Weekly commodity price report
Here are the market prices of various types of commodity plastics PE-LD, PE-HD, PP and PS in Central and Eastern Europe with a delay of 5 weeks. The data was processed by our partner myCEPPI.
Are you interested in current prices for commodity plastics? You can order Weekly polymer price reports from our editors.
Prices for this week 18/2017
Roll over and drop
The following factors influenced “commodity” polymer prices and price expectations last week:
- waiting came to be general on the polymer market, converters wait for better, cheaper prices in May,
- therefore the demand is low,
- prices falling in the last week of April,
- the feedstock inventory level of polyolefin converters is high,
- fluctuating BRENT oil price again lower than 55 USD,
- there is import from outside of Europe on the market again, but this quantity is not yet high,
- weak EUR, yet getting stronger
- Ethylene (C2) and propylene (C3) roll-over,
- styrene monomer price is not yet known, but benzene price increased by 9 EUR only, this means practically roll over also in case of SM
- in spite of the maintenance season stable monomer and propylene supply.
In detail
Europe had a silent week again. There were high expectations as to where monomer prices would start to go. In case of olefins there was an answer as soon as on Wednesday: roll-over. According to plastic converters this shall at any rate mean price reduction. The price of styrene monomer is not yet known, but polymer producers anticipate also price reduction. Price reduction will take place only to the debit of the margin of polymer producers. The market is turning, the margin increasing since 2014 seems to come to a halt. Polymer producers are forced to give back from their profits to plastic converters.
In the opinion of plastic converters it is high time for this, as the demand for finished products dropped significantly or is stagnating because of the high prices. Plastics are no longer a cheap solution in packaging, in certain areas substitution with other materials (e.g. paper) has started. Price reduction is unavoidable or the plastics market will stagnate or drop.
The biggest obstacle to the inflow of imported goods was the weak EUR so far, but now the EUR/USD rate is close to 1.1, which can motivate import suppliers during the next months. Increasing import is all the more probable as during the first 2 months of the year European PO and PS import was hardly one third of that last year, which was first of all due to the cheap Euro.
Polyolefin grades
During the last 2 weeks, there was nothing in short supply, but demand. Polyolefin converters kept waiting and the results are visible. Inventories at polymer producers increase. Producers with lower cash flow already run out of patience. The Serbian PPH has reduced the price of its inventories that are to be paid immediately and that can be picked up immediately by some 60 € to 1,100 EUR last Monday. Probably also Rompetrol and Lukoil Bulgaria will follow this steep reduction. The average PPH price that stabilized at about 1,200 € so far, can quickly come close to 1,100 € in the southern region. Major CE producers will expectedly try curbing PPH price drop, in their case a PPH price drop by 0-20 € is probable.
The erosion of PPC prices continued last week. The typical trading price range was in the last week of April 1,250-1,290 €, this is by 40-50 € lower than the price at the beginning of the month. Producers strive for roll-over, but converters will probably be willing to accept roll-over on the price level of end of April only. This means a clear price drop compared to the prices early April.
PPR has been stable for months, supply and demand are balanced, the typical buying price range was 1,320-1,380 € last week, but also here a slight price drop (-15-20 €) can be expected.
HDPE sales have been, with the exception of pipe and extrusion grades, in trouble for months. Expectedly price drop will start also here in the southern region, and the price of film and unimodal BM grades will drop as early as early May by 20-40 EUR. Bimodal HDPE producers will expectedly try roll-over, but all-in-all a price drop by 0-20 € can be anticipated.
In case of HDPE pipe grades stability is to be expected because of the growing demand, in this way roll-over, or even a slight price increase by 10-15 EUR is possible.
In case of LLDPE C4 the market situation is unchanged, the typical price range is 1,240-1,280 €/t. The market expects increasing import supply and dropping prices. The new price range in May is expected to be 1,220-1,240 EUR.
LDPE supply is still short, but the demand is also here lower than the one we are used to in April. Prices did not change significantly last week, neither producers, nor traders forced sales. Typical trading range at the end of April: 1,290-1,330 EUR. Roll-over and the price range getting narrower can be expected in May.
Expectedly polyolefin price reduction will start as early as in May, but a major price drop is probable in June-July. Also plastic converters anticipate this, therefore they will adjust also their purchases to this. They will probably follow a cautious purchasing policy. In this way polyolefin demand will remain to be low.
The prices of the last weeks and expectations for the next week are presented in the table below:
Grade name | Polymer price ranges in April, 2017, Central Europe (€/ton) | Expected price ranges in May, 2017, Central Europe (€/ton) |
HDPE BM | 1,160-1,380 | 1,160-1,340 |
HDPE Film | 1,180-1,380 | 1,160-1,340 |
HDPE IM | 1,200-1,380 | 1,180-1,380 |
HDPE Pipe (100) | 1,350-1,450 | 1,350-1,450 |
LDPE Film | 1,290-1,480 | 1,280-1,440 |
LDPE GP | 1,300-1,490 | 1,280-1,450 |
LLDPE C4 | 1,250-1,350 | 1,220-1,280 |
PPC | 1,250-1,400 | 1,240-1,340 |
PPH IM | 1,100-1,300 | 1,100-1,240 |
PPH Raffia | 1,100-1,250 | 1,100-1,250 |
PPR | 1,350-1,460 | 1,330-1,450 |
GPPS | 1,490-1,650 | n/a |
HIPS | 1,680-1,800 | n/a |
EPS | 1,510-1,620 | n/a |
Polystyrene grades
The price of SM is not yet known, but in the opinion of the market players reduction is for sure. These expectations were palpable as early as last week. PS prices started dropping. Traders tried getting rid of their “expensive” inventories.
This happened to EPS as well, where in spite of the high demand we saw dropping prices. The typical trading price range was 1,470-1,550 € last week.
But on the GPPS market lacking demand was clearly palpable. The typical range of buying prices was: 1,500-1,580 €/t. Further monomer following price reduction is probable.
In case of HIPS an interesting situation is unfolding, prices were torn apart. After the shortage we had so far, in the southern region (Serbia) appeared the import from the Far-East at extremely low price: here the price range of HIPS was 1,480-1,580 € last week.
The situation will be also here similar to that of the polyolefin grades. The market expects that there will be a price reduction for sure lasting until the end of July. In this way we shall prepare for increasing import supply due to the Euro getting stronger. This will at any rate keep up the dropping price tendency and will expectedly prompt European producers to reduce the spread.
Type | Price |
---|---|
HDPE blow molding | 1269 € / t |
HDPE film | 1252 € / t |
HDPE injection molding | 1270 € / t |
HDPE pipe (100) | 1361 € / t |
LDPE film | 1335 € / t |
LDPE general purpose | 1342 € / t |
PP co-polymer injection molding | 1295 € / t |
PP homo-polymer fiber | 1201 € / t |
PP homo-polymer injection molding | 1206 € / t |
PPR | 1392 € / t |
GPPS | 1610 € / t |
HIPS | 1700 € / t |
EPS | 1578 € / t |
myCEPPI – a new voice and new approach on the plastics industry consulting and business intelligence market. With our expert advice, you can get a detailed, up-to-date and tailor-made picture of the Central and Eastern European plastics market and its main trends, data, news and key players.
Our services rely on our personal, regular and in-depth relations with players of the CEE plastics industry.
Each month, we conduct hundreds of interviews and telephone calls with industry players – plastics converters, traders, resin manufacturers – and we are also present at the biggest regional plastics trade fairs and conferences.
The information we collect in the process forms the basis of our weekly price report and market analysis; it feeds into our plastics industry company database; and it serves as the starting point for our multi-level consulting services for companies that need help sizing up, entering or navigating a specific market.
Our experts possess decades of plastics industry experience, as well as fluency in several regional languages.
Our partners include
- key players of the CEE plastics industry – the resin
- master-batch and machinery manufacturers
- distributors, and plastics converters that shape market trends across the region.
We would be happy to welcome you as a partner; please do not hesitate to contact us!
(László Büdy, Managing director, head of consulting)
Price history
- 2024:
- 2023:
- 2022:
- 2021:
- 2020:
- 2019:
- 2018:
- 2017:
Latest Classifieds
-
05.03.2024 | ID: 202418726
Top Advert Cooperation: Nezaplatené faktúry firmou Industry Storm s.r.o.
19.04.2024 | ID: 202418993
-
18.04.2024 | ID: 202418992
-
18.04.2024 | ID: 202418991
-
18.04.2024 | ID: 202418990
To purchase: PPSU regrind banner
17.04.2024 | ID: 202418988
For Sale: Packaging press PL 12
17.04.2024 | ID: 202418987
To purchase: POM C regrind colour, white, natur
17.04.2024 | ID: 202418986
-
16.04.2024 | ID: 202418984
To purchase: PPSU regrind banner
17.04.2024 | ID: 202418988
To purchase: POM C regrind colour, white, natur
17.04.2024 | ID: 202418986
To purchase: Package quality LDPE film. 500 t/month
15.04.2024 | ID: 202418966
To purchase: Dirty granulates from ground
15.04.2024 | ID: 202418964
To purchase: PC and PMMA waste, regrinds, lumps etc.
11.04.2024 | ID: 202418943
To purchase: PET transparent trays, only Central Europe due to shipping costs
10.04.2024 | ID: 202418939
To purchase: PA6.6 GF25, TECHNYL A218, original
09.04.2024 | ID: 202418928
-
09.04.2024 | ID: 202418927
-
09.04.2024 | ID: 202418924
-
05.03.2024 | ID: 202418726
Top Advert -
18.04.2024 | ID: 202418992
-
18.04.2024 | ID: 202418991
-
18.04.2024 | ID: 202418990
For Sale: Packaging press PL 12
17.04.2024 | ID: 202418987
-
16.04.2024 | ID: 202418984
-
15.04.2024 | ID: 202418980
For Sale: PP vstrekovací - drť biela
15.04.2024 | ID: 202418979
For Sale: Drť EVA Escorene UL00514
15.04.2024 | ID: 202418978
Upcoming Events
22.04.2024 - 26.04.2024 | Hannover
22.04.2024 - 26.04.2024 | Sao Paulo
23.04.2024 - 25.04.2024 | Maastricht
23.04.2024 - 26.04.2024 | Shanghai
23.04.2024 - 26.04.2024 | Wels
23.04.2024 - 25.04.2024 | Varšava
06.05.2024 - 10.05.2024 | Orlando
Saudi Plastics and Petrochem 2024
06.05.2024 - 09.05.2024 | Rijád
06.05.2024 - 09.05.2024 | Stuttgart
16.04.2024
16.04.2024
17.04.2024
17.04.2024
22.04.2024
Festival of personnel and talent development
16.04.2024
17.04.2024
Training - Injection moulding technology II.
17.04.2024
17.04.2024
Training - How to crack plastic
22.04.2024
Job offers
-
11.04.2024
Plastic worker, gluing staff - FORM s.r.o.
10.04.2024
Logistics, warehouse and shipping supervisor - KNP s.r.o.
09.04.2024
Warehouseman - AIS Automotive Interior Systems Slovakia s.r.o.
09.04.2024
Sales representative / sales specialist - Plastcom, spol. s r.o.
04.04.2024
Maintenance and operation of the production line - Plastcom, spol. s r.o.
04.04.2024
Quality control technician - ESOX-PLAST s.r.o.
04.04.2024
Master of professional training - ESOX-PLAST s.r.o.
04.04.2024
Store manager - Ecocycle s.r.o
25.03.2024