Trhové ceny komoditných plastov týždenne
Uvádzame tu trhové ceny rôznych typov komoditných plastov PE-LD, PE-HD, PP a PS v strednej a východnej Európe s oneskorením 5 týždňov. Údaje spracoval náš partner myCEPPI.
Zaujímajú Vás aktuálne ceny komoditných plastov? Objednajte si túto službu Týždenné ceny komoditných plastov u nás v redakcií.
Ceny na týždeň 42/2018
The following factors influenced “commodity” polymer prices and price expectations last week:
- BRENT oil price 80.26 USD/barrel, increasing prices,
- EUR/USD: 1.1558, EURO getting weaker
- NAPHTHA: 676.895 USD/t, decreasing prices
- average demand, in line with the season,
- Some specific grades happen to be short of supply, yet maintenance activities cause no supply problems.
Ongoing and expected maintenance activities in Central-Europe
Company name | Site | Product manufactured | Annual capacity (kt) | Shutdown period |
BOP | Plock (Poland) | HDPE | 320 | 1-31 October 2018 |
BOP | Plock (Poland) | LDPE | 100 | 1-31 October 2018 |
BOP | Plock (Poland) | PP | 400 | 4-21 October 2018 |
MOL Petrochemical | Tiszaújváros (Hungary) | PP | 100 | September 24 to October 12, 2018 |
MOL Petrochemical | Tiszaújváros (Hungary) | HDPE | 220 | September 24 to October 12, 2018 |
Slovnaft Bratislava | Bratislava (Slovakia) | PP | 255 | October 15, 2018 |
Rompetrol Petrochemicals | Navodari (Romania) | LDPE | 60 | October 28 to November 12, 2018 |
Rompetrol Petrochemicals | Navodari (Romania) | PP | 80 | October 28 to November 12, 2018 |
Both the PE and PP plant of Unipetrol are expected to restart this Monday (they did not restart last week).
In addition supply is getting short also due to the shutdowns in WE. Compared to the last week oil and naphtha prices turned back, this curbed price increase expectations. Last week the demand was in line with the season, or slightly lower. Most buyers are rather guessing as to November. In the southern region some major PPC converters tried to buy in advance, first of all due to the supply getting shorter and the price increase expectations. But this is not typical in the whole CE region.
The fall season slowly comes to an end and the inventory levels of converters are low. But from the second half of November bonus maximizing purchases might be a driving force of demand. In the meantime polymer producers anticipate slightly increasing olefin monomer prices, and converters expect rather slightly dropping prices.
In detail
Polyolefin grades
The LDPE market did not change compared to last week. The typical price range was 1,060-1,140 €/t last week. This will probably not change until the end of October.
HDPE demand is still good, while supply is short. But the expected restart of Unipetrol on Monday will balance the market first of all in case of IM and BM grades. The typical CE price range is 1,200-1,260 €/t.
HDPE (100) started dropping last week. The end of the season is seemingly at hand. In case of direct buys from the producer the typical price range is 1,350-1,450 €/t, depending on the size and location of the buyer.
The typical prices of LLDPE C4 did not change either, they were in a range of 1,080 and 1,150 €/t last week. Demand is good and in line with the season.
mLLDPE prices were in a range of 1,260-1,400 €/t last week. There is an average demand, in line with the season. Supply is abundant, rather oversupply is typical.
PPH market is stable. In spite of the shutdowns there was a temporary shortage in case of some grades only. There were temporary supply problems in the southern region only. FCA prices are in a range of 1,170-1,190 €. There seems to be no reason for concern, the expected restart of Unipetrol will compensate the shutdown of the PP plant of Slovnaft. Producers seem to have prepared well the shutdowns, in this way no major supply shortage is to be expected. PPH Raffia prices were in a range of 1,190-1,240 €. The price of non-special PPM IM products with medium melt index is: in a range of 1,210-1,260, while that of products with high melt index starts from 1,250 €.
There is no change on the PPC market. In the direct polymer producer and plastic converter relations a price level higher than 1,300 € is typical. On the free market (via traders) substitute grades are to have at prices starting from 1,250 €. Typical prices of non-special grades were in a range of 1,280-1,400 €/t in Central-Europe last week.
In case of PPR, compared to September there was roll-over, the demand is stable, in line with the season. The price range was 1,320-1,460 €/t, depending on the grade, producer and application area last week.
The prices of the last week are presented in the table below (full truck load 20-22.5 t):
Grade name | Typical polymer price ranges in the second week of Oct, 2018, Central Europe (€/ton) |
HDPE BM | 1,190-1,270 |
HDPE Film | 1,190-1,300 |
HDPE IM | 1,180-1,250 |
HDPE Pipe (100) | 1,420 -1,560 |
LDPE Film | 1,080-1,180 |
LDPE GP | 1,080-1,180 |
LLDPE C4 | 1,080-1,190 |
PPC | 1,300-1,460 |
PPH IM | 1,220-1,380 |
PPH Raffia | 1,220-1,300 |
PPR | 1,330-1,530 |
GPPS | 1,360-1,550 |
HIPS | 1,400-1,600 |
EPS | 1,500-1,650 |
Polystyrene grades
EPS demand was good, in line with the season last week. High demand arrived at last also in Hungary. Due to the good demand market prices decreased by 50-65 €, not reaching the full monomer price decrease. Typical prices are in a range of 1,500-1,650 €/t.
The demand for GPPS and HIPS is still weak. The full monomer price reduction was accepted on the market. Converters are waiting for further monomer and polymer price decrease in November and December as well. The price range of imported GPPS is 1,380-1,420 € and in case of HIPS prices are in a range of 1,400-1,450 €/t. Last week the price range of GPPS produced in Europe was 1,450- 1,560 €, while the range of HIPS prices was 1,550-1,650 € depending on the grade and application area.
Typ | Cena |
---|---|
HDPE blow molding | 1213 € / t |
HDPE film | 1213 € / t |
HDPE injection molding | 1199 € / t |
HDPE pipe (100) | 1428 € / t |
LDPE film | 1122 € / t |
LDPE general purpose | 1118 € / t |
PP co-polymer injection molding | 1335 € / t |
PP homo-polymer fiber | 1252 € / t |
PP homo-polymer injection molding | 1252 € / t |
PPR | 1393 € / t |
GPPS | 1443 € / t |
HIPS | 1526 € / t |
EPS | 1549 € / t |
myCEPPI - nový prístup v poradenstve a v spravodajstve v oblasti plastov. Poskytneme Vám detailný, aktuálny a na mieru vytvorený obraz o trhu s plastami v strednej a východnej Európe.
Vychádzame z našich osobných a pevných vzťahoch s významnými hráčmi v plastikárskom priemysle v strednej a východnej Európe. Každý mesiac uskutočňujeme stovky osobných a telefonických hovorov so spracovateľmi plastov, distribútormi a výrobcami surovín, zúčastňujeme sa odborných veľtrhov a konferencií.
Informácie, ktoré zhromažďujeme v rámci tohto procesu, tvoria základ našich týždenných cenových reportov komoditných plastov. Obsahujúce taktiež analýzu trhu. Tieto reporty taktiež slúžia ako východiskový bod pre naše ďalšie konzultačné služby ktoré poskytujeme spoločnostiam, ktoré potrebujú pomoc pri vstupe na trh, prípadne pri rozširovaní svojho biznisu, zorientovaní sa v situácií na trhu, atď. Naši odborníci majú desiatky rokov skúseností s plastami.
Radi Vám poskytneme naše služby.
História cien
- 2024:
- 2023:
- 2022:
- 2021:
- 2020:
- 2019:
- 2018:
- 2017:
Najnovšie inzeráty
Spolupráca: Voľné výrobné kapacity na vstrekolisoch a extruznej linke 950T, 1300T, 2700T
04.04.2024 | ID: 202418891
Top inzerát-
05.03.2024 | ID: 202418726
Top inzerát -
26.04.2024 | ID: 202419032
Predám: PA6 Slovamid 6 FRC 2 LS originál oranžový, sivý
26.04.2024 | ID: 202419031
Predám: PP regranulát farba zelená, modrá MFI 8-12
25.04.2024 | ID: 202419030
-
24.04.2024 | ID: 202419027
Predám: Plastová drť čierna PPPE,350€/t
24.04.2024 | ID: 202419026
-
24.04.2024 | ID: 202419025
-
23.04.2024 | ID: 202419024
-
26.04.2024 | ID: 202419032
Kúpim: Balíková LDPE fólia ,500 t/mesiac
22.04.2024 | ID: 202419013
Kúpim: Špinavý zvyškový granulát z podláh
22.04.2024 | ID: 202419011
-
17.04.2024 | ID: 202418988
Kúpim: POM drť farebná, biela, natur
17.04.2024 | ID: 202418986
-
11.04.2024 | ID: 202418943
Kúpim: PET odrezky z výroby, tácky, iba transparent
10.04.2024 | ID: 202418939
Kúpim: PA6.6 GF25, TECHNYL A218, originál
09.04.2024 | ID: 202418928
-
09.04.2024 | ID: 202418927
-
05.03.2024 | ID: 202418726
Top inzerát Predám: PA6 Slovamid 6 FRC 2 LS originál oranžový, sivý
26.04.2024 | ID: 202419031
Predám: PP regranulát farba zelená, modrá MFI 8-12
25.04.2024 | ID: 202419030
-
24.04.2024 | ID: 202419027
Predám: Plastová drť čierna PPPE,350€/t
24.04.2024 | ID: 202419026
-
24.04.2024 | ID: 202419025
-
23.04.2024 | ID: 202419024
Predám: HDPE fólia v rolkách 30 t
22.04.2024 | ID: 202419021
Predám: PA 6.6 Ultramid A3U42G6 drť
22.04.2024 | ID: 202419020
Najbližšie výstavy
06.05.2024 - 10.05.2024 | Orlando
Saudi Plastics and Petrochem 2024
06.05.2024 - 09.05.2024 | Rijád
06.05.2024 - 09.05.2024 | Stuttgart
07.05.2024 - 10.05.2024 | Budapešť
07.05.2024 - 10.05.2024 | Budapest
13.05.2024 - 17.05.2024 | München
14.05.2024 - 17.05.2024 | Jönköping
14.05.2024 - 16.05.2024 | Rheda-Wiedenbrück
Romexpo Metalshow TIB - Bukurešť 2024
14.05.2024 - 17.05.2024 | Bukurešť
23.04.2024
23.04.2024
23.04.2024
23.04.2024
06.05.2024
23.04.2024
Mitsubishi Electric organizuje Inžiniersky workshop: Využitie prediktívnej údržby v pohonoch
23.04.2024
Vstrekovanie plastov pre netechnológov
24.04.2024
Školenie - Konštruktér plastových dielov
25.04.2024
Vtokové systémy vstrekovacích foriem, organizovaný spoločnosťou Plasty Gabriel s.r.o.
25.04.2024
Ponuky práce
Nastavovač vstrekolisov - Tristone Flowtech Slovakia s.r.o.
11.04.2024
Plastikár, lepiaci personál - FORM s.r.o.
10.04.2024
Supervisor logistiky, skladu a expedície - KNP s.r.o.
09.04.2024
Skladník - AIS Automotive Interior Systems Slovakia s.r.o.
09.04.2024
Obchodný zástupca / špecialista predaja - Plastcom, spol. s r.o.
04.04.2024
Údržba a obsluha chodu výrobnej linky - Plastcom, spol. s r.o.
04.04.2024
Technik kontroly kvality - ESOX-PLAST s.r.o.
04.04.2024
Majster odborného výcviku - ESOX-PLAST s.r.o.
04.04.2024
Manažér obchodu - Ecocycle s.r.o
25.03.2024