Weekly commodity price report
Here are the market prices of various types of commodity plastics PE-LD, PE-HD, PP and PS in Central and Eastern Europe with a delay of 5 weeks. The data was processed by our partner myCEPPI.
Are you interested in current prices for commodity plastics? You can order Weekly polymer price reports from our editors.
Prices for this week 16/2017
Before Easter
The following factors influenced “commodity” polymer prices and price expectations last week:
- short workweek because of Easter,
- the demand generated by plastic converters is still low in some segments, they are waiting for cheaper prices,
- April is traditionally the high season,
- BRENT oil price higher than 55 USD and increasing,
- import appeared (Middle- and Far-East)
- dropping Asian monomer and polymer prices,
- weak Euro,
- Ruble getting weaker,
- in spite of the maintenance season stable, though lower monomer supply.
In detail
In the second week of April the general mood pointed towards price reduction on the market. Also producers followed the expectations of converters. In spite of this demand was not too high, due to the short week before Easter and due to the holidays. Because of the lower WE demand the gap between polymer prices is slowly closing between WE and CE as the same has started in case of monomer prices between markets in Europe and markets outside of Europe.
Though ethylene and propylene prices did not drop, but the roll over in case of ethylene and the 15 EUR propylene increase surprised the market. Everyone was waiting for a resolute but not too high monomer price increase, as the utilization of the European ethylene and propylene capacities is at 86-88% now, while the demand is stable.
In the middle of April the cracker in Schwechat will shut down: 500,000 t/y of ethylene, 400,000 t/y of propylene capacities will be lost and parallel with it also polymer plants will be shut down. Monomer supply will become shorter during the next two weeks. Cracker maintenances will result in dropping naphtha prices, spot naphtha prices are by 50 € lower than at the beginning of the month. All this means the reduction of self-costs on the side of monomer production, but it is not sure that this means price reduction too. The supply getting shorter on temporary basis is a sign of ethylene and propylene price increase.
In case of styrene monomer the gap is still closing that is the further drop of monomer prices is expected. Here the downward price tendency is clear also in May.
Polyolefin grades
LLDPE C4, PPC, PPH BOPP, PPR supply is short. LDPE shortage has been resolved on temporary basis, but it is hard to sell HDPE and HDPE BM grades in particular.
The LLDPE C4 market is completely import-dependent, as for the time being imported volumes are low, therefore, in spite of the monomer roll over a price increase by 15-30 EUR was accepted on the market.
But the LDPE that was of short supply so far rather started a direction towards price reduction during the last two weeks. Now the lowest prices are at about 1,300 €. Supply is good, but converters have reduced their demand during the last two weeks.
In case of HDPE extrusion grades avoided the price reduction, and in case of HDPE 100 there was a stable price increase by 10-15 EUR. The demand for BM grades is low, and also imported grades became available causing an average price drop by 20 EUR. In case of film grades, with the exception of medium density film market prices dropped.
In case of PPH BOPP grades on overall European level shortage is also high, it is hard to get feedstock, prices are high (the price range is 1,250-1,320 €). On the average a price increase by 30-40 EUR was accepted on the market in April.
Also the other PPH grades keep their price level in spite of the initial panic, and also the lowest prices are now back at a price level of about 1,200 EUR.
In case of PPC the shortage is not dramatic, but just enough to make a price increase slightly exceeding the monomer price increase (15-25 €/ton) accepted on the market. There was a stable PPR price increase by 20-40 € to a different extent depending on the market and on the buyer segment.
The first two weeks of April was characterized by the reduced demand of converters, but due to the changed purchasing strategies, after Easter we expect the major increase of demand.
Though the market and converters anticipate a price drop, but we should remember that we are in the season, demand is good, the further drop of monomer supply can result also in monomer and polymer price increase and can also mean a further dropping supply in case of more wanted grades as well. The price increase of these grades can keep up or increase the overall market price level.
The prices of the last two weeks are presented in the table below:
Grade name | Polymer price ranges in April, 2017, Central Europe (€/ton) |
HDPE BM | 1,160-1,380 |
HDPE Film | 1,180-1,380 |
HDPE IM | 1,200-1,380 |
HDPE Pipe (100) | 1,350-1,450 |
LDPE Film | 1,290-1,480 |
LDPE GP | 1,300-1,490 |
LLDPE C4 | 1,250-1,350 |
PPC | 1,280-1,400 |
PPH IM | 1,190-1,300 |
PPH Raffia | 1,190-1,220 |
PPR | 1,350-1,460 |
GPPS | 1,490-1,650 |
HIPS | 1,680-1,800 |
EPS | 1,510-1,620 |
Polystyrene grades
The styrene monomer price drop by 275 EUR was a necessary correction. Accordingly a correction was necessary also in case of polymer grades. But the intention of producers to decrease their prices to an extent smaller than the SM price drop failed. The market, converters expected much more as the high price level has already seriously prevented the sale of polystyrene grades. In this way in case of certain grades there was a price drop exceeding that of monomer grades.
In case of GPPS we have seen also prices below 1,500 €, but the price range is very broad, exceeding 150 €. GPPS supply is good in spite of the fact that there are no high import quantities on the market. Converters anticipate a further price drop, their demand is precautious, not too strong.
HIPS supply is still low; according also the prices have dropped by 230-250 EUR, not reaching the SM price drop. Demand was in the middle of good and retained during the last week.
There was a very vivid demand for EPS during the last two weeks, as the steeply dropping prices (-200-230 €/t) and the slightly short supply prompted all to buy.
Market players still anticipate a downward SM price correction and dropping polymer prices in May, which will be facilitated also by the import appearing on the European market. Accordingly, those, who can do that, still hold back their purchases, waiting for cheaper prices in May.
Type | Price |
---|---|
HDPE blow molding | 1275 € / t |
HDPE film | 1269 € / t |
HDPE injection molding | 1280 € / t |
HDPE pipe (100) | 1361 € / t |
LDPE film | 1347 € / t |
LDPE general purpose | 1352 € / t |
PP co-polymer injection molding | 1304 € / t |
PP homo-polymer fiber | 1209 € / t |
PP homo-polymer injection molding | 1218 € / t |
PPR | 1392 € / t |
GPPS | 1648 € / t |
HIPS | 1768 € / t |
EPS | 1608 € / t |
myCEPPI – a new voice and new approach on the plastics industry consulting and business intelligence market. With our expert advice, you can get a detailed, up-to-date and tailor-made picture of the Central and Eastern European plastics market and its main trends, data, news and key players.
Our services rely on our personal, regular and in-depth relations with players of the CEE plastics industry.
Each month, we conduct hundreds of interviews and telephone calls with industry players – plastics converters, traders, resin manufacturers – and we are also present at the biggest regional plastics trade fairs and conferences.
The information we collect in the process forms the basis of our weekly price report and market analysis; it feeds into our plastics industry company database; and it serves as the starting point for our multi-level consulting services for companies that need help sizing up, entering or navigating a specific market.
Our experts possess decades of plastics industry experience, as well as fluency in several regional languages.
Our partners include
- key players of the CEE plastics industry – the resin
- master-batch and machinery manufacturers
- distributors, and plastics converters that shape market trends across the region.
We would be happy to welcome you as a partner; please do not hesitate to contact us!
(László Büdy, Managing director, head of consulting)
Price history
- 2024:
- 2023:
- 2022:
- 2021:
- 2020:
- 2019:
- 2018:
- 2017:
Latest Classifieds
-
05.03.2024 | ID: 202418726
Top Advert Cooperation: Nezaplatené faktúry firmou Industry Storm s.r.o.
19.04.2024 | ID: 202418993
-
18.04.2024 | ID: 202418992
-
18.04.2024 | ID: 202418991
-
18.04.2024 | ID: 202418990
To purchase: PPSU regrind banner
17.04.2024 | ID: 202418988
For Sale: Packaging press PL 12
17.04.2024 | ID: 202418987
To purchase: POM C regrind colour, white, natur
17.04.2024 | ID: 202418986
-
16.04.2024 | ID: 202418984
To purchase: PPSU regrind banner
17.04.2024 | ID: 202418988
To purchase: POM C regrind colour, white, natur
17.04.2024 | ID: 202418986
To purchase: Package quality LDPE film. 500 t/month
15.04.2024 | ID: 202418966
To purchase: Dirty granulates from ground
15.04.2024 | ID: 202418964
To purchase: PC and PMMA waste, regrinds, lumps etc.
11.04.2024 | ID: 202418943
To purchase: PET transparent trays, only Central Europe due to shipping costs
10.04.2024 | ID: 202418939
To purchase: PA6.6 GF25, TECHNYL A218, original
09.04.2024 | ID: 202418928
-
09.04.2024 | ID: 202418927
-
09.04.2024 | ID: 202418924
-
05.03.2024 | ID: 202418726
Top Advert -
18.04.2024 | ID: 202418992
-
18.04.2024 | ID: 202418991
-
18.04.2024 | ID: 202418990
For Sale: Packaging press PL 12
17.04.2024 | ID: 202418987
-
16.04.2024 | ID: 202418984
-
15.04.2024 | ID: 202418980
For Sale: PP vstrekovací - drť biela
15.04.2024 | ID: 202418979
For Sale: Drť EVA Escorene UL00514
15.04.2024 | ID: 202418978
Upcoming Events
22.04.2024 - 26.04.2024 | Hannover
22.04.2024 - 26.04.2024 | Sao Paulo
23.04.2024 - 25.04.2024 | Maastricht
23.04.2024 - 26.04.2024 | Shanghai
23.04.2024 - 26.04.2024 | Wels
23.04.2024 - 25.04.2024 | Varšava
06.05.2024 - 10.05.2024 | Orlando
Saudi Plastics and Petrochem 2024
06.05.2024 - 09.05.2024 | Rijád
06.05.2024 - 09.05.2024 | Stuttgart
16.04.2024
16.04.2024
17.04.2024
17.04.2024
22.04.2024
Festival of personnel and talent development
16.04.2024
17.04.2024
Training - Injection moulding technology II.
17.04.2024
17.04.2024
Training - How to crack plastic
22.04.2024
Job offers
-
11.04.2024
Plastic worker, gluing staff - FORM s.r.o.
10.04.2024
Logistics, warehouse and shipping supervisor - KNP s.r.o.
09.04.2024
Warehouseman - AIS Automotive Interior Systems Slovakia s.r.o.
09.04.2024
Sales representative / sales specialist - Plastcom, spol. s r.o.
04.04.2024
Maintenance and operation of the production line - Plastcom, spol. s r.o.
04.04.2024
Quality control technician - ESOX-PLAST s.r.o.
04.04.2024
Master of professional training - ESOX-PLAST s.r.o.
04.04.2024
Store manager - Ecocycle s.r.o
25.03.2024