Weekly commodity price report
Here are the market prices of various types of commodity plastics PE-LD, PE-HD, PP and PS in Central and Eastern Europe with a delay of 5 weeks. The data was processed by our partner myCEPPI.
Are you interested in current prices for commodity plastics? You can order Weekly polymer price reports from our editors.
Prices for this week 30/2019
The following factors influenced “commodity” polymer prices and price expectations last week:
- BRENT oil price 64.35 USD/barrel, increasing prices again,
- EUR/USD: 1.1241, EURO getting weaker
- NAPHTHA: 500.22 USD/t, decreasing prices
- Stabilizing polymer prices,
- The market expects a monomer and polymer price roll over in August,
- Slightly increasing demand
Last week, polymer prices did not change significantly. Low prices have led to a slight increase in demand. So the prices were stable. The fact, that we are in the very middle of the holidays season curbs significant demand growth. So does the fact that market participants expect monomer price roll over in August. This also means roll-over on the polymer market. Many people feel they still have time to buy in August. The fact that there is no significant stock pressure on most polymer producers is counterproductive for further summer price cuts. The majority of Western European producers who could not sell through their traditional channels have sold their products to traders. Being afraid of the low summer demand. MOL, the largest Central European player, is preparing for maintenance in September-October. So now it builds significant stocks. Only a few producers are struggling with pressure exerted by high inventories. Mainly in the PPC / PPR area. However, relying on prices starting to rise in September at the latest, they will not significantly reduce their prices. An “extra” 20-30 € discount can be achieved with a larger order.
The situation is more difficult for polystyrene. For the time being, demand is weak despite low prices. Due to low prices, there is a smaller supply of non-European import materials. No significant change can be expected in August, as with the olefin monomers, even in the case of SM, we can expect a minor price change of “cosmetic” nature. Basically roll-over is likely.
Polyolefin grades
Typical LDPE prices were in a range of 970-1,050 €/t last week. They did not change compared to last week. All that has happened is that more and more people are trying to buy in a range of 970-1,010 € /t from cheaper materials. There was enough quantity in this price category last week due to the large sales of Western European polymer producers.
HDPE prices have also stabilized. Typical prices remained in a range of 1,030-1,120 €/t. Like LDPE, there are more and more goods near the bottom of the price-band. Due to the weak demand, even Central European manufacturers are willing to grant a smaller discount of 10-25 € if there is a larger order.
Typical HDPE BM list prices in Central Europe were in a range of 1,030-1,100 €/t. Demand is low.
Typical HDPE IM prices ranged from 1,020 - 1,100 €/t in Central Europe. Supply is good, demand is low in Central-Europe.
HDPE Film grade prices were in a range of 1,020-1,120 €/t in Central-Europe. Demand is low.
Typical HDPE (100) prices were in a range of 1,225-1,300 €/t last week. The demand is in line with the season. Demand improved slightly, it is even better than in May for some producers. Due to low prices demand increased. Especially after the further significant fall in prices has become more and more unlikely.
The typical LLDPE C4 prices were in a range of 980-1,040 €/t last week, depending on the grade and application area. Demand is good, first of all in the price category below 1,000 €.
mLLDPE (C6) prices were in a range of 1,120-1,250 €/t last week. The supply is wide-ranging from both European and non-European materials. Large Western European producers, Ineos, Repsol are increasingly looking to Central Europe as a target market and are trying to create a market place with low prices. This will force the market leader Exxon to lower the overall price level.
PPH prices remain the cheapest in Poland. They are in a range of 1,010-1,100 €/t. In other Central European countries, typical prices in a range of 1,060-1,150 €/t were measured. Polish prices rose slightly, stocks below 1,000 € were sold. Demand has increased due to low prices.
The typical price of PPH Raffia in Poland was 1,010-1,100 €/t, while in other countries of Central Europe they were in a range of 1,060-1,130 €/t last week. Demand increased. We do not expect price increases in August either, as the inflow of more and more goods is expected from Russia due to growing production and weak demand.
The price of non-special PPM IM products with medium melt index was in a range of 1,030-1,130 €/t in Poland. In other Central European countries the typical price was 1,070-1,150 €/t. The prices of high flow index products were in the price range of 1,060-1,180 €/t. The price range came to be slightly wider downwards. In other Central European countries the typical price was 1,100-1,230 €/t. Demand is good compared to the season.
Typical prices for PPC were in a range of 1,170-1,270 EUR/t in Central Europe. Demand is not very good. Buyers expect additional discounts. Larger quantities can only be sold with a 20-30 € discount. The cheapest prices (1,150-1,210 €/t) were typical in Poland. In the other parts of Central-Europe prices fell slightly (1,170-1,270 €/t). Summer stoppages affect PPC most. Many converters are already buying in advance for the second half of August.
PPR prices were in a range of 1,190-1,290 €/t last week. Demand and supply are good and balanced. However, in the field of pipe materials, some polymer producers / compounders have accumulated higher stocks in connection with the planned shutdown of MOL Petrochemical.
The typical prices of the last week are presented in the table below (full truck load 20-22.5 t):
Grade name | Typical polymer price ranges in the third week of July 2019, Central Europe (€/ton) |
HDPE BM | 1020-1100 |
HDPE Film | 1020-1120 |
HDPE IM | 1020-1090 |
HDPE Pipe (100) | 1225-1300 |
LDPE Film | 970-1070 |
LDPE GP | 990-1070 |
LLDPE C4 | 980-1050 |
mLLDPE C6 | 1120-1250 |
PPC | 1170-1270 |
PPH IM | 1030-1150 |
PPH IM HMFR | 1090-1230 |
PPH Raffia | 1000-1130 |
PPR | 1190-1290 |
GPPS | 1090-1200 |
HIPS | 1145-1250 |
EPS | 1150-1220 |
ABS | 1400-1550 |
Polystyrene grades
EPS prices were in a range of 1,150-1,220 €/t last week. Only the first quarter was good this year. The second quarter and there are fears that also the third will be pretty weak. While it would be worth buying now, most of the insulation materials producers are full of raw materials and finished products. But demand is still low.
Typical GPPS prices were in a range of 1,090-1,200 €/t, while HIPS prices were in a price range of 1,145-1,250 €/t. They did not change compared to last week. There is less material from outside of Europe or less competitive. Cheaper shipments from Iran and North Africa are expected to arrive in August.
ABS prices were in a price range of 1,400-1,550 € last week. Demand is weak due to automotive downtime. It is expected to remain low until mid-August. We expect significant demand growth after August 18th.Type | Price |
---|---|
HDPE blow molding | 1088 € / t |
HDPE film | 1102 € / t |
HDPE injection molding | 1083 € / t |
HDPE pipe (100) | 1268 € / t |
LDPE film | 1047 € / t |
LDPE general purpose | 1049 € / t |
PP co-polymer injection molding | 1236 € / t |
PP homo-polymer fiber | 1070 € / t |
PP homo-polymer injection molding | 1106 € / t |
PPR | 1263 € / t |
GPPS | 1154 € / t |
HIPS | 1206 € / t |
EPS | 1205 € / t |
myCEPPI – a new voice and new approach on the plastics industry consulting and business intelligence market. With our expert advice, you can get a detailed, up-to-date and tailor-made picture of the Central and Eastern European plastics market and its main trends, data, news and key players.
Our services rely on our personal, regular and in-depth relations with players of the CEE plastics industry.
Each month, we conduct hundreds of interviews and telephone calls with industry players – plastics converters, traders, resin manufacturers – and we are also present at the biggest regional plastics trade fairs and conferences.
The information we collect in the process forms the basis of our weekly price report and market analysis; it feeds into our plastics industry company database; and it serves as the starting point for our multi-level consulting services for companies that need help sizing up, entering or navigating a specific market.
Our experts possess decades of plastics industry experience, as well as fluency in several regional languages.
Our partners include
- key players of the CEE plastics industry – the resin
- master-batch and machinery manufacturers
- distributors, and plastics converters that shape market trends across the region.
We would be happy to welcome you as a partner; please do not hesitate to contact us!
(László Büdy, Managing director, head of consulting)
Price history
- 2024:
- 2023:
- 2022:
- 2021:
- 2020:
- 2019:
- 2018:
- 2017:
Latest Classifieds
For Sale: Original granulates LDPE, HDPE, PE, PP, PET
26.07.2022 | ID: 20229168
Top AdvertFor Sale: Protective sheets for welding boxes
27.03.2024 | ID: 202418846
For Sale: Regrind black PPPE injection
26.03.2024 | ID: 202418845
-
25.03.2024 | ID: 202418844
Cooperation: Recycling of plastic waste
25.03.2024 | ID: 202418843
For Sale: PA 66 GF 30 regrind natur+white
25.03.2024 | ID: 202418842
-
25.03.2024 | ID: 202418841
For Sale: HDPE regranulate - natur/white
25.03.2024 | ID: 202418839
For Sale: PP-COPO white regranulate
25.03.2024 | ID: 202418838
-
21.03.2024 | ID: 202418823
To purchase: LDPE film, 500 t/month
21.03.2024 | ID: 202418813
-
20.03.2024 | ID: 202418812
To purchase: PE 50 t films in rolls - new
20.03.2024 | ID: 202418810
To purchase: GPPS transparent regrind
06.03.2024 | ID: 202418731
To purchase: Bayblend T 80 XG BBS910
22.02.2024 | ID: 202418671
-
20.02.2024 | ID: 202418666
-
20.02.2024 | ID: 202418665
To purchase: PC/ABS automotive
20.02.2024 | ID: 202418664
For Sale: Original granulates LDPE, HDPE, PE, PP, PET
26.07.2022 | ID: 20229168
Top AdvertFor Sale: Protective sheets for welding boxes
27.03.2024 | ID: 202418846
For Sale: Regrind black PPPE injection
26.03.2024 | ID: 202418845
-
25.03.2024 | ID: 202418844
For Sale: PA 66 GF 30 regrind natur+white
25.03.2024 | ID: 202418842
-
25.03.2024 | ID: 202418841
For Sale: HDPE regranulate - natur/white
25.03.2024 | ID: 202418839
For Sale: PP-COPO white regranulate
25.03.2024 | ID: 202418838
-
25.03.2024 | ID: 202418837
Upcoming Events
01.04.2024 - 30.04.2024 | Paríž
03.04.2024 - 05.04.2024 | Tashkent
09.04.2024 - 12.04.2024 | Mníchov
09.04.2024 - 11.04.2024 | Gorinchem
11.04.2024 - 14.04.2024 | Bratislava
15.04.2024 - 19.04.2024 | Düsseldorf
16.04.2024 - 18.04.2024 | Abu Dhabi
16.04.2024 - 18.04.2024 | Bydgoszcz
17.04.2024 - 20.04.2024 | Istanbul
25.03.2024
26.03.2024
01.04.2024
03.04.2024
09.04.2024
Project management - effective project management
25.03.2024
10.04.2024
Training - Injection moulding technology I.
15.04.2024
Festival of personnel and talent development
16.04.2024
17.04.2024
Job offers
Store manager - Ecocycle s.r.o
25.03.2024
Brusiè na kulato - KOVOROB, s.r.o.
22.03.2024
Head of tool shop - KOVOROB, s.r.o.
22.03.2024
Designer of plastic injection molds - KOVOROB, s.r.o.
22.03.2024
Warehouseman/warehouse (valid VZV license as a condition) - EXPLAST Slovensko, s.r.o.
14.03.2024
Adjuster - AIS Automotive Interior Systems Slovakia s.r.o.
13.03.2024
Toolmaker - AIS Automotive Interior Systems Slovakia s.r.o.
13.03.2024
Plastic processing worker - Hard Plastic Recycling s.r.o.
13.03.2024
Sales Representative - ULTRAPOLYMERS, s.r.o.
12.03.2024