the packaging industry is on fast, high-quality serial production. Thus, the main priorities are precision and short cycle times. Arburg presented high-performance machines from the Alldrive and Hidrive electric and hybrid series at the Technology Days 2016. The versatile...
-
WITTMANN Group with a new subsidiary in Slovakia
- 19.10.2016
- Machinery & Equipment
- Injection molding machines
Since September of this year, the WITTMANN Group has been operating with its own subsidiary in Slovakia. Managing Director and CEO of the new subsidiary is Juraj...
-
DESMA is setting the standards for a new industrial age
- 14.09.2016
- Machinery & Equipment
- Injection molding machines
At the K 2016, the Fridingen-based mechanical engineering company presents itself stronger than ever with around 75% of additional exhibition space compared to the years before: Besides two DESMA injection moulding machines of the S3 series with robot integration and the newly developed e-drive...
-
ENGEL to present latest technologies at K 2016
At K 2016 in Dusseldorf from October 19 to 26, ENGEL will once more underscore is global claim to technological leadership. The injection moulding machine manufacturer and system expert headquartered in Schwertberg, Austria, will showcase its challenging applications targeted for the automotive,...
-
Grand Opening of second factory of Haitian International Germany
The German subsidiary of the world's largest injection molding machine manufacturer, Haitian International, celebrated the completion of its new manufacturing hall at its site in Ebermannsdorf together with 680 guests from 15...
-
WITTMANN celebrates 40th anniversary!
Beginning with the production of flow regulators in 1976, Dr. Werner Wittmann laid the cornerstone for a success story like no other in the plastics processing industry – and one that continues to this day. On June 8 and 9, 2016, customers and business partners of the WITTMANN Group were invited to...
-
The Company MAPRO spol. s.r.o. has prepared its customers evening full of surprises
The company MAPRO spol. s.r.o., Haitian injection molding retailer, celebrates this year 25 years since its establishment. To its customers on this occasion prepared in Wednesday, April 20 2016 rich cultural program in a large congress hall at the Regional Centre in...
-
DESMA starts roadshow across Europe
- 22.04.2016
- Machinery & Equipment
- Injection molding machines
Everyone is talking about the terms industry 4.0, the internet of things, or the digital factory that simultaneously also meet with huge media response. But what is the whole thing about? To get an idea of it, the Fridingen machine manufacturer is starting a roadshow across...
Fully electric machines JSW: long life, high reliability and functionality
- 22.04.2016
- Latest News
- Injection molding machines
JSW Machine s.r.o. is the official distributor of electric injection moulding machines...
Open day in KraussMaffei factory in Sučany - Slovakia
- 19.04.2016
- Latest News
- Events
- Injection molding machines
As in previous years, this time KUBOUŠEK SK, s.r.o. organizes for people interested in new technologies related to the production in the field of plastics processing, Open Day at KraussMaffei manufacturing plant in...
-
Arburg Technology Days 2016: Golden age
- 11.04.2016
- Machinery & Equipment
- Events
- Automation
- Photo reportage
- Peripherals
- Injection molding machines
The electric "Golden Electric" machine series celebrated its debut at the Arburg Technology Days, held from 16 to 19 March 2016 in Losburg. Thanks to the use of standardised components, the new machines feature high-quality proven Arburg technology "Made in Germany" at an attractive...
-
40 years of WITTMANN: Interview with Ing. Michal Slaba from the company Wittmann Battenfeld CZ spol. s r.o.
Year 2015 was for the group Wittmann in the spirit of expansion production capacities and the application of new technologies. This year, the activity continues unabated and continues with round anniversary celebrations of the founding of the company. About the progresses in the overall development...
-
Win an injection molding machine Zhafir Zeres ZE 1500 with the company MAPRO!
MAPRO company this year celebrates several anniversaries. On this occasion provides a unique opportunity to participate in the competition for the new Injection machine. Just this year ordered Haitian injection molding machine or...
-
Trendsetter silicone: KraussMaffei is presenting an all-electric AX for silicone applications at Fakuma
- 14.01.2016
- Machinery & Equipment
- Injection molding machines
Silicone components are on the rise; they are of particular interest in the medical and automotive industries due to the excellent physical and chemical properties of the material. At Fakuma (Hall A7, Booth 7303/7304) KraussMaffei is demonstrating the manufacturing of a nasal ventilator made of...
-
Ing. Jaroslav Novák: My years with Arburg (Part 2)
This story is about Jaroslav Novak memories from the beginning of his activity in the plastics sector and later in Arburg company. It's a vivid narration of a man, deeply concerned with his profession, who sacrificed a lot, but also gained a...
-
Ing. Jaroslav Novák: My years with Arburg (Part 1)
This story is about Jaroslav Novak memories from the beginning of his activity in the plastics sector and later in Arburg company. It's a vivid narration of a man, deeply concerned with his profession, who sacrificed a lot, but also gained a...
-
The company WITTMANN at the fair Fakuma
The company WITTMANN brought into the fair Fakuma 2015 several innovations. The biggest was made by servo-hydraulic machine Wittmann Battenfeld SmartPower 350/2250, which concluded a number of SmartPower, whose first part has been already introduced last...
Electric performance variants - Greater selection of ALLDRIVE machines above 2,500 kN
- 20.11.2015
- Latest News
- Injection molding machines
Greater performance always means a higher investment. To offer you a cost-effective means of adaptation to your individual application, we have specifically classified our electric ALLROUNDER A injection moulding machines based on dynamics, speed and...
-
Fully electric injection molding machines JSW, part. 2
- 16.11.2015
- Machinery & Equipment
- Injection molding machines
Continued article dated...
-
Fully electric injection molding machines JSW, part. 1
- 09.11.2015
- Machinery & Equipment
- Injection molding machines
The company Japan Steel Works was founded before World War I in 1907 as a manufacturer of steel products. Restart the company then took place after World War II, when he again started to produce stampings and injection molding machines. Since 1907 the company has come a long way in the successful...
-
WITTMANN 4.0 – the WITTMANN group’s answer to Industrie 4.0
On the way to Industrie 4.0, WITTMANN 4.0 provides an important element for integration and will be demonstrated at the Fakuma from 13 to 17 October on the injection molding machines exhibited there in hall B1, booth...
-
Smart Factory - what will bring us?
- 02.10.2015
- Machinery & Equipment
- Smart factory
- Industry 4.0
- Injection molding machines
- Injection molding
Currently, more and more articles on the subject of the so-called. Industry 4.0 thus imaginary fourth industrial revolution. This topic is not new, the Federal Republic of Germany under discussion in various professional circles for nearly ten years. And now also he arrived to us in the Czech...
-
The technology of injection molding presses for Dr. BOY
- 23.09.2015
- Machinery & Equipment
- Injection molding machines
Company Dr. BOY offers more than 45 years of experience in the development and manufacture of injection molding machines with a workforce of more than 40,000 units delivered...
-
The new picker SPX 10 SpruePicker has it all: speed, accuracy
Small automatic injection molding machines KraussMaffei CX series were introduced with the new picker SPX His servo drive is fully integrated into the automation control system MC6 and has a short cycle time and low operating costs at a minimum grabbing...
-
ENGEL to present inject 4.0 at Fakuma 2015
- 13.08.2015
- Machinery & Equipment
- Injection molding machines
"More than a machine" – this is the motto chosen by ENGEL AUSTRIA for this year's presentation of system solution competency at Fakuma from October 13th to 17th in Friedrichshafen,...
ENGEL to present inject 4.0 at Fakuma 2015
"More than a machine" – this is the motto chosen by ENGEL AUSTRIA for this year's presentation of system solution competency at Fakuma from October 13th to 17th in Friedrichshafen,...
-
Industrial additive manufacturing: Freeformer for complex geometries and individualisation
- 15.07.2015
- Machinery & Equipment
- Injection molding machines
From 13 to 17 April 2015, as an exclusive partner of the Hanover Fair, Arburg will present a complete process chain comprising injection moulding and additive manufacturing using Industry 4.0 technologies at the special “Additive Manufacturing” exhibit. Taking the example of a rocker-type light...
Latest Classifieds
For Sale: Original granulates LDPE, HDPE, PE, PP, PET
26.07.2022 | ID: 20229168
Top AdvertFor Sale: LDPE regranulat (EPE foam)
28.03.2024 | ID: 202418847
For Sale: Protective sheets for welding boxes
27.03.2024 | ID: 202418846
For Sale: Regrind black PPPE injection
26.03.2024 | ID: 202418845
-
25.03.2024 | ID: 202418844
Cooperation: Recycling of plastic waste
25.03.2024 | ID: 202418843
For Sale: PA 66 GF 30 regrind natur+white
25.03.2024 | ID: 202418842
-
21.03.2024 | ID: 202418823
To purchase: LDPE film, 500 t/month
21.03.2024 | ID: 202418813
-
20.03.2024 | ID: 202418812
To purchase: PE 50 t films in rolls - new
20.03.2024 | ID: 202418810
To purchase: GPPS transparent regrind
06.03.2024 | ID: 202418731
To purchase: Bayblend T 80 XG BBS910
22.02.2024 | ID: 202418671
-
20.02.2024 | ID: 202418666
For Sale: Original granulates LDPE, HDPE, PE, PP, PET
26.07.2022 | ID: 20229168
Top AdvertFor Sale: LDPE regranulat (EPE foam)
28.03.2024 | ID: 202418847
For Sale: Protective sheets for welding boxes
27.03.2024 | ID: 202418846
For Sale: Regrind black PPPE injection
26.03.2024 | ID: 202418845
-
25.03.2024 | ID: 202418844
For Sale: PA 66 GF 30 regrind natur+white
25.03.2024 | ID: 202418842
-
25.03.2024 | ID: 202418841
Upcoming Events
01.04.2024 - 30.04.2024 | Paríž
03.04.2024 - 05.04.2024 | Tashkent
09.04.2024 - 12.04.2024 | Mníchov
09.04.2024 - 11.04.2024 | Gorinchem
11.04.2024 - 14.04.2024 | Bratislava
15.04.2024 - 19.04.2024 | Düsseldorf
16.04.2024 - 18.04.2024 | Abu Dhabi
16.04.2024 - 18.04.2024 | Bydgoszcz
17.04.2024 - 20.04.2024 | Istanbul
25.03.2024
26.03.2024
01.04.2024
03.04.2024
09.04.2024
Project management - effective project management
25.03.2024
10.04.2024
Training - Injection moulding technology I.
15.04.2024
Festival of personnel and talent development
16.04.2024
17.04.2024
Job offers
Store manager - Ecocycle s.r.o
25.03.2024
Brusič na kulato - KOVOROB, s.r.o.
22.03.2024
Head of tool shop - KOVOROB, s.r.o.
22.03.2024
Designer of plastic injection molds - KOVOROB, s.r.o.
22.03.2024
Warehouseman/warehouse (valid VZV license as a condition) - EXPLAST Slovensko, s.r.o.
14.03.2024
Adjuster - AIS Automotive Interior Systems Slovakia s.r.o.
13.03.2024
Toolmaker - AIS Automotive Interior Systems Slovakia s.r.o.
13.03.2024
Plastic processing worker - Hard Plastic Recycling s.r.o.
13.03.2024
Sales Representative - ULTRAPOLYMERS, s.r.o.
12.03.2024