Weekly commodity price report
Here are the market prices of various types of commodity plastics PE-LD, PE-HD, PP and PS in Central and Eastern Europe with a delay of 5 weeks. The data was processed by our partner myCEPPI.
Are you interested in current prices for commodity plastics? You can order Weekly polymer price reports from our editors.
Prices for this week 27/2017
Polyolefin price correction in July
The following factors influenced “commodity” polymer prices and price expectations last week:
- balanced supply,
- low demand,
- BRENT oil price 47.92 USD, tendency of dropping prices
- EUR getting stronger, EUR/USD exchange rate permanently close to 1.14
- Monomer (C2) and propylene monomer (C3) price reduction by 50 €.
In detail
The 50 € price drop surprised the market. Last week traders have already forecast a dynamic demand for July. They were of opinion that purchases would start as early as in July, as polymer prices have dropped to a level not seen for a long time. In advance market players calculated with a monomer price drop by 20-30 €, the reduction by 50 € is a surprise.
The price drop by 20-30 € happened as early as June both in case of PE and PP. The question is whether there is going to be another drop by 20 €. Our answer is: there will be some producers, who will do that, others won’t.
The monomer price drop by 50 € has also one absolute advantage. This allows producers with prices stuck on high level to bring them back to the level of competitors. In this way we can anticipate that on markets with high prices (e.g. in Hungary) there will be a major price correction, reduction both in case of PP and PE.
The extent of the styrene monomer price change was not known at the time when our report was written, it is also hard to forecast it, both minor decrease and slight increase are possible. The PS market is still balanced. This week the July price of SM came into the focus of interest.
Polyolefin grades
In case of LDPE the price ranges were unchanged, the market is already waiting for the price ranges to hit bottom. The lowest prices remained within the still very broad range of 1,130-1,220 €. The price range for medium-sized buyers is 1,230-1,270 €. Here there are also sufficient quantities of goods available. In case of the July prices a price drop by 20-30 € is anticipated. This can be different, depending on the buyer and producer concerned, the price drop by 50 € allows to pull the two extreme values of the price ranges together as we have indicated in our forecasts.
Low HDPE demand continued and it is not expected to increase in July either. On the average we anticipate a price decrease by 30-50 € and the two extreme values of the price range getting closer. It is possible that some prices of Serbian producers will be below 1,000 €.
The pipe market is dynamic, there is season for those products. We do not expect major price drop, prices will be reduced by an average 25-45 €.
LLDPE C4 supply is still low, but the product is absolutely following monomer prices, thus we anticipate a price drop by 40-60 €, the new price range will be 1,100-1,150 €. The reason is in particular that due to the € getting stronger an increasing quantity of imported goods arrives in Central-Europe as well.
PPH demand is consistent. The price range of simple grades is still 1,050-1,100 €. Unfortunately the monomer price reduction by 50 € at the southern producers of the region “pushes” prices below 1,000 €. Such a thing did not happen for a long time. In case of PPH the absolute necessity of a price correction exceeding monomer prices is palpable in case of many producers. In this way prices will get into balance slowly, by the middle of the month only.
In case of PPC we anticipate a price drop by 40-60 €. The latter will be the price correction of prices sticking on high price level. Large buyers can buy in a price range of 1,140-1,180, medium-sized ones in a range of 1,190-1,220 €. Because of the expected correction it will take time for prices to get balanced.
In case of PPR we anticipate no surprises, following monomer prices is the probable scenario. Depending on the grade, the new prices will be in a range of 1,150-1,270 €.
The prices of the last week and the producer price ranges expected for early July are presented in the table below (full truck load 20-22.5 t):
Grade name | Typical polymer price ranges in the last week of June, 2017, Central Europe (€/ton) | Expected polymer price ranges in the first week of July, 2017, Central Europe (€/ton) |
HDPE BM | 1,080-1,200 | 1,020-1,150 |
HDPE Film | 1,080-1,200 | 1,000-1,150 |
HDPE IM | 1,050-1,190 | 970-1,160 |
HDPE Pipe (100) | 1,270-1,350 | 1,225-1,300 |
LDPE Film | 1,130-1,270 | 1,100-1,210 |
LDPE GP | 1,130-1,270 | 1,100-1,210 |
LLDPE C4 | 1,150-1,200 | 1,100-1,150 |
PPC | 1,180-1,270 | 1,140-1,200 |
PPH IM | 1,060-1,200 | 990-1,150 |
PPH Raffia | 1,050-1,150 | 970-1,160 |
PPR | 1,200-1,310 | 1,160-1,250 |
GPPS | 1,250-1,320 | n/a |
HIPS | 1,390-1,480 | n/a |
EPS | 1,320-1,400 | n/a |
Polystyrene grades
The styrene monomer price is not yet known. Market players, buyers do not anticipate significant price changes in July. For the time being even the direction is a question mark, as the SM price underwent a downward correction, but PS prices from European source show an increase.
The main season for EPS will start in July, the ideal thing would be a slightly increasing SM price. In that case major disturbances on the market could be avoided. According to the opinion of market players an increase by 20-30 € would be ideal, and this price would also follow the increased demand for EPS. The ideal price range would be 1,340-1,420 €.
GPPS demand is good, supply is broad. There is a strong, increasing import supply from Iran, Saudi-Arabia, Egypt and Russia alike. This means that local producers have to get adapted to import prices that are getting cheaper and cheaper due to the strong €. The market is under pressure to reduce prices, but the price of SM will determine the direction. At any rate it is sure that in case of increasing SM it will be difficult to enforce price increase.
In case of HIPS demand is good and supply is stable. We experienced no change compared to last week. The price change of July will absolutely be following monomer prices.
Type | Price |
---|---|
HDPE blow molding | 1178 € / t |
HDPE film | 1171 € / t |
HDPE injection molding | 1157 € / t |
HDPE pipe (100) | 1313 € / t |
LDPE film | 1240 € / t |
LDPE general purpose | 1247 € / t |
PP co-polymer injection molding | 1241 € / t |
PP homo-polymer fiber | 1131 € / t |
PP homo-polymer injection molding | 1143 € / t |
PPR | 1272 € / t |
GPPS | 1315 € / t |
HIPS | 1400 € / t |
EPS | 1330 € / t |
myCEPPI – a new voice and new approach on the plastics industry consulting and business intelligence market. With our expert advice, you can get a detailed, up-to-date and tailor-made picture of the Central and Eastern European plastics market and its main trends, data, news and key players.
Our services rely on our personal, regular and in-depth relations with players of the CEE plastics industry.
Each month, we conduct hundreds of interviews and telephone calls with industry players – plastics converters, traders, resin manufacturers – and we are also present at the biggest regional plastics trade fairs and conferences.
The information we collect in the process forms the basis of our weekly price report and market analysis; it feeds into our plastics industry company database; and it serves as the starting point for our multi-level consulting services for companies that need help sizing up, entering or navigating a specific market.
Our experts possess decades of plastics industry experience, as well as fluency in several regional languages.
Our partners include
- key players of the CEE plastics industry – the resin
- master-batch and machinery manufacturers
- distributors, and plastics converters that shape market trends across the region.
We would be happy to welcome you as a partner; please do not hesitate to contact us!
(László Büdy, Managing director, head of consulting)
Price history
- 2024:
- 2023:
- 2022:
- 2021:
- 2020:
- 2019:
- 2018:
- 2017:
Latest Classifieds
-
05.03.2024 | ID: 202418726
Top Advert Cooperation: Nezaplatené faktúry firmou Industry Storm s.r.o.
19.04.2024 | ID: 202418993
-
18.04.2024 | ID: 202418992
-
18.04.2024 | ID: 202418991
-
18.04.2024 | ID: 202418990
To purchase: PPSU regrind banner
17.04.2024 | ID: 202418988
For Sale: Packaging press PL 12
17.04.2024 | ID: 202418987
To purchase: POM C regrind colour, white, natur
17.04.2024 | ID: 202418986
-
16.04.2024 | ID: 202418984
To purchase: PPSU regrind banner
17.04.2024 | ID: 202418988
To purchase: POM C regrind colour, white, natur
17.04.2024 | ID: 202418986
To purchase: Package quality LDPE film. 500 t/month
15.04.2024 | ID: 202418966
To purchase: Dirty granulates from ground
15.04.2024 | ID: 202418964
To purchase: PC and PMMA waste, regrinds, lumps etc.
11.04.2024 | ID: 202418943
To purchase: PET transparent trays, only Central Europe due to shipping costs
10.04.2024 | ID: 202418939
To purchase: PA6.6 GF25, TECHNYL A218, original
09.04.2024 | ID: 202418928
-
09.04.2024 | ID: 202418927
-
09.04.2024 | ID: 202418924
-
05.03.2024 | ID: 202418726
Top Advert -
18.04.2024 | ID: 202418992
-
18.04.2024 | ID: 202418991
-
18.04.2024 | ID: 202418990
For Sale: Packaging press PL 12
17.04.2024 | ID: 202418987
-
16.04.2024 | ID: 202418984
-
15.04.2024 | ID: 202418980
For Sale: PP vstrekovací - drť biela
15.04.2024 | ID: 202418979
For Sale: Drť EVA Escorene UL00514
15.04.2024 | ID: 202418978
Upcoming Events
22.04.2024 - 26.04.2024 | Hannover
22.04.2024 - 26.04.2024 | Sao Paulo
23.04.2024 - 25.04.2024 | Maastricht
23.04.2024 - 26.04.2024 | Shanghai
23.04.2024 - 26.04.2024 | Wels
23.04.2024 - 25.04.2024 | Varšava
06.05.2024 - 10.05.2024 | Orlando
Saudi Plastics and Petrochem 2024
06.05.2024 - 09.05.2024 | Rijád
06.05.2024 - 09.05.2024 | Stuttgart
16.04.2024
16.04.2024
17.04.2024
17.04.2024
22.04.2024
Festival of personnel and talent development
16.04.2024
17.04.2024
Training - Injection moulding technology II.
17.04.2024
17.04.2024
Training - How to crack plastic
22.04.2024
Job offers
-
11.04.2024
Plastic worker, gluing staff - FORM s.r.o.
10.04.2024
Logistics, warehouse and shipping supervisor - KNP s.r.o.
09.04.2024
Warehouseman - AIS Automotive Interior Systems Slovakia s.r.o.
09.04.2024
Sales representative / sales specialist - Plastcom, spol. s r.o.
04.04.2024
Maintenance and operation of the production line - Plastcom, spol. s r.o.
04.04.2024
Quality control technician - ESOX-PLAST s.r.o.
04.04.2024
Master of professional training - ESOX-PLAST s.r.o.
04.04.2024
Store manager - Ecocycle s.r.o
25.03.2024