Current News Articles - page 62
Daily updated information and news from the plastics industry.
-
The new series of robots TX2 with more power from Stubli
- 10.06.2014
- Machinery & Equipment
When Stubli presented a new series of robots TX at the trade fair Automatica 2004, requirements for performance six-axis robots are completely changed. Now, exactly ten years later, history repeats itself in the performance range of Stubli TX2, the successor generation of robots that will raise...
-
BASF again leading in research and innovation
- 06.06.2014
- Suppliers of raw materials
BASF increased spending on research and development to 1.8 billion (2012: 1.7 billion) in 2013. In absolute terms, we lead the field in the chemical industry with our research and development expenditures, said Dr. Andreas Kreimeyer, member of the Board of Executive Directors of BASF SE and...
-
GF Machining Solutions presents electroerosion machining wire cutters AgieCharmilles
- 05.06.2014
- Machinery & Equipment
The combination of high performance and precision cutting - CUT200 MS / MS...
-
Injection molding, biodegradable plastics - bioplastics, part 1
- 04.06.2014
- Plastics Processing
The first plastics suitable for injection molding-made in the late 19th and early 20th century, such as celluloid - first "plastic" commercially exploitable was discovered in 1855, in 1910, Henry Ford in the U.S. experimented with wheat and soy and 1915 is in series produced the Ford Model T...
-
Opening Laboratory of security research at STU in Bratislava
- 03.06.2014
- Services
Faculty of Chemical and Food Technology is involved in interesting projects under the Structural Funds - Security Research Centre of Excellence. The bearer of the project is Academy Police Corps and Principal Investigator for our faculty is doc. Ing. tibrnyi L., MD .. The center is focused on...
-
Nordson EFDs PICO xMOD Exchangeable/Modular Dispensing Valve Improves Productivity and Reduces Cost
- 02.06.2014
- Machinery & Equipment
Nordson EFDʼs PICO xMOD valve system technology uses high-tech, robust, durable piezoelectric actuation technology for continuous operation at speeds of up to 500 cycles/second. The PICO xMOD can produce deposits as small as 0.5 nanoliters, at high production speeds, with exceptional deposit...
-
Synventive Introduces SynFlow Two-Speed Sequential Valve Gating Hot Runner Technology
- 29.05.2014
- Plastics Moulds
Synventive Molding Solutions announced today the availability of its SynFlow two-speed sequential valve gating hot runner technology. The unique, cutting edge technology provides molders with optimized plastic flow control, and solves common surface defect problems on large parts such as...
-
Photogallery from the 21th International Engineering Fair in Nitra
- 28.05.2014
- Services
This year the fair was attended by more than 400 exhibitors and co-exhibitors, representing a further 200 companies in many countries, mainly from Slovakia, Czech Republic, Austria, Germany, Switzerland, Italy, France, but also from overseas countries such as., Japan, Taiwan . Listed company...
-
Automotive Industry Association is celebrating 25 years since the establishment
- 27.05.2014
- Services
Automotive Industry Association (AutoSAP) for 25 years, represents and defends the interests of car manufacturers, their parts and others domestic auto...
-
Montrac is an intelligent monorail conveying system for manufacturing and logistical processes
- 26.05.2014
- Machinery & Equipment
Montratec is specialized in the manufacturing, developing and marketing of automated transport systems and solutions. Montratecs service includes the consulting and engineering of customized projects, ranging from single components of the catalogue, to complete system solutions with flexible...
-
Awards at the International Engineering Fair in Nitra 2014
- 22.05.2014
- Services
On Monday, 20th May 2014 at 16.00., was inaugurated 21th International Engineering Fair in Nitra, which includes exhibitions EUROWELDING, CAST-EX, CHEMPLAST, EMA, and TECHFRUM ELECTRON. The fair was opened by Minister of Economy Mr. Thomas Malatinsk, president of the Federation of Mechanical...
-
Positive conclusions of SIZP checks confirmed the importance of education of producers and importers of packaging
- 21.05.2014
- Plastics packaging
Slovak Environmental Inspectorate is a state supervisory authorities in waste management Slovak Republic. As part of its activities carried out, inter alia, enforcement of the obligation under the Act no. 119/2010 Coll packages in conjunction with other generally binding legal regulations of waste...
-
High technology for 3D scanning and optical measurement of MSV in Nitra
- 20.05.2014
- Machinery & Equipment
3D scanning is a rapidly developing field, whose influence increasingly extends into many areas of human activity. The leading Czech supplier of 3D technology company MCAE Systems, has the use and implementation of 3D scanners and related procedures many years of rich...
-
WITECH represents WIDOS 4400/4600/4900/4911/250 It Weld / Weld It 315
- 19.05.2014
- Machinery & Equipment
The most common device for welding pipes and fittings made of PE, PP and PVDF, for diameters from DA 50 and DA 355 mm, with hydraulic feed...
-
PlasticPortal.eu is with you almost 5 years
- 15.05.2014
- Services
Since the founding PlasticPortal.eu we strive to continuously improve our services to visitors of the portal should always be at hand the latest information from the plastics and rubber industry. We are proud of the fact that even after 5 years you can be close and to continue these...
-
MC6, the smartphone of machining control systems
Injection-molded parts made of plastic are becoming more complex, as are the systems used to produce them. After the molding process, industrial robots are increasingly replacing simple linear ones. But they are more difficult and time-consuming to program than their predecessors. With integrated...
-
Nordson EFDs 781S Spray Valve System Applies Oils, Grease, & Lubricants
Nordson EFD, a Nordson company (NASDAQ: NDSN), the worlds leading precision fluid dispensing systems manufacturer, is working with manufacturers around the world to help them improve their lubrication process and control fluid costs with its 781S Spray...
-
Unipetrol recorded significant improvement of sales volumes in all segments
- 12.05.2014
- Suppliers of raw materials
In Q1 Unipetrol Group posted revenues of CZK 28.809 bn, indicating an increase of 16% y/y compared with the first quarter of 2013. The increase was especially driven by the operation of higher refining capacity in Ceska rafinerska (67,555%) since February, upon successful completion of the...
-
Plastic Additives Market will Reach $57.8 Billion, Globally, by 2020 Allied Market Research
- 08.05.2014
- Suppliers of raw materials
Allied Market Research today published the most comprehensive and strategically analyzed report titled Plastic Additives Market (Functions, Types, Applications and Geography) Size, Share, Global Trends, Analysis, Opportunities, Growth, Intelligence and Forecast, 2012-2020. The global plastic...
-
3D technology from MCAE Systems has surprising innovations
MCAE Systems has existed since 1995 and has long been one of the leading suppliers of 3D digital technology (Rapid Prototyping, 3D modeling, 3D digitization and measurement, CAD / CAM) in Czech, Slovak and other foreign...
-
Polykemi Group Invests 7 M EUR in Ystad (Sweden) & Kunshan (China)
- 06.05.2014
- Suppliers of raw materials
- Business economics
Scandinavias biggest compounder Polykemi AB admits that during recent time - the magnitude of new technical investments has not been up to the historic standard, but now the management has decided that it is about time to return back to more normal...
-
High quality hole machining with five axes
- 05.05.2014
- Machinery & Equipment
The Swiss company GF Machinining Solutions responding to the increased demands of the market introduced a new range of powerful EDM CNC punching machines labeled 300 DRILL / DRILL...
-
Plastika, a.s. introduces new products
- 30.04.2014
- Plastics and Rubber products
Plastika, a.s., a traditional manufacturer of plastic products in Slovakia, completely restructured its organization in 2013. These extensive changes resulted, among other things, in a number of new products in their main pipe system and fitting lines as well as in the area of...
-
Modern temperature control is customer oriented and saves energy
- 29.04.2014
- Machinery & Equipment
Regloplas AG, the temperature control unit manufacturer in St. Gallen, Switzerland, in-creasingly follows the trend for more customer-orientation in developing and constructing its temperature control units. The needs of the modern customer are more complex than ever, at the same time requiring...
-
NATUR-PACK 21 th Conference on Packaging Waste and Sustainability Forum 2014 - Part 3
- 28.04.2014
- Services
In the third part of the conference Packaging Waste and Sustainability Forum 2014 will focus on the perspective and experience tzv.povinnch persons, companies that fall under the application of extended producer responsibility (EPR). Since EPR application varies across countries, multinational...
-
Photo Gallery FOR INDUSTRY and FOR LOGISTIC 2014
- 24.04.2014
- Services
Set of industrial fairs to confirmed the unique opportunity to present advanced production technology, technology and innovation trends in Prague. Company representatives were acquainted with instructions and practical examples that can help them cope with the difficult economic situation in the...
-
Kia plant in Slovakia celebrates 10th anniversary
- 23.04.2014
- Plastics and Rubber products
Kia Motors Slovakia commemorates 10th anniversary of its arrival in Slovakia. To sign an investment agreement between Kia Motors Corporation and the Government of the Slovak Republic was 18 March 2004, while construction works lasted nearly two...
-
Why to choose wastewater treatment plant from Aquatec VFL, Ltd.
- 21.04.2014
- Plastics and Rubber products
Company management Aquatec VFL, Ltd. know the choice of wastewater treatment plants for end users. Since wastewater treatment plant is a technological device, the customer who needs odkanalizova your house (or an other object), is dependent on information from many representatives of companies...
-
Open House 2014 with Wittmann Battenfeld CZ spol. Ltd.
Wittmann Battenfeld CZ Ltd. celebrated the 10th anniversary of its presence on the market in the Czech and Slovak Republic. On this occasion Wittmann held for its customers event called "Open House 2014" on 10 April. Interest was beyond expectations really great. The event was attended by 110...
-
Face-leavers in the Department of Production Engineering at TBU 2014
- 16.04.2014
- Services
Within 2 the sustainability of the project and no key activity. 02 this project was undertaken work placements for pupils of school-leavers Class 4 And, on 15 10 2013 14 1 25 2 and 11 3 2014 perfectly furnished and constantly evolving workplace UVI and Workplace Technology Park TBU assisted...
Branch Dictionary
