Current News Articles - page 65
Daily updated information and news from the plastics industry.
-
Titan - Tatraplast presents compact HPL cladding board
- 04.12.2013
- Plastics and Rubber products
Compact HPL board (HPL = High Pressure Laminates = high pressure laminates) are high-quality large-format boards. For their manufacture is used layered paper impregnated with resin, which is compressed into homogeneous solid board by high temperature and high...
-
Hot runners Thermoplay (part 2.)
The basic task of hot runners is fed molten, thus living material as close as possible to shorten molding cycle and thereby, reduce material consumption and raise the quality of molding. In order to achieve this, it is necessary to have installed a sufficient thermal capacity that is sufficient to...
-
Polykemi AB has celebrated its 45 years anniversary
- 28.11.2013
- Suppliers of raw materials
- Business economics
In the beginning of September Swedish compounder Polykemi AB celebrated its first 45 years as a company. During an information packed day - CEO Mr Ola Hugoson ao revealed that Polykemi Group is indeed investing for the...
-
Proposal to reduce annual 100Bn plastic bag usage
- 27.11.2013
- Plastics packaging
The European Commission has proposed that Member States reduce their use of lightweight plastic carrier bags. Member States can choose the measures they find most appropriate, including charges, national reduction targets or a ban under certain...
-
Hot runners Thermoplay (part 1.)
The basic task of hot runners is fed molten, thus living material as close as possible to shorten molding cycle and thereby, reduce material consumption and raise the quality of molding. In order to achieve this, it is necessary to have installed a sufficient thermal capacity that is sufficient to...
-
The winner of the student competition Kia Innovation Award 2013 is Independent cleaning particulate filter project
- 25.11.2013
- Machinery & Equipment
Kia Motors Slovakia (Kia) organized for students in Zilina and Trencin already the fourth annual competition called Kia Innovation Award. The task was to develop a competing project themes: safety of wheeled vehicles, environment, marketing, sales and after sales service car. About prizes and...
-
Composite conveyors from RATAJ SK s.r.o.: Nothing´s easier!
- 19.11.2013
- Machinery & Equipment
Intelligent technical solutions usually have one thing in common. They work on the simple principle, and therefore have little trouble, efficient and have multiple uses. Are precisely those without axis spiral conveyors Reichel...
-
Ensinger s.r.o.. - the world of engineering plastics
- 18.11.2013
- Plastics Semi-finished products
PlasticPortal.eu brings you an exclusive interview with a representative of the company Ensinger in Czech...
-
BASF additives for recycling - better than original
- 14.11.2013
- Plastics recycling
Until recently all plastic products after their use ended in landfills. Today, everyone knows that the waste is a valuable source of energy and raw materials, and most plastic waste can be used as a source of energy or as a material for mechanical...
-
Progressively developed polymer composites in automotive
- 13.11.2013
- Plastics and Rubber products
At present, research into new technologies, investing large amounts of resources mainly for the purpose of optimizing production, reducing costs and modernizing production and products. One of the most dynamic industries that are most affected by these trends is the automotive industry, which is...
-
MOL Group began construction of a plant for the production of butadiene in TVK
- 12.11.2013
- Suppliers of raw materials
MOL in Tiszaújváros began construction of a plant for the production of butadiene. The Group will supply the market with new petrochemical products within two years. Butadiene production will improve the profitability of both TVK in Hungary, but also throughout the MOL...
-
Unipetrol increases its shareholding in Èeská Rafinérská
On November 7th 2013, UNIPETROL, a.s. signed a share purchase agreement with Shell Overseas Investments B.V., for Shell’s 16.335% shareholding in ÈESKÁ RAFINÉRSKÁ, a.s. with the acquisition price for the shares in the amount of 27.2 USD...
-
The automotive industry is strategic for Slovakia
- 07.11.2013
- Services
This sector bears attributes for several years as a core, essential, supporting. Facts that we were able to summarize just shows exceptional position automobile industry, which even supported the scientific study of experts, led by prof. Ing. Nicholas Luptáèik, PhD. from the University of Economics...
-
Strong third quarter 2013 in BASF
- 06.11.2013
- Suppliers of raw materials
BASF 3rd quarter 2013 sales increased by 1.5% to 17.7 billion euros, despite significantly negative effect of exchange rate fluctuations of currencies. This increase was primarily the result of increasing sales volumes, particularly in the segment of Petroleum & Natural Gas. Income from operations...
-
Innovative system for the exchange of injection molds made by Stäubli
Today's automotive industry production is very much determined by the growing diversity and smaller production runs. The importance of this fact is seen when looking at the production of plastic parts Faurecia. 40t injection mold here has changed several times per shift - this operation can be...
-
Easy to operate robotic system from KraussMaffei
- 01.11.2013
- Machinery & Equipment
Core competencies range from simple linear devices by type "pick & place" to complex, custom-made production unit of industrial robots, or combinations...
-
News for better results in the injection molding from SVOBODA Ltd.
- 31.10.2013
- Plastics Processing
Among the novelties SVOBODA Ltd. company presented at this year's International Engineering Fair in Brno the patented water distributors, including control valves with turbulent flow, pressure and temperature and system for preventing Diesel effect in the forms and...
-
IML: Direct gating onto touchscreen film with SoftGate®
- 30.10.2013
- Machinery & Equipment
At Euromold 2012 this presentation generated great interest: the ready-to-install operating panel fitted with touchscreen sensors, produced in a single shot at the stand sponsored by Roth-Werkzeugbau GmbH of Wiebelsdorf, Germany. INCOE valve pin speed control optimises production of a new...
-
Slovakia needs more local subcontractors
Interview with Jaroslav Holecek, president of the Association of Automotive Industry of the Slovak Republic (ZAP SR) on the current situation subcontracting automotive...
-
Final press conference of K 2013 and photogallery
High Expectations Exceeded at K 2013, Many Pioneering Innovations prompting a Remarkable Number, Exhibitors anticipate Strong Post-Fair...
-
Conclusions of the Conference of Local Government and separate collection 2013
- 23.10.2013
- Plastics recycling
More than 200 participants of the conference Autonomy and separate collection 2013 agreed that the introduction of the principle of extended producer responsibility (care manufacturer of packaging / product from the development stage to the end stage of life), which should include the forthcoming...
-
Modula: the innovative drying technology of Piovan wins at leading car maker and obtains patent
- 22.10.2013
- Machinery & Equipment
The main prerequisites at BMW, for the selection of plastic material handling systems, including conveying, drying and blending, are the evident characteristics of energy efficiency, ease of use, productivity level stability, ecological compatibility and...
-
KraussMaffei at K 2013 for the first time presenting its proven technology SpinForm the machine GX series
- 17.10.2013
- Machinery & Equipment
KraussMaffei now offers the GX-Series SpinForm multicomponent technology, including design with swivel base, which result in significantly expands the...
-
Invitations to the Messe Düsseldorf 2013
Accept the invitation to visit the exposition of some major...
-
MSV Brno 2013 - Preliminary Final Report and Photo Gallery
55th anniversary International Engineering Fair showed the quality of Czech industrial production, which maintains a highly competitive and significantly contributes to the results of our exports. The participation of leading European and world producers also testified that the Czech and Central...
-
FOR ARCH became the largest construction fair in the Czech Republic
This year's International Building Trade Fair FOR ARCH 2013, focused on the topic: "Reconstruction and revitalization", which attracted a record number of visitors. On 17 to 21 September 2013 passed through the gates of the exhibition PVA EXPO PRAGUE in Prague Letòanech 71,290 people, an increase...
-
Conformal cooling simulation and analysis Cadmould ® 3D-F
- 09.10.2013
- Plastics Moulds
Conformal cooling shortens injection cycle up to 50%. Simulation software Cadmould ® 3D-F offers Plasty Gabriel...
-
Packaging live at MSV 2013 - with new technology packed sweets
This year comes packing line Packaging Live with several innovations - is held in r npavilonu of the larger open area, wrapping presents new machine and a new robot and r nzaøazuje the production department so. manual operation. "Visitors can thus four times r ndennì see packaging and storage...
-
New brand injection molding machines - Borche
- 07.10.2013
- Machinery & Equipment
Czech Republic and Slovakia enters the new brand of injection molding machines - Borch. The new brand machines provides new opportunities for processors and injection molding. Sales of injection molding ensures a Polish company...
-
Stäubli at K-Show
Düsseldorf Trade Fair, 16th to 23rd October 2013: The Booth. 11 in Hall. 11 will be exposed the best solutions for plastics processing, including an exceptional range of products for automation of injection molding machines. When you're on the K 2013 do not forget to come see the latest innovations...
Latest Classifieds
-
05.03.2024 | ID: 202418726
Top Advert Cooperation: Nezaplatené faktúry firmou Industry Storm s.r.o.
19.04.2024 | ID: 202418993
-
18.04.2024 | ID: 202418992
-
18.04.2024 | ID: 202418991
-
18.04.2024 | ID: 202418990
To purchase: PPSU regrind banner
17.04.2024 | ID: 202418988
For Sale: Packaging press PL 12
17.04.2024 | ID: 202418987
To purchase: PPSU regrind banner
17.04.2024 | ID: 202418988
To purchase: POM C regrind colour, white, natur
17.04.2024 | ID: 202418986
To purchase: Package quality LDPE film. 500 t/month
15.04.2024 | ID: 202418966
To purchase: Dirty granulates from ground
15.04.2024 | ID: 202418964
To purchase: PC and PMMA waste, regrinds, lumps etc.
11.04.2024 | ID: 202418943
To purchase: PET transparent trays, only Central Europe due to shipping costs
10.04.2024 | ID: 202418939
To purchase: PA6.6 GF25, TECHNYL A218, original
09.04.2024 | ID: 202418928
-
05.03.2024 | ID: 202418726
Top Advert -
18.04.2024 | ID: 202418992
-
18.04.2024 | ID: 202418991
-
18.04.2024 | ID: 202418990
For Sale: Packaging press PL 12
17.04.2024 | ID: 202418987
-
16.04.2024 | ID: 202418984
-
15.04.2024 | ID: 202418980
Upcoming Events
22.04.2024 - 26.04.2024 | Hannover
22.04.2024 - 26.04.2024 | Sao Paulo
23.04.2024 - 25.04.2024 | Maastricht
23.04.2024 - 26.04.2024 | Shanghai
23.04.2024 - 26.04.2024 | Wels
23.04.2024 - 25.04.2024 | Varšava
06.05.2024 - 10.05.2024 | Orlando
Saudi Plastics and Petrochem 2024
06.05.2024 - 09.05.2024 | Rijád
06.05.2024 - 09.05.2024 | Stuttgart
15.04.2024
16.04.2024
16.04.2024
17.04.2024
17.04.2024
Training - Injection moulding technology I.
15.04.2024
Festival of personnel and talent development
16.04.2024
17.04.2024
Training - Injection moulding technology II.
17.04.2024
17.04.2024
Job offers
-
11.04.2024
Plastic worker, gluing staff - FORM s.r.o.
10.04.2024
Logistics, warehouse and shipping supervisor - KNP s.r.o.
09.04.2024
Warehouseman - AIS Automotive Interior Systems Slovakia s.r.o.
09.04.2024
Sales representative / sales specialist - Plastcom, spol. s r.o.
04.04.2024
Maintenance and operation of the production line - Plastcom, spol. s r.o.
04.04.2024
Quality control technician - ESOX-PLAST s.r.o.
04.04.2024
Master of professional training - ESOX-PLAST s.r.o.
04.04.2024
Store manager - Ecocycle s.r.o
25.03.2024